Polibi B0CLRKCMVC

Polibi Modern Convertible Sleeper Sofa Bed

Instruction Manual

Model: B0CLRKCMVC

Introduction

Thank you for choosing the Polibi Modern Convertible Sleeper Sofa Bed. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read all instructions carefully before use and retain this manual for future reference.

Safety Information

  • Ensure all components are present and undamaged before proceeding with setup.
  • Do not allow children to play on or around the sofa bed unsupervised, especially during conversion.
  • Avoid placing heavy objects on the pull-out bed mechanism.
  • Use only the provided power adapter (if applicable) for USB charging ports.
  • Periodically check all connections and fasteners to ensure they remain secure.

Components

Your Polibi Convertible Sleeper Sofa Bed is designed for minimal assembly. Please verify that all parts are included in the packaging. Typical components include:

  • Sofa frame with integrated pull-out bed mechanism
  • Backrest cushions
  • Seat cushions
  • Legs (may be pre-attached or require minor attachment)
  • USB charging module (pre-installed)

If any parts are missing or damaged, please contact customer support.

Setup

This sofa bed requires no complex assembly. Follow these steps for initial setup:

  1. Unpack: Carefully remove all packaging materials from the sofa bed. Ensure no components are accidentally discarded.
  2. Position: Place the sofa in your desired location. Ensure there is adequate space for the pull-out bed to extend fully. The minimum required door width for placement is 55 inches.
  3. Legs (if applicable): If the legs are not pre-attached, securely screw them into the designated points on the bottom of the sofa frame.
  4. Inspect: Visually inspect the sofa for any shipping damage or loose components.
Polibi Convertible Sleeper Sofa in compact sofa configuration
Figure 1: The Polibi Convertible Sleeper Sofa in its compact, upright position.

Operating Instructions

Converting to Sleeper Bed

The sofa easily converts into a sleeper bed:

  1. Clear the Area: Ensure there is sufficient clear space in front of the sofa for the bed to extend.
  2. Pull Out: Grasp the fabric loops or handles located at the front base of the sofa. Gently pull the bed mechanism outwards until it fully extends and locks into place.
  3. Adjust: The extended section forms the sleeping surface.
Polibi Convertible Sleeper Sofa with pull-out bed extended and USB charging detail
Figure 2: The sofa with the pull-out bed fully extended, ready for use as a sleeper.
Polibi Convertible Sleeper Sofa with pull-out bed extended, top-down view
Figure 3: An overhead view of the sofa bed in its extended configuration.

Adjusting the Backrest

The backrest offers three adjustable positions (105°, 140°, 180°) to suit your comfort needs for reading, entertainment, or sleeping. To adjust, gently push the backrest forward until you hear a click, then recline it to your desired angle. Repeat to cycle through positions.

Using USB Charging Ports

The sofa bed features integrated USB and Type-C charging interfaces on the side arm. Connect your electronic devices to these ports for convenient charging while relaxing on the sofa.

Close-up of USB and Type-C charging ports on the sofa arm
Figure 4: Detail of the integrated USB and Type-C charging ports.

Utilizing Arm Pockets

Each armrest includes a storage pocket, ideal for keeping small items such as remote controls, mobile phones, or magazines within easy reach.

Close-up of the storage pocket on the sofa arm
Figure 5: The convenient storage pocket located on the sofa arm.

Maintenance

Cleaning Instructions

For general cleaning, spot clean the velvet upholstery as needed. For more extensive cleaning, professional cleaning is recommended. Refer to the upholstery cleaning code 'W' for water-based cleaning agents.

General Care

  • Avoid direct sunlight exposure to prevent fading of the fabric.
  • Keep the sofa away from heat sources and excessive moisture.
  • Regularly vacuum the upholstery using a soft brush attachment to remove dust and debris.
  • Periodically check and tighten any loose fasteners.

Troubleshooting

If you encounter any issues with your Polibi Convertible Sleeper Sofa Bed, please refer to the following common solutions:

  • Pull-Out Mechanism Sticking: Ensure no obstructions are blocking the mechanism. Apply a silicone-based lubricant to moving parts if necessary.
  • Backrest Not Adjusting: Confirm that the backrest is fully upright before attempting to recline. Ensure no fabric or debris is caught in the adjustment mechanism.
  • USB Ports Not Working: Verify that the sofa is properly connected to a power source. Check the USB cable for damage.
  • Squeaking Noises: Inspect all bolts and screws for tightness. Tighten any loose connections.

If the problem persists, please contact customer support.

Specifications

Dimension diagram of the Polibi Convertible Sleeper Sofa Bed
Figure 6: Detailed dimensions of the Polibi Convertible Sleeper Sofa Bed.
FeatureDetail
BrandPolibi
ModelB0CLRKCMVC
Product Dimensions (D x W x H)47"D x 53"W x 31"H
Reclined Length53 Inches
Seat Depth20 inches
Seat Height15 Inches
Upholstery Fabric TypeVelvet
ColorBlue
Frame ColorCopper
Back StyleAdjustable (3 positions: 105°, 140°, 180°)
Seating Capacity2.00
Special FeaturesPull-Out Sleeper, USB/Type-C Charging, Arm Pockets, Copper Nail Trim
Assembly RequiredNo
Indoor Outdoor UsageIndoor
Product Care InstructionsSpot clean or professionally clean as needed.

Warranty Information

Warranty details for your Polibi Convertible Sleeper Sofa Bed are typically included with your purchase documentation or can be found on the official Polibi website. Please refer to these resources for specific terms and conditions regarding coverage and duration.

Customer Support

For further assistance, troubleshooting, or to inquire about replacement parts, please contact Polibi customer support. You can often find contact information on the manufacturer's website or through the retailer where you purchased the product.

Visit the Polibi Store on Amazon for more information.

Related Documents - B0CLRKCMVC

Preview Polibi MB-826SASS-G 82.6-inch L-Shape Sectional Sofa Assembly Instructions
Step-by-step assembly guide for the Polibi MB-826SASS-G 82.6-inch L-Shape 3-Seater Reversible Sectional Sofa. Includes a detailed parts list and clear instructions for each stage of assembly.
Preview Assembly Instructions for Queen Size Upholstered Wood Platform Bed with Headboard and 2 Drawers
Step-by-step assembly instructions for a gray queen size upholstered wood platform bed with a headboard and two drawers. Includes safety warnings, part lists, hardware lists, and assembly steps.
Preview Polibi Loft Bed Assembly Instructions (WF301849/301850)
Detailed assembly instructions for the Polibi Loft Bed, model numbers WF301849 and WF301850. Includes safety warnings, parts list, hardware list, and step-by-step guidance for building the metal house bunk bed with slide and staircase.
Preview Assembly Instructions for WF197908/WF197909 Bunk Bed
Detailed assembly instructions for the WF197908/WF197909 bunk bed, including part lists, hardware details, and step-by-step guidance. Learn how to assemble your bunk bed safely and correctly.
Preview House Bed Assembly Instructions WF286771
Assembly instructions for the House Bed, SKU Code WF286771. Includes part list, hardware list, and step-by-step assembly guide.
Preview Polibi Bed Warranty Policy - RS519-8972AAK & HARI-232AAM | The Home Depot
This document outlines the 6-month warranty policy for Polibi furniture, including specific models like the RS519-8972AAK Murphy Bed and HARI-232AAM Canopy Platform Bed. It details the process for handling manufacturing defects and lists common exclusions such as accidental damage, unauthorized modifications, and purchases made outside The Home Depot Marketplace.