1. Product Overview
The Rittal 3179.800 Blue e+ S wall-mounted cooling unit is designed for efficient thermal management in electrical enclosures and industrial settings. This unit provides powerful cooling to maintain optimal temperatures, ensuring the longevity and performance of your equipment.
Key features include:
- Cooling Capacity: Powerful 1,706.07 BTU/hr cooling unit for efficient thermal management.
- Versatile Power: Dual voltage compatibility with 110/240V and 50/60Hz frequency for flexible installation options.
- Compact Design: Wall-mounted unit measuring 22.4 inches in height, 11.8 inches in width, and 7.83 inches in depth.
- Mounting Type: Easy-to-install wall-mounted configuration ideal for industrial and commercial applications.
- Series Features: Part of the Blue e+ S series, incorporating advanced cooling technology for optimal temperature control.
Figure 1.1: Front view of the Rittal 3179.800 Blue e+ S Wall-Mounted Cooling Unit.
2. Safety Information
Please read all safety instructions carefully before installing, operating, or performing maintenance on the cooling unit. Failure to follow these instructions may result in electric shock, fire, serious injury, or property damage.
- Ensure the power supply is disconnected before any installation or maintenance work.
- Installation must be performed by qualified personnel in accordance with all local and national electrical codes.
- Do not block air inlets or outlets of the unit. Maintain adequate clearance for proper airflow.
- Do not operate the unit if it is damaged or malfunctioning.
- Keep hands and tools away from moving parts during operation.
3. Package Contents
Verify that all components are present and undamaged upon unpacking. The package should contain:
- 1 x Rittal 3179.800 Blue e+ S Wall-Mounted Cooling Unit
- Instruction Manual (this document)
- Mounting hardware (if applicable, check packaging)
4. Setup and Installation
The Rittal 3179.800 is designed for wall-mounted installation. Proper installation is crucial for optimal performance and safety.
4.1 Site Selection
- Choose a location that allows for adequate airflow around the unit.
- Ensure the mounting surface is structurally sound and can support the weight of the unit (approximately 28.7 pounds).
- Consider proximity to the electrical enclosure requiring cooling and power source.
4.2 Mounting the Unit
- Refer to the provided mounting template (if included) for precise drilling locations.
- Securely fasten the unit to the wall using appropriate mounting hardware.
- Ensure the unit is level and stable after mounting.
4.3 Electrical Connection
This unit supports dual voltage 110/240V and 50/60Hz frequency. Ensure the power supply matches the unit's requirements.
- Connect the unit to a dedicated power circuit with appropriate overcurrent protection.
- All wiring must comply with local and national electrical codes.
- Ensure proper grounding of the unit.
Figure 4.1: Dimensions of the Rittal 3179.800 Cooling Unit (22.4" H x 11.8" W x 7.83" D).
5. Operating Instructions
Once installed and powered, the Rittal 3179.800 cooling unit will begin to regulate the temperature within the enclosure.
5.1 Initial Power-Up
- After completing the electrical connections, restore power to the unit.
- The unit will typically initiate a self-test and then begin operation.
5.2 Temperature Control
The Blue e+ S series incorporates advanced cooling technology for optimal temperature control. The unit is designed to maintain a set temperature within the enclosure. Specific temperature adjustment procedures may vary; refer to the unit's display or remote control interface for detailed instructions.
This model features a remote control capability for convenient temperature adjustments and monitoring.
6. Maintenance
Regular maintenance ensures the efficient and reliable operation of your cooling unit. Always disconnect power before performing any maintenance.
- Filter Cleaning/Replacement: Periodically check and clean or replace the air filters to ensure proper airflow and cooling efficiency. The frequency depends on the operating environment.
- Coil Cleaning: Inspect the condenser and evaporator coils for dust and debris. Clean them gently with a soft brush or compressed air if necessary.
- Drainage System: Ensure the condensate drain is clear and free of obstructions to prevent water buildup.
- Visual Inspection: Regularly inspect the unit for any signs of damage, loose connections, or unusual noises.
7. Troubleshooting
This section provides solutions to common issues you might encounter with your cooling unit. For problems not listed here, contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit not cooling | No power; blocked air filters; low refrigerant; unit too small for enclosure. | Check power supply; clean/replace filters; contact qualified technician for refrigerant check; verify unit capacity. |
| Excessive noise | Loose components; fan obstruction; worn bearings. | Check for loose parts and tighten; clear any obstructions from fan; contact qualified technician. |
| Water leakage | Blocked condensate drain; unit not level. | Clear the condensate drain; ensure the unit is level during installation. |
8. Specifications
Detailed technical specifications for the Rittal 3179.800 Blue e+ S Wall-Mounted Cooling Unit:
| Specification | Value |
|---|---|
| Model Number | 3179800 |
| Product Dimensions (D x W x H) | 7.83" x 11.8" x 22.4" (19.89 cm x 29.97 cm x 56.9 cm) |
| Item Weight | 28.7 Pounds (13.02 kg) |
| Cooling Capacity | 1,706.07 BTU/hr (1774 British Thermal Units) |
| Capacity | 0.15 Tons |
| Voltage | 110/240 Volts |
| Frequency | 50/60Hz |
| Noise Level | 66 dB |
| Color | Light Gray, Basalt Gray |
| Special Feature | Remote Controlled |
| BEE Star Rating | Energy Star Certified |
| Seasonal Energy Efficiency Ratio (SEER) | 14.5 |
| Manufacturer | Rittal LLC |
| Date First Available | January 9, 2024 |
9. Warranty and Support
This product is backed by Rittal's commitment to quality and customer satisfaction.
9.1 Return Policy
The Rittal 3179.800 cooling unit is eligible for a 30-day free return policy, offering a refund or replacement. Please refer to the retailer's specific return guidelines for detailed terms and conditions.
9.2 Customer Support
For technical assistance, troubleshooting, or warranty claims, please contact Rittal customer support. You can find contact information on the official Rittal website or through your product vendor.
Additional resources, including a fact sheet, may be available for download from the product's listing page or the manufacturer's website. For example, a Fact Sheet (Provider) (PDF) is available at https://manuals.plus/m/ee7c89404f9390aa9d124dbed31043e847073a35a8536e01784765d6c477ed06.
