Introduction
This manual provides essential information for the proper setup, operation, and maintenance of your iiyama XUB2492HSU-W6 23.8-inch IPS Full HD monitor. Please read these instructions carefully before using the product to ensure optimal performance and longevity.
Key Features
- Display Size: 23.8 Inches
- Panel Type: IPS Technology for accurate and consistent color reproduction with wide viewing angles.
- Resolution: Full HD (1920x1080) for crisp and clear visuals.
- Refresh Rate: 100Hz with AdaptiveSync for smooth image transitions.
- Connectivity: Includes HDMI, DisplayPort, and a 4-port USB 3.2 hub.
- Ergonomics: 150mm height adjustable stand with pivot, tilt, and swivel functions for optimal user comfort.
- Eye Care: Blue light reducer function to minimize eye fatigue.
Package Contents
Verify that all items listed below are included in your product package:
- iiyama XUB2492HSU-W6 23.8-inch IPS Monitor
- Power Cable
- HDMI Cable
- USB Cable
- DisplayPort Cable
- User Manual (this document)
Image: The monitor package includes power, HDMI, USB, and DisplayPort cables.
Setup
1. Assembling the Stand
- Carefully remove the monitor and stand components from the packaging.
- Attach the stand base to the stand column, securing it with the provided screw.
- Align the assembled stand with the mounting holes on the back of the monitor.
- Secure the stand to the monitor until it clicks into place or is fastened with screws, depending on the design.
Image: Front view of the iiyama XUB2492HSU-W6 monitor, showcasing its sleek design and adjustable stand.
2. Connecting the Monitor
- Ensure the monitor and your computer are powered off.
- Connect one end of the appropriate video cable (HDMI or DisplayPort) to the corresponding port on your computer's graphics card.
- Connect the other end of the video cable to the HDMI or DisplayPort input on the monitor.
- For USB hub functionality, connect the upstream USB cable from the monitor to an available USB port on your computer.
- Connect the power cable to the monitor's power input, then plug the other end into a power outlet.
Image: A close-up of the monitor's rear panel, highlighting the DisplayPort, HDMI, and USB input/output ports for connectivity.
Image: Side profile of the monitor, illustrating the conveniently located USB ports for easy access.
Operating the Monitor
1. Power On/Off
Press the power button located on the monitor's control panel to turn the monitor on or off. The power indicator light will illuminate when the monitor is active.
2. On-Screen Display (OSD) Navigation
The monitor features an intuitive On-Screen Display (OSD) menu for adjusting various settings. Use the control buttons, typically located on the side or bottom bezel, to navigate and select options.
Image: Detail of the monitor's control buttons, showing labels for Input selection, adjustment (+/-), Menu access, and Power.
- INPUT: Selects the video input source (HDMI, DisplayPort).
- +: Navigates up or increases values in the OSD menu.
- -: Navigates down or decreases values in the OSD menu.
- MENU: Opens the OSD menu or confirms a selection.
- Power Button: Turns the monitor on or off.
Common OSD settings include brightness, contrast, color temperature, input selection, and advanced display modes.
Maintenance
To maintain the performance and appearance of your monitor, follow these guidelines:
- Cleaning the Screen: Gently wipe the screen with a soft, lint-free cloth. For stubborn marks, use a screen-specific cleaning solution applied to the cloth, not directly to the screen.
- Cleaning the Casing: Use a soft, dry cloth to clean the monitor casing. Avoid abrasive cleaners or solvents.
- Ventilation: Ensure the ventilation openings on the monitor are not blocked to prevent overheating.
- Power Off: Always power off the monitor and unplug it from the power outlet before cleaning or if it will not be used for an extended period.
Troubleshooting
If you encounter issues with your monitor, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No image on screen | Power cable not connected; Incorrect input source; Computer in sleep mode. | Check power connections; Select correct input source via OSD; Wake up computer. |
| Image too dark or too bright | Brightness/Contrast settings incorrect. | Adjust Brightness and Contrast settings in the OSD menu. |
| Colors appear incorrect | Color settings incorrect; Faulty video cable. | Adjust color settings in OSD; Replace video cable. |
| No sound from speakers | Volume too low; Audio cable not connected (if using external source); Incorrect audio output selected on computer. | Increase monitor volume; Ensure audio cable is connected; Select monitor as audio output on computer. |
| USB ports not working | USB upstream cable not connected. | Connect the USB upstream cable from the monitor to your computer. |
Specifications
| Feature | Specification |
|---|---|
| Model Number | XUB2492HSU-W6 |
| Screen Size | 23.8 Inches |
| Panel Type | IPS |
| Max Screen Resolution | 1920 x 1080 Pixels (Full HD) |
| Refresh Rate | 100Hz |
| Aspect Ratio | 16:9 |
| Connectivity | 1x HDMI, 1x DisplayPort, 4x USB 3.0 Ports |
| Item Weight | 10.78 pounds (4.89 kg) |
| Product Dimensions (LxWxH) | 8.25 x 21.24 x 13.5 inches (20.96 x 53.95 x 34.29 cm) |
| Color | Bianco (White) |
| Voltage | 240 Volts |
Warranty and Support
Your iiyama XUB2492HSU-W6 monitor comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official iiyama website for detailed warranty terms and conditions. For technical support, troubleshooting assistance, or service inquiries, please contact iiyama customer support through their official channels.
