Introduction
Thank you for choosing WOLTU Dining Chairs. This manual provides detailed instructions for the assembly, operation, and maintenance of your new chairs. Please read this manual carefully before assembly and retain it for future reference.
These ergonomic dining chairs, upholstered in vintage brown faux leather with sturdy metal legs, are designed for comfort and durability in various settings such as dining rooms, living rooms, or offices.
Safety Information
- Ensure all parts are present and undamaged before assembly.
- Assemble the chairs on a soft, clean surface to prevent scratches.
- Do not overtighten screws during assembly to avoid damaging components.
- Keep small parts away from children during assembly.
- Maximum weight capacity: 150 kg (330 lbs). Do not exceed this limit.
- Regularly check all fasteners to ensure they remain tight.
Package Contents
Before starting assembly, verify that all components listed below are included in your package.
- Chair Seats (6 units)
- Chair Legs (6 sets, typically 4 legs per set)
- Assembly Hardware Kit (screws, washers, Allen key)
- Instruction Manual (this document)
Setup and Assembly
Follow these steps to assemble your WOLTU dining chairs. Assembly is designed to be straightforward and can be completed quickly.
- Unpack Components: Carefully remove all parts from the packaging. Lay them out on a soft, flat surface to prevent damage.
Image: WOLTU dining chairs in a dining room setting. This image shows the assembled chairs in a typical use environment. - Attach Legs to Seat: Identify the chair seat and the leg frame. Align the leg frame with the pre-drilled holes on the underside of the seat.
Image: Underside of the chair seat, illustrating the robust metal frame and attachment points for the legs. Note the cross-installed legs for enhanced sturdiness. - Secure with Screws: Use the provided screws and Allen key to firmly attach the legs to the seat. Tighten all screws evenly, but do not overtighten. The cross-installed legs are designed to increase the chair's sturdiness.
Image: A visual representation of the chair's structure, highlighting the strong and stable metal frame and the cross-installed legs that contribute to its durability and weight capacity of 150kg. - Adjust Non-Slip Feet: Once assembled, turn the chair upright. The chairs are equipped with adjustable non-slip feet. Adjust each foot as needed to ensure the chair is stable and level on uneven floors. This also protects your floor from scratches.
Image: Detail of the adjustable non-slip feet. These feet can be rotated to compensate for uneven surfaces, ensuring stability and protecting floors. - Final Check: Gently shake the chair to confirm stability. If any wobbling occurs, re-check the tightness of all screws and re-adjust the feet.
Operating Instructions
Your WOLTU dining chairs are designed for comfortable and versatile use.
- Comfortable Seating: The chairs feature a wide, padded seat and a slightly reclining ergonomic backrest with armrests, providing optimal support for extended periods.
Image: Side profile of the chair, illustrating the ergonomic design of the backrest and armrests that conform to the human body for enhanced comfort. - Versatile Placement: These chairs are suitable for various environments including dining rooms, living rooms, bedrooms (as a vanity or computer chair), or office spaces.
Image: A single WOLTU dining chair positioned as a desk chair in a home office setting, demonstrating its versatility. - Weight Capacity: Each chair is designed to support a maximum weight of 150 kg (330 lbs). Do not exceed this limit to ensure safety and longevity.
Maintenance
Proper care will extend the life and appearance of your WOLTU dining chairs.
- Cleaning the Faux Leather: The vintage faux leather upholstery is easy to clean. For daily maintenance, wipe with a soft, damp cloth. For spills, immediately blot with a clean, dry cloth and then wipe with a slightly damp cloth using mild soap if necessary. Avoid abrasive cleaners or harsh chemicals.
Image: Close-up of the faux leather upholstery, highlighting its texture and ease of cleaning. - Metal Legs: Wipe metal legs with a dry or slightly damp cloth. Avoid using harsh chemicals that could damage the finish.
- Regular Checks: Periodically inspect all screws and connections to ensure they are tight. Retighten if necessary to maintain stability and safety.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause the faux leather to fade or crack. Position chairs away from direct sunlight or use window coverings.
Troubleshooting
Here are solutions to common issues you might encounter:
- Chair is Wobbly:
- Ensure all screws connecting the legs to the seat are fully tightened.
- Adjust the non-slip feet on each leg. Rotate them clockwise or counter-clockwise until the chair is stable on the floor.
- Difficulty Assembling:
- Refer back to the "Setup and Assembly" section and review each step carefully.
- Ensure you are using the correct screws for each part as indicated in the assembly diagram (if provided in the physical manual).
- Do not force parts together; if they don't fit, re-check alignment.
- Scratches on Floor:
- Ensure the adjustable non-slip feet are properly installed and adjusted.
- If the existing feet are worn, consider replacing them or adding felt pads for extra protection.
Specifications
Detailed specifications for the WOLTU EZS03br-6 Dining Chairs:
| Feature | Detail |
|---|---|
| Brand | WOLTU |
| Model Number | EZS03br-6 |
| Color | Brown (Vintage Faux Leather) |
| Material | Faux Leather (Upholstery), Metal (Frame/Legs) |
| Overall Dimensions (Depth x Width x Height) | 41 x 42 x 83.5 cm (16.1 x 16.5 x 32.9 inches) |
| Seat Dimensions (Width x Depth) | 42 cm (16.5 inches) x 41 cm (16.1 inches) |
| Seat Height | 50.5 cm (19.9 inches) |
| Backrest Height | 39 cm (15.4 inches) |
| Armrest Height (from seat) | 17.5 cm (6.9 inches) |
| Item Weight (per chair) | Approx. 6.25 kg (37.5 kg for 6 chairs) |
| Weight Capacity (per chair) | 150 kg (330 lbs) |
| Special Features | Ergonomic design, Padded seat, Armrests, Adjustable non-slip feet |
Warranty and Support
WOLTU is committed to providing high-quality products. For specific warranty information, please refer to the purchase documentation or contact your retailer. Information regarding spare parts availability is not provided in the product specifications.
For further assistance, product support, or to report any issues, please contact WOLTU customer service through the retailer where you purchased the product or visit the official WOLTU brand store online:
