SENSEA POP Oval WC Toilet Seat - Natural Oak Effect - Instruction Manual

1. Product Overview

The SENSEA POP Oval WC Toilet Seat is designed for universal compatibility with standard toilet bowls, featuring adjustable hinges for easy fitting. Constructed from FSC-certified engineered wood with a natural oak effect finish, this toilet seat combines durability with a modern aesthetic. Its robust design includes metal hinges for exceptional longevity and ease of cleaning.

Image 1: This image shows the SENSEA POP Oval WC Toilet Seat with its lid open, revealing the natural oak effect finish of both the lid and the seat. The metal hinges are visible.

2. Safety Information

• This toilet seat is designed to support a maximum weight of 150 kg (approximately 330 lbs). Do not exceed this weight limit to prevent damage or injury.
• Ensure all mounting hardware is securely tightened during installation to prevent movement or instability.
• Avoid using abrasive cleaners or harsh chemicals, as these can damage the finish and material of the toilet seat.

3. Package Contents

Please verify that all the following components are included in your package:

• 1 x SENSEA POP Oval WC Toilet Seat (Lid and Seat)
• 2 x Hinge Bases (white plastic)
• 2 x Metal Rods (for hinges)
• Assorted Washers and Fasteners

Image 2: The image shows the SENSEA POP Oval WC Toilet Seat alongside its mounting components, including two white plastic hinge bases, two metal rods, and several white washers.

4. Installation Instructions

Follow these steps for proper installation of your SENSEA POP Oval WC Toilet Seat:

1. Prepare the Toilet Bowl: Ensure the toilet bowl is clean and dry. Remove any existing toilet seat and hardware.
2. Assemble Hinges: Insert the metal rods into the hinge bases.
3. Position Hinges: Place the assembled hinges into the mounting holes on the toilet bowl. The adjustable design allows for a hinge distance between 130 mm and 180 mm. Adjust as necessary to align with your toilet's mounting holes.
4. Attach Seat: Align the toilet seat with the hinge posts and gently press down until it clicks into place.
5. Secure Fasteners: From underneath the toilet bowl, secure the fasteners (washers and nuts) onto the hinge posts. Tighten them firmly but do not overtighten to avoid damaging the ceramic.
6. Test Stability: Gently test the seat for stability. If it wobbles, tighten the fasteners further.

Image 3: A technical diagram illustrating the key dimensions of the toilet seat. The total length is 435 mm, width is 368 mm, and the adjustable hinge distance ranges from 130 mm to 180 mm.

Image 4: This image displays two views of the toilet seat: one from the top showing the natural oak effect, and one from the bottom revealing the four white bumpers and the metal hinges.

5. Operation

The SENSEA POP Oval WC Toilet Seat operates like any standard toilet seat. Lift the lid and seat as needed. The robust metal hinges are designed for frequent use, with a tested lifespan of approximately 30,000 openings, equivalent to over 10 years of typical use.

Image 5: An image of the SENSEA POP Oval WC Toilet Seat installed on a white toilet, demonstrating its appearance within a typical bathroom environment.

6. Maintenance and Cleaning

To ensure the longevity and hygiene of your toilet seat, follow these maintenance guidelines:

• Regular Cleaning: Clean the toilet seat regularly with a soft cloth and mild, non-abrasive soap or a dedicated toilet seat cleaner.
• Avoid Harsh Chemicals: Do not use bleach, abrasive powders, or strong chemical cleaners, as these can damage the wood finish and metal hinges.
• Dry Thoroughly: After cleaning, wipe the seat and hinges dry with a clean, soft cloth to prevent water spots and maintain the finish. The stainless steel hinges are designed to be corrosion-free.
• Check Fasteners: Periodically check the tightness of the mounting fasteners to ensure the seat remains secure.

7. Troubleshooting

• Seat is Loose: If the toilet seat feels loose or wobbly, re-tighten the mounting fasteners located underneath the toilet bowl. Ensure they are snug but not overtightened.
• Difficulty Aligning: If the seat does not align correctly with the toilet bowl, check that the adjustable hinges are positioned correctly within the 130-180 mm range.
• Squeaking Hinges: If hinges squeak, apply a small amount of silicone-based lubricant to the hinge pins. Avoid oil-based lubricants that can attract dirt.

8. Specifications

9. Warranty and Support

SENSEA products are manufactured to high-quality standards. For specific warranty information or technical support, please refer to the documentation provided at the point of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.