1. Product Overview
This manual provides instructions for the K&F Concept Selfie Stick Tripod, Model KF09.128V1. This versatile accessory functions as both a selfie stick and a mini tripod, designed for use with smartphones and mirrorless cameras. It features an extendable design, 360-degree rotation, and a wireless remote control for enhanced photography and videography.

Figure 1: K&F Concept Selfie Stick Tripod in various configurations.
2. Setup and Assembly
2.1 Unpacking
Carefully remove all components from the packaging. Verify that all items listed in the "What's in the Box" section are present.
2.2 Attaching Your Device
The tripod features a 1/4-inch thread for direct attachment of cameras or the included smartphone holder.
- For cameras: Screw your camera directly onto the 1/4-inch screw on the ball head.
- For smartphones: Attach the smartphone holder to the 1/4-inch screw. Ensure your smartphone (4.4" - 7.2") is securely placed within the holder.

Figure 2: Smartphone holder with cold shoe mount and size compatibility.
2.3 Extending the Tripod/Selfie Stick
The device features a five-section extendable shaft. Gently pull the sections to extend the stick to your desired height, up to 34cm (13.4 inches).

Figure 3: Height adjustment mechanism.
2.4 Pairing the Wireless Remote
The included Bluetooth remote allows for convenient remote control of your device's camera shutter.
- Turn on the Bluetooth remote control.
- Wait approximately 5 seconds for the LED light to blink, indicating it's in pairing mode.
- On your smartphone, navigate to Bluetooth settings and locate "AB Shutter3" to connect.

Figure 4: Bluetooth remote pairing steps.
3. Operating Instructions
3.1 Using as a Tripod
To use as a tripod, unfold the three legs at the base. Ensure the legs are fully extended and stable on a flat surface. The widened three-legged fixed structure and anti-slip silicone pads provide stability.

Figure 5: Tripod legs with anti-slip pads.
3.2 Adjusting the Angle
The integrated ball head allows for 360-degree horizontal rotation and 90-degree vertical tilt. Loosen the adjustment knob, position your device, and tighten the knob to secure the angle.

Figure 6: Ball head for angle adjustment.
3.3 Using as a Selfie Stick
With the legs folded, the device functions as a handheld selfie stick. Extend the shaft to your desired length for wider shots.
Video 1: K&F Concept Selfie Stick Desktop Stand demonstration. This video illustrates the product's use as both a selfie stick and a desktop tripod, showcasing its extendable features and stability for various shooting angles.
3.4 Cold Shoe Mount
The smartphone holder includes a cold shoe mount, allowing you to attach external accessories such as fill lights or microphones.

Figure 7: Cold shoe mount for accessories.
4. Care and Maintenance
- Clean the tripod and smartphone holder with a soft, dry cloth.
- Avoid exposing the device to extreme temperatures or moisture.
- Do not use harsh chemicals or abrasive cleaners.
- Store in a cool, dry place when not in use.
5. Troubleshooting
5.1 Device Instability
If your device feels unstable, ensure the tripod legs are fully extended and placed on a flat, stable surface. For extended selfie stick use, hold firmly. The internal shock-absorption rings are designed to minimize wobbling.
5.2 Remote Control Not Connecting
Verify the remote control is powered on and fully charged. Ensure Bluetooth is enabled on your smartphone and that "AB Shutter3" is selected and connected in your device's Bluetooth settings. If issues persist, try re-pairing the remote.
5.3 Phone Not Fitting in Holder
The holder is designed for smartphones between 4.4 and 7.2 inches. Ensure your phone falls within this size range. Do not force larger phones into the holder, as this may cause damage.
6. Product Specifications
| Feature | Value |
|---|---|
| Maximum Height | 34 Centimeters (13.4 inches) |
| Minimum Height | 13 Centimeters (5.1 inches) |
| Weight Limit | 2 Kilograms (4.4 lbs) |
| Item Weight | 97 Grams (3.4 oz) |
| Material | Aluminum |
| Tripod Head Type | Ball Heads |
| Compatible Devices | Smartphones (4.4"-7.2"), Mirrorless Cameras |
| Special Feature | Lightweight, Slip Resistant |
| Model Number | KF09.128V1 |
| Batteries | 1 Lithium Metal battery (for remote) |
7. Warranty and Support
For warranty information or technical support, please refer to the official K&F Concept website or contact their customer service directly. Keep your purchase receipt for warranty claims.