1. Introduction
This manual provides essential information for the safe and efficient use of the ANLY APR-3 Phase Detection Relay. The APR-3 is designed for under phase detection, phase failure, and phase sequence monitoring in industrial electrical systems. It is a crucial component for ensuring the safety and optimal performance of your equipment by protecting against common power supply anomalies.
2. Safety Information
WARNING: Electrical shock hazard. Installation and maintenance should only be performed by qualified personnel. Disconnect all power before working on the relay or connected equipment.
- Always follow local electrical codes and regulations.
- Ensure proper grounding of all equipment.
- Do not operate the relay if it is damaged or has been exposed to moisture.
- Verify correct voltage and current ratings before connection.
3. Product Overview
The ANLY APR-3 is a robust and reliable relay designed for general purpose usage in various industrial applications. It features premium materials and excellent finishing, ensuring durability and consistent performance. This relay is specifically engineered to detect under phase conditions, phase failures, and incorrect phase sequences, providing critical protection for sensitive machinery and systems.
Figure 3.1: Front panel of the ANLY APR-3 Phase Reversal Relay. This image displays the front panel of the ANLY APR-3 Phase Reversal Relay. Key information visible includes the brand 'ANLY', product type 'PHASE REVERSAL RELAY', model 'APR-3', electrical rating '5A 250VAC', frequency '50Hz', and a voltage indicator for '380 VAC'.
Key features include:
- Under phase detection
- Phase failure detection
- Phase sequence monitoring
- CE certified for quality assurance
- Designed for general purpose industrial applications
4. Setup and Installation
Proper installation is critical for the reliable operation of the APR-3 relay. Refer to the wiring diagram provided with the product packaging for specific connection details. The following are general steps:
- Mounting: Securely mount the relay in a suitable enclosure, ensuring adequate ventilation and protection from environmental factors.
- Power Connection: Connect the main power supply lines to the designated terminals on the relay. Ensure phase sequence is correct if applicable to your setup.
- Load Connection: Connect the controlled load or control circuit to the relay's output contacts.
- Verification: Double-check all wiring connections for tightness and correctness before applying power.
5. Operating Instructions
Once installed and powered, the ANLY APR-3 relay operates automatically to monitor the phase conditions. The relay will activate its output contacts based on the detected phase status (under phase, phase failure, or incorrect sequence).
- Normal Operation: When all phases are within acceptable parameters and the sequence is correct, the relay's status indicator (if present) will show normal operation, and the output contacts will be in their default state (e.g., closed for normal operation).
- Fault Detection: Upon detection of an under phase, phase failure, or incorrect phase sequence, the relay will trip, changing the state of its output contacts to signal the fault and protect the connected equipment.
- Reset: Depending on the model, the relay may automatically reset once the fault condition is cleared, or it may require a manual reset. Refer to the product's specific datasheet for reset behavior.
6. Maintenance
The ANLY APR-3 relay is designed for low maintenance. However, periodic checks can help ensure its longevity and reliable performance.
- Visual Inspection: Regularly inspect the relay for any signs of physical damage, discoloration, or loose connections.
- Cleaning: Keep the relay and its enclosure clean and free from dust and debris. Use a dry, soft cloth for cleaning. Do not use solvents or abrasive cleaners.
- Connection Checks: Periodically verify that all terminal connections are secure and tight.
- Environmental Conditions: Ensure the operating environment remains within the specified temperature and humidity ranges.
7. Troubleshooting
If the ANLY APR-3 relay is not functioning as expected, consider the following common issues:
- Relay Not Activating:
- Check input power supply voltage and phase sequence.
- Verify all wiring connections are correct and secure.
- Ensure the relay's rating matches the system voltage.
- False Trips:
- Check for unstable power supply or transient voltage fluctuations.
- Ensure proper grounding and shielding to prevent electrical noise interference.
- No Indication Lights:
- Confirm power is supplied to the relay.
- Inspect for internal damage (if safe to do so, or consult a professional).
If problems persist, contact customer support or a qualified electrician.
8. Specifications
| Attribute | Value |
|---|---|
| Model Number | APR-3 |
| Manufacturer | Generic (ANLY) |
| Part Number | GG920365_40004584690 |
| Material | Premium Material |
| Operating Voltage | 380 VAC (as per product label) |
| Contact Rating | 5A 250VAC (as per product label) |
| Frequency | 50Hz (as per product label) |
| Power Source (Internal Logic) | DC (as per product description) |
| Usage | General Purpose |
| Item Package Quantity | 1 |
| ASIN | B0CLHDYY9H |
| Date First Available | 20 October 2023 |
| Certification | CE |
9. Warranty and Support
Your ANLY APR-3 relay comes with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and ensures a full refund or replacement for any quality issues.
For any issues, damaged items, or incorrect products, please contact our customer service team through the platform where you made your purchase. We are committed to providing prompt assistance and the best possible solution to ensure your complete satisfaction.
We offer a wide range of industrial electrical equipment and are dedicated to providing top-tier products and unmatched customer service. Browse our catalog for other solutions to power and control your industrial systems efficiently and reliably.
