Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Polibi 3-in-1 Convertible Sleeper Chair. Please read this manual thoroughly before use to ensure proper function and safety. Keep this manual for future reference.
Important Safety Information
WARNING: Always follow the assembly instructions carefully. Be cautious when using the arm rest to avoid injury. Do not exceed the maximum weight capacity of 440 lbs.
- Ensure all components are securely fastened before use.
- Keep children and pets away during assembly.
- Do not stand on the chair or bed.
- Avoid placing hot items directly on the fabric.
- Regularly inspect the chair for loose parts or damage.
Package Contents
Verify that all parts are present before beginning assembly. If any parts are missing or damaged, contact customer support.
- Sofa Chair Base
- Backrest Cushion
- Seat Cushion
- Pull-out Bed Mechanism
- Arm Pads
- Assembly Hardware Kit
- Instruction Manual
Setup and Assembly
Follow these steps to assemble your Polibi 3-in-1 Convertible Sleeper Chair.
- Unpack all components and lay them out on a clean, soft surface to prevent scratches.
- Attach the armrests to the main chair base using the provided hardware. Ensure they are securely tightened.
- Insert the backrest cushion into its designated slot.
- Place the seat cushion onto the chair base.
- Verify that the pull-out bed mechanism operates smoothly.
Image: Dimensional diagram of the Polibi 3-in-1 Convertible Sleeper Chair. Shows the chair in upright position with dimensions: 33 inches height, 33.5 inches depth, 34 inches width. Seat dimensions are 18 inches height, 24 inches depth, 20 inches width. The diagram also illustrates the chair converted to a bed, showing a total length of 66 inches and a width of 24 inches for the extended section.
Operating Instructions
Converting from Chair to Lounger/Bed
The Polibi 3-in-1 Convertible Sleeper Chair can be easily transformed into a sofa chair, lounger, or single bed.
- Sofa Chair Position: Ensure the pull-out section is fully retracted and the backrest is in the upright position.
- Lounger Position: Gently pull the portable handle located on the front of the seat to extend the footrest section. The bottom pulley device will assist in smooth extension. Adjust the backrest to your desired reclining angle (105° to 145°).
- Single Bed Position: Fully extend the pull-out section until it is flat. Adjust the backrest to a fully flat (180°) position to create a single bed.
Image: The Polibi 3-in-1 Convertible Sleeper Chair displayed in its three primary modes: a standard sofa chair, a recliner with the footrest extended, and a fully flat single bed configuration.
Image: A close-up view of the Polibi Sofa Bed Chair's adjustable backrest, showing three common angles: 105 degrees for coffee/sitting, 145 degrees for reading, and 180 degrees for sleeping.
Image: Detail of the pull-out section of the Polibi Sofa Bed Chair, highlighting the portable handle for easy extension and the smooth pulley device at the bottom for effortless conversion.
Maintenance and Care
Proper care will extend the life of your convertible sleeper chair.
- Cleaning: For general cleaning, vacuum the linen fabric regularly using an upholstery attachment. For spills, blot immediately with a clean, dry cloth. For stubborn stains, use a mild fabric cleaner according to its instructions, testing on an inconspicuous area first.
- Frame Care: The sturdy metal frame requires minimal maintenance. Periodically check all bolts and screws and tighten if necessary.
- Fabric Care: Avoid direct sunlight exposure for prolonged periods to prevent fading.
- Weight Capacity: Do not exceed the maximum weight capacity of 440 lbs.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Difficulty converting chair to bed. | Mechanism obstructed or not fully engaged. | Ensure no objects are blocking the pull-out mechanism. Apply gentle, even force when pulling the handle. Check if the pulley device is clean and free of debris. |
| Chair feels unstable or wobbly. | Loose assembly hardware. | Inspect all bolts and screws. Tighten any loose connections using the appropriate tools. |
| Backrest does not adjust smoothly. | Mechanism stiff or obstructed. | Ensure no fabric or foreign objects are caught in the backrest adjustment mechanism. Apply light lubricant to moving parts if necessary (consult customer support first). |
Specifications
- Brand: Polibi
- Model: B0CLTSMDC8
- Color: White
- Material: Linen (Fabric), Sponge (Fill Material), Metal (Frame)
- Product Dimensions (Chair): 33.5"D x 34"W x 33"H
- Product Dimensions (Bed): Approximately 66"D x 34"W x 24"H
- Weight Capacity: 440 lbs
- Back Style: Slat Back
- Special Feature: Arm Rest, Cushion Availability, Convertible Design
- Age Range (Description): Adult
- Indoor/Outdoor Usage: Indoor
Warranty and Support
For warranty information or customer support, please contact Polibi directly through their official website or the retailer where the product was purchased. Keep your purchase receipt as proof of purchase.
Return Policy: This product typically has a 30-day return/replacement policy from the date of purchase. Refer to your retailer's specific return policy for details.
