VINABTY Replacement Remote Control Instruction Manual

Introduction

Thank you for choosing the VINABTY Replacement Remote Control. This remote is designed as a direct replacement for your original Logitech Soundbar L32SBT17 105000988 remote. It operates using infrared (IR) technology and requires no programming or setup; simply insert batteries and begin use. Its functions are identical to the original remote, providing a seamless user experience. The remote is constructed from high-quality ABS materials for durability and comfortable handling.

Setup

Battery Installation

This remote control requires one CR2025 coin cell battery (not included). Follow these steps to install the battery:

1. Locate the battery compartment on the back of the remote control.
2. Gently push the 'PUSH' tab and slide the battery cover in the direction indicated by 'OPEN' to open the compartment.
3. Insert one CR2025 battery with the positive (+) side facing upwards, as indicated by the diagram inside the compartment.
4. Slide the battery cover back into place until it clicks securely.

Image: Back of the remote control, illustrating the battery compartment and installation instructions for a CR2025 battery.

After installing the battery, the remote is ready for use. No pairing or programming is required.

Operating Instructions

Point the remote control directly at your Logitech Soundbar L32SBT17 to ensure proper signal transmission. The remote features standard buttons for controlling your soundbar's functions.

Image: Front view of the remote control, showing the layout of buttons including Power, Mute, Volume, Playback controls, Audio In, BT Pair, and Coaxial.

Button Functions:

• Power Button (⏻): Turns the soundbar on or off.
• Mute Button (🔇): Mutes or unmutes the sound.
• VOL+ / VOL-: Increases or decreases the volume level.
• Play/Pause (⏸): Plays or pauses audio playback.
• Previous Track (⏮): Skips to the beginning of the current track or the previous track.
• Next Track (⏭): Skips to the next track.
• AUDIO IN: Selects the Audio In input source.
• BT PAIR: Initiates Bluetooth pairing mode.
• COAXIAL: Selects the Coaxial input source.

Maintenance

Cleaning

To clean the remote control, use a soft, dry cloth. Do not use liquid cleaners, abrasive pads, or chemical solvents, as these may damage the surface or internal components.

Battery Replacement

Replace the CR2025 battery when the remote's performance degrades or it stops responding. Typically, batteries should be replaced annually or as needed based on usage.

Storage

Store the remote control in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, it is recommended to remove the battery to prevent leakage.

Troubleshooting

If your remote control is not functioning as expected, please try the following troubleshooting steps:

• Remote not responding:
  • Ensure the battery is correctly installed with the positive (+) side facing up.
  • Replace the CR2025 battery with a new one.
  • Check for any obstructions between the remote control and the soundbar's IR receiver.
  • Ensure the soundbar is powered on.
• Intermittent response:
  • The battery may be low; replace it.
  • Ensure you are within the effective range and line of sight of the soundbar.

If these steps do not resolve the issue, please refer to the support information below.

Specifications

Warranty and Support

This product is covered by the standard warranty provided by the seller. For any issues, questions, or support needs, please contact the seller directly through your purchase platform. Please have your order number and product model (NCLIUK-L32SBT17) available when contacting support.