QNIGLO Q168 Rechargeable Kids Walkie Talkies Instruction Manual

Introduction

Thank you for choosing QNIGLO Q168 Rechargeable Kids Walkie Talkies. This manual provides essential information for the safe and effective use of your new walkie talkies. Please read it thoroughly before operation and keep it for future reference.

Product Features

• Two-Way Communication: Enables clear voice transmission between units.
• VOX Function: Hands-free voice-activated transmission without pressing the PTT button.
• 22 FRS Channels & 99 Privacy Codes: Offers multiple communication options and enhanced privacy.
• Built-in LED Flashlight: Provides illumination in low-light conditions or emergencies.
• USB-C Rechargeable: Convenient charging without removing batteries.
• Durable Design: Shockproof construction for outdoor adventures.
• Long Range: Up to 200 meters communication range in open areas.
• Key Lock: Prevents accidental channel changes.

Package Contents

The QNIGLO Q168 package typically includes:

• QNIGLO Q168 Walkie Talkies (quantity as purchased, e.g., 4 units)
• USB-C Charging Cable(s)
• Lanyard(s)
• User Manual (this document)

Safety Information

• Do not attempt to disassemble or modify the walkie talkie.
• Keep the device away from water and extreme temperatures.
• Use only the provided USB-C cable for charging.
• Supervise children during use, especially when operating the flashlight.
• Avoid prolonged exposure to direct sunlight.

Setup

1. Initial Charge: Before first use, fully charge the walkie talkies using the provided USB-C cable. The charging port is located on the side or bottom of the unit. A full charge typically takes approximately 2.5 hours.
2. Attach Lanyard: Secure the lanyard to the designated attachment point on the walkie talkie for easy carrying.

Image: QNIGLO Q-168 walkie talkie connected to a USB-C charging cable for charging.

Operating Instructions

1. Power On/Off

• To Power On: Press and hold the MENU/Power button until the screen illuminates.
• To Power Off: Press and hold the MENU/Power button until the screen turns off.

2. Adjust Volume

• Use the + and - buttons to increase or decrease the speaker volume.

3. Channel Selection

1. Press the MENU/Power button once. The channel number on the display will flash.
2. Use the + or - buttons to select your desired channel (1-22).
3. Press the MENU/Power button again to confirm the channel selection.
4. Ensure all walkie talkies intended for communication are set to the same channel and privacy code.

4. Setting Privacy Codes (CTCSS/DCS)

Privacy codes help reduce interference from other users on the same channel. There are 99 available codes.

1. After selecting a channel, press the MENU/Power button twice. The privacy code number will flash.
2. Use the + or - buttons to select your desired privacy code (01-99). Code 00 means no privacy code is set.
3. Press the MENU/Power button again to confirm the privacy code.

5. Transmitting and Receiving

• To Transmit: Press and hold the PTT (Push-To-Talk) button located on the side of the walkie talkie. Speak clearly into the microphone. Release the PTT button when finished speaking.
• To Receive: Ensure the PTT button is not pressed. The walkie talkie will automatically receive transmissions on the selected channel and privacy code.

6. VOX Function (Voice Operated Exchange)

VOX allows for hands-free communication. When activated, the walkie talkie will transmit automatically when it detects your voice.

1. Press the MENU/Power button three times. The VOX icon and sensitivity level will flash.
2. Use the + or - buttons to select the VOX sensitivity level (1-3, with 3 being the most sensitive). Select OFF to disable VOX.
3. Press the MENU/Power button to confirm.

7. LED Flashlight

• Press the Light Bulb button once to turn the LED flashlight on.
• Press the Light Bulb button again to turn the LED flashlight off.

Image: QNIGLO Q-168 walkie talkie with its LED flashlight activated.

8. Key Lock Function

The key lock prevents accidental button presses, maintaining your selected settings.

• To Lock: Press and hold the Lock button until a key icon appears on the display.
• To Unlock: Press and hold the Lock button again until the key icon disappears.

9. Monitor Function (MON)

The monitor function allows you to listen to weak signals on the current channel, overriding any set privacy codes.

• Press and hold the MON button to activate the monitor function.
• Release the MON button to deactivate.

Maintenance

• Clean the walkie talkie with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Store the walkie talkies in a cool, dry place when not in use.
• Ensure the charging port cover is securely closed to maintain water resistance.
• Regularly charge the units to maintain battery health, even if not used frequently.

Troubleshooting

Specifications

• Model: Q168
• Brand: QNIGLO
• Channels: 22 FRS Channels
• Privacy Codes: 99 CTCSS/DCS Codes
• Maximum Talking Range: Up to 200 meters (in open areas)
• Power Source: 1 Lithium Polymer battery (included)
• Charging: USB-C
• Special Features: VOX, LED Flashlight, Key Lock, Shockproof
• Water Resistance: IP65 (Water Resistant)
• Tuner Type: UHF
• Recommended Age: 3+ Years

Official Product Video

Customer Support

For any questions or assistance with your QNIGLO walkie talkies, please contact our customer support team. We are available 24/7 and aim to respond within 24 hours.

Visit the QNIGLO Store on Amazon for more information.