1. Introduction
This manual provides comprehensive instructions for the safe and correct installation, operation, and maintenance of your NORDRIVE N40001 PRO-Slider Evo Aluminium PS-60 Ski Carrier. Please read all instructions carefully before use to ensure optimal performance and safety.
The NORDRIVE PRO-Slider Evo Aluminium PS-60 is a universal ski carrier designed to transport up to 6 pairs of skis or 4 snowboards. It features an anti-theft key system and a sliding mechanism for convenient loading and unloading.
Figure 1: NORDRIVE PRO-Slider Evo Aluminium PS-60 Ski Carrier (Closed)
This image shows the NORDRIVE PRO-Slider Evo Aluminium PS-60 ski carrier in its closed state, ready for transport. The sleek black design and NORDRIVE branding are visible.
2. Safety Information
Adherence to the following safety guidelines is crucial for preventing accidents and ensuring the longevity of your ski carrier and vehicle.
- Vehicle and Roof Bar Load Capacity: Never exceed the maximum load capacity specified by your vehicle manufacturer or roof bar manufacturer. The total weight of the ski carrier and its contents must be within these limits.
- Secure Fastening: Always ensure that the ski carrier is securely fastened to the roof bars and that all skis or snowboards are properly secured within the carrier before driving.
- Regular Checks: Periodically check all fasteners and mounting points, especially during long journeys or after driving on rough terrain.
- Driving Behavior: Drive cautiously, especially when cornering, braking, or in strong crosswinds. The added weight and height can affect vehicle handling.
- Vehicle Height: Be aware of the increased overall height of your vehicle when the ski carrier is installed, particularly when entering garages, car washes, or low-clearance areas.
- Weight Distribution: Distribute the load evenly across the carrier to maintain vehicle stability.
- Anti-Theft: Always use the anti-theft key to lock the carrier when not actively loading or unloading, and when the vehicle is unattended.
3. Setup and Installation
The NORDRIVE PRO-Slider Evo Aluminium PS-60 ski carrier is designed for easy installation on various roof bar types.
3.1. Unpacking and Component Identification
Carefully unpack all components and verify that all parts are present according to the packing list. Refer to Figure 2 for an overview of the components.
Figure 2: Ski Carrier Components
This image displays all the individual components included with the NORDRIVE PRO-Slider Evo Aluminium PS-60 ski carrier, such as the main carrier units, various mounting brackets, bolts, and keys.
3.2. Mounting Options
The carrier includes fittings for two common roof bar types:
- Steel Roof Bars: Utilizes steel brackets for bars with a maximum dimension of 57x60 mm.
- Aluminum Roof Bars: Utilizes T-profile fittings for aluminum bars with a T-slot channel.
Compatibility Note: The carrier is compatible with NORDRIVE Silenzio, Quadra, Alumia, Helio, Snap, Club, Kuma, Kargo, Kargo Plus, and Yakima roof bars. For Yakima bars, the N99971 adapter is required (sold separately).
3.3. Installation Steps
- Select Fittings: Choose the appropriate mounting hardware based on your roof bar type (steel brackets or T-profile fittings).
- Position Carrier: Place the ski carrier units on your vehicle's roof bars, ensuring they are evenly spaced and aligned.
- Attach to Bars: Securely attach the carrier to the roof bars using the selected fittings. Follow the specific instructions provided with the mounting hardware for tightening bolts and clamps. Ensure all connections are firm and stable.
- Test Stability: After installation, gently shake the carrier to confirm it is securely mounted and does not wobble. Re-tighten any loose fasteners if necessary.
Figure 3: Carrier Mounted on Roof Bars
This image illustrates the NORDRIVE PRO-Slider Evo Aluminium PS-60 ski carriers securely mounted on a vehicle's roof bars, shown in the closed position.
4. Operating Instructions
4.1. Loading Skis or Snowboards
The PRO-Slider Evo features a convenient sliding system for easy loading:
- Unlock: Use the provided key to unlock the carrier.
- Slide Out: Gently pull the carrier outwards from the vehicle's roof. The sliding mechanism will extend, bringing the loading area closer to you.
