LEQISMART Electric Scooter A11 User Manual

1. Important Safety Information

Before operating your LEQISMART Electric Scooter A11, please read this manual thoroughly and understand all safety warnings and instructions. Failure to follow these instructions may result in serious injury or property damage.

• Always wear a helmet: Ensure your helmet meets local safety standards.
• Obey traffic laws: Ride in accordance with all local traffic laws and regulations.
• Check before each ride: Verify brakes, tires, and all components are in good working order.
• Avoid riding in adverse conditions: Do not ride in heavy rain, snow, or on icy surfaces.
• Maintain proper speed: Adjust your speed to suit road conditions and your skill level.
• One rider only: The scooter is designed for a single rider up to 100 kg (220 lbs).
• Be aware of surroundings: Pay attention to pedestrians, vehicles, and obstacles.

2. Product Overview

The LEQISMART Electric Scooter A11 is a foldable, road-approved electric scooter designed for urban commuting and leisure. It combines robust construction with user-friendly features for a comfortable and efficient ride.

The LEQISMART Electric Scooter A11, showcasing its sleek design and compact form factor.

Key Features:

• Powerful Motor: Equipped with a 350W motor for efficient acceleration and climbing.
• Extended Range: Up to 30 km (18.6 miles) on a single charge.
• Top Speed: Reaches a maximum speed of 20 km/h (12.4 mph).
• 10-inch Tires: Provides improved shock absorption and a smoother ride over varied terrain.
• Dual Braking System: Features a front hub brake and an electric rear brake for reliable stopping power.
• Intelligent LED Display: Shows speed, battery level, and riding mode.
• Quick Folding Mechanism: Folds in 3 seconds for easy portability and storage.
• Road Approval (ABE): Certified for legal use on public roads in Germany.

Illustration of the powerful 350W motor, highlighting key performance metrics like 30km range, 20km/h max speed, 10-inch tires, 100kg max load, and 15% climbing ability.

Close-up of the 10-inch vacuum explosion-proof tires, emphasizing their puncture resistance, good shock absorption, and low rolling resistance for a comfortable ride.

Overview of the scooter's safety features, including the dual braking system (hub and electronic brakes), integrated headlight, taillight, and horn for enhanced visibility and control.

Detailed view of the intelligent LED display, indicating its functions such as speedometer, power indicator, and power switch, providing essential ride information at a glance.

3. Setup and Initial Assembly

Your LEQISMART Electric Scooter A11 comes partially assembled. Follow these steps to complete the setup and prepare for your first ride.

3.1 Unboxing

1. Carefully open the packaging and remove the scooter and all accessories.
2. Check the contents against the packing list to ensure all parts are present.
3. Remove all protective packaging materials.

3.2 Handlebar Installation

1. Lift the handlebar stem to an upright position until it clicks into place.
2. Connect the main cable from the handlebar to the cable extending from the stem. Ensure the connectors are aligned correctly and push firmly until they click.
3. Secure the handlebar to the stem using the provided screws and Allen wrench. Tighten firmly to prevent wobbling.

3.3 Initial Charging

Before your first ride, fully charge the scooter's battery.

1. Locate the charging port, usually on the side of the deck.
2. Plug the charger into a standard wall outlet, then connect the charging cable to the scooter's charging port.
3. The indicator light on the charger will typically turn red during charging and green when fully charged.
4. Charging time may vary, but typically takes 4-6 hours for a full charge.

Visual representation of the 36V / 7.8AH battery, highlighting its multiple protection features including overcharge, over-discharge, over-voltage, over-current, short-circuit, and temperature protection.

4. Operating Your Scooter

Familiarize yourself with the controls and riding techniques for a safe and enjoyable experience.

4.1 Power On/Off

• To Power On: Press and hold the power button on the display for a few seconds until the screen illuminates.
• To Power Off: Press and hold the power button again until the display turns off.

4.2 Riding Basics

1. Kick-Start: For safety, the scooter requires a manual kick-start. Push off with your foot to gain a small amount of momentum (approx. 3-5 km/h).
2. Accelerate: Once moving, gently press the throttle lever (usually on the right handlebar) to engage the motor and accelerate.
3. Brake: To slow down or stop, release the throttle and gently squeeze the brake lever(s) on the handlebars. The scooter features a dual braking system for effective stopping.
4. Riding Posture: Stand with both feet on the deck, slightly staggered for balance. Keep your knees slightly bent to absorb shocks.

4.3 Display Functions

The intelligent LED display provides real-time information:

• Speedometer: Displays your current speed.
• Battery Level: Indicates the remaining battery charge.
• Riding Mode: Shows the selected speed mode (e.g., Eco, Standard, Sport). Press the power button briefly to cycle through modes.

4.4 Folding and Unfolding

The scooter's folding mechanism allows for easy transport and storage.

Illustrated guide to folding the LEQISMART A11 scooter in three simple steps: 1. Rotate the safety latch, 2. Fold the stem down, 3. Secure the handlebar to the rear fender.

• To Fold:
  1. Ensure the scooter is powered off.
  2. Locate the folding latch/lever at the base of the handlebar stem.
  3. Follow the instructions on the image to release the latch and fold the stem downwards until it locks into the rear fender.
• To Unfold:
  1. Release the handlebar from the rear fender.
  2. Lift the handlebar stem upwards until it clicks securely into its upright position. Ensure the folding latch is fully engaged.

The folded LEQISMART A11 scooter being easily placed into a car trunk, demonstrating its portability for multi-modal transport.

A person riding the LEQISMART A11 electric scooter on a paved surface, illustrating typical usage.

5. Maintenance and Care

Regular maintenance ensures the longevity and safe operation of your scooter.

5.1 Cleaning

• Wipe the scooter with a damp cloth after each ride to remove dirt and dust.
• Do not use high-pressure water jets or corrosive cleaning agents.
• Ensure the charging port cover is securely closed to prevent water ingress.

5.2 Battery Care

• Charge the battery regularly, even if not in use, to maintain its health.
• Avoid completely draining the battery before recharging.
• Store the scooter in a cool, dry place, away from direct sunlight and extreme temperatures.

5.3 Tire Maintenance

• Regularly check tire pressure and inflate to the recommended PSI (refer to tire sidewall or specifications).
• Inspect tires for wear, punctures, or damage before each ride.

5.4 Brake System Check

• Ensure brake levers operate smoothly and provide adequate stopping power.
• Check brake pads for wear and replace if necessary.

6. Troubleshooting Common Issues

This section addresses common problems you might encounter and their potential solutions.

If you encounter an issue not listed here, or if the suggested solutions do not resolve the problem, please contact LEQISMART customer support for assistance.

7. Technical Specifications

8. Warranty and Customer Support

LEQISMART stands behind the quality of its products. Your LEQISMART Electric Scooter A11 is covered by a manufacturer's warranty against defects in materials and workmanship.

For specific warranty terms, registration, or to make a warranty claim, please refer to the warranty card included with your product or visit the official LEQISMART website.

If you require technical assistance, have questions about operation, or need to order replacement parts, please contact LEQISMART customer support. Have your model number (A11) and purchase information ready when contacting support to ensure prompt service.

Contact Information: Please refer to the contact details provided on the LEQISMART official website or your product packaging for the most up-to-date support channels.