1. Introduction
This manual provides detailed instructions for the installation and care of your HUPEJOS Car Dash Cam Window Sun Shade Stickers. These electrostatic stickers are designed to offer UV protection and reduce glare for V7 and V8 dash cam installations, enhancing visibility and performance.
2. Product Overview
The HUPEJOS Sun Shade Electrostatic Stickers are designed to adhere to your car window without adhesive, utilizing static electricity. They are specifically sized to provide shade and UV protection for dash cam lenses, particularly for V7 and V8 models.
Image 2.1: Two HUPEJOS Car Dash Cam Window Sun Shade Stickers. These black electrostatic stickers feature a dotted pattern and white borders, with blue tabs indicating "Please peel off this mask AFTER application completed."
Package Contents:
- 2 x HUPEJOS Sun Shade Electrostatic Stickers (Model: WYK1023)
3. Installation Guide
Follow these steps for proper installation of your electrostatic sun shade stickers:
- Clean the Window Surface: Thoroughly clean the interior surface of your car window where the dash cam is mounted. Ensure it is free from dust, dirt, and grease. Use a glass cleaner and a lint-free cloth for best results.
- Measure and Position: Hold the sun shade sticker against the window to determine the optimal position. It should cover the area around your dash cam lens to effectively block sun glare and UV rays without obstructing the camera's view.
- Peel Off Protective Film (Side 1): Carefully peel off the first protective film from the back of the electrostatic sticker. This side will adhere to the window.
- Apply to Window: Align the sticker with your desired position on the clean window. Gently press the sticker onto the glass, starting from one edge and smoothing it out to remove any air bubbles. A soft cloth or squeegee can be used to push out bubbles towards the edges.
- Peel Off Protective Film (Side 2): Once the sticker is firmly in place and all air bubbles are removed, peel off the second protective film from the front of the sticker. The blue tabs on the sticker indicate this film.
- Final Adjustment: Ensure the sticker is securely attached and provides adequate shading for your dash cam.
Note: The electrostatic nature allows for repositioning if needed. Simply peel off and reapply to a clean surface.
4. Usage and Benefits
Once installed, the HUPEJOS Sun Shade Electrostatic Stickers provide the following benefits:
- UV Protection: Helps to block harmful UV rays from reaching your dash cam lens and interior.
- Glare Reduction: Minimizes sun glare that can affect dash cam video quality, especially during bright conditions.
- Enhanced Video Clarity: By reducing glare, the stickers contribute to clearer and more consistent video recordings from your dash cam.
- Electrostatic Adhesion: Allows for easy application, removal, and repositioning without leaving sticky residue.
5. Maintenance and Care
To ensure the longevity and effectiveness of your sun shade stickers, follow these maintenance guidelines:
- Cleaning: If the sticker accumulates dust or dirt, gently wipe it with a soft, damp cloth. Avoid abrasive cleaners or materials that could scratch the surface.
- Reapplication: If the sticker loses its static cling, remove it, clean both the sticker and the window surface thoroughly with water and mild soap, rinse, and let dry completely before reapplying.
- Storage: When not in use, store the stickers flat in a clean, dry place to prevent creasing or damage. Keep the protective films if you intend to store them for extended periods.
6. Troubleshooting
- Sticker not adhering properly:
- Ensure the window surface is completely clean and dry.
- Check if both protective films have been removed.
- The sticker itself might be dirty; clean it with water and reapply.
- Air bubbles under the sticker:
- Gently smooth out the bubbles using a soft cloth or squeegee, pushing them towards the edges.
- If many bubbles persist, carefully peel off the sticker and reapply, ensuring a smooth application from one side to the other.
7. Specifications
| Brand | HUPEJOS |
| Model Name | Sun Shade Electrostatic Sticker |
| Item Model Number | WYK1023 |
| Manufacturer Part Number | WYK1023 |
| Color | Black |
| Number of Pieces | 2 |
| Item Weight | 0.317 ounces |
| Package Dimensions | 4.37 x 3.15 x 0.87 inches |
| Automotive Fit Type | Universal Fit (optimized for V7/V8 Dash Cams) |
8. Warranty and Support
For warranty information or technical support regarding your HUPEJOS Car Dash Cam Window Sun Shade Stickers, please refer to the official HUPEJOS website or contact their customer service directly. Contact details are typically found on the product packaging or the brand's official online store.
Visit the official HUPEJOS Store: HUPEJOS Store on Amazon