- Place Equipment: Place your skis or snowboards into the carrier, ensuring they are properly aligned and do not obstruct the closing mechanism. The carrier can accommodate up to 6 pairs of skis or 4 snowboards.
- Slide In: Push the carrier back towards the vehicle until it is fully retracted and securely in place.
- Lock: Lock the carrier with the key to prevent theft and ensure the equipment remains secure during transit.
Figure 4: Loading Skis with Sliding Mechanism
This image demonstrates the NORDRIVE PRO-Slider Evo Aluminium PS-60 ski carrier in its extended, open position with skis loaded, highlighting the ease of access provided by the sliding mechanism.
Figure 5: User Interaction with Sliding Carrier
This image shows a person actively loading skis onto the NORDRIVE PRO-Slider Evo Aluminium PS-60 ski carrier, illustrating the practical application of its sliding feature for convenient access.
4.2. Unloading Skis or Snowboards
To unload, follow the loading steps in reverse: unlock, slide out, remove equipment, slide in, and lock.
5. Maintenance
Regular maintenance ensures the longevity and reliable operation of your ski carrier.
- Cleaning: Clean the carrier regularly with mild soap and water, especially after exposure to road salt or harsh weather conditions. Avoid abrasive cleaners.
- Fastener Check: Periodically inspect all bolts, nuts, and clamps for tightness. Re-tighten as necessary.
- Sliding Mechanism: Keep the sliding rails clean and free of debris. If the mechanism becomes stiff, apply a small amount of silicone-based lubricant to the sliding surfaces.
- Storage: When not in use, store the ski carrier in a dry, protected area to prevent corrosion and damage.
6. Troubleshooting
If you encounter any issues with your NORDRIVE PRO-Slider Evo Aluminium PS-60 ski carrier, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Carrier feels loose on roof bars. | Mounting bolts or clamps are not sufficiently tightened. | Re-tighten all mounting bolts and clamps securely. Ensure correct fittings are used for your roof bar type. |
| Sliding mechanism is stiff or difficult to operate. | Dirt, debris, or lack of lubrication on the sliding rails. | Clean the sliding rails thoroughly. Apply a silicone-based lubricant to the sliding surfaces. |
| Key does not turn or lock/unlock the carrier. | Debris in the lock cylinder, incorrect key, or damaged lock mechanism. | Ensure you are using the correct key. Try cleaning the lock cylinder with a specialized lock lubricant. Do not force the key. If the issue persists, contact customer support. |
If the problem persists after attempting these solutions, please contact NORDRIVE customer support or your retailer for further assistance.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | NORDRIVE |
| Model | PRO-Slider Evo Aluminium PS-60 |
| Model Number | N40001 |
| Capacity | Up to 6 pairs of skis or 4 snowboards |
| Material | Aluminium |
| Anti-Theft | Yes, with key |
| Mounting Type | Steel brackets (max 57x60mm) or T-profile fittings for aluminum bars |
| Compatible Roof Bars | NORDRIVE Silenzio, Quadra, Alumia, Helio, Snap, Club, Kuma, Kargo, Kargo Plus, Yakima (with N99971 adapter) |
| Approximate Carrier Length | 660 mm (internal), 800 mm (total) |
| Approximate Carrier Height | 50 mm (base), 135 mm (total) |
| Package Dimensions | 37.5 x 25 x 25 cm |
| Item Weight | 500 g |
Figure 6: Key Dimensions of the Ski Carrier
This image provides a side view of the NORDRIVE PRO-Slider Evo Aluminium PS-60 ski carrier, clearly indicating its key dimensions including the carrier length (660mm and 800mm) and height (50mm and 135mm).
8. Warranty and Support
For warranty information, please refer to the terms and conditions provided at the time of purchase or contact your retailer. NORDRIVE products are designed for durability and performance, and any manufacturing defects are typically covered under standard warranty policies.
For technical support, spare parts, or further inquiries, please visit the official NORDRIVE website or contact your authorized NORDRIVE dealer. You can also visit the NORDRIVE Store on Amazon for product information.
