1. Introduction
This manual provides essential information for the safe and efficient operation of your AMERLIFE 40-inch Electric Fireplace, Model EFP001. This electric fireplace offers a customizable flame experience with 12 unique flame colors and 5 brightness levels. It includes both a log set and crystal media for varied aesthetic preferences. The unit is ETL certified and features an automatic heat-off safety function to prevent overheating. Control is available via an intuitive touchscreen or the included remote control. It supports two heating modes (750W and 1500W) and can efficiently warm spaces up to 400 sq. ft. The versatile design allows for wall-mounted, recessed, or freestanding installation.
2. Safety Instructions
Read all instructions before installing or using this heater. Failure to follow these instructions may result in electric shock, fire, or personal injury. Keep this manual for future reference.
General Safety
- Do not operate any heater with a damaged cord or plug, or after the heater malfunctions, has been dropped, or damaged in any manner.
- Do not use outdoors. This heater is not intended for use in bathrooms, laundry areas, or similar indoor locations.
- Always unplug the heater when not in use.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
- To disconnect heater, turn controls to OFF, then remove plug from outlet.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
- This heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable vapors or liquids are used or stored.
- Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
- This electric fireplace is ETL certified, ensuring it meets recognized safety standards.
Electrical Safety
- Connect to properly grounded outlets only.
- Avoid using extension cords. If an extension cord is necessary, it must be a minimum 14 AWG and rated no less than 1875 watts.
- The heater is equipped with an automatic heat-off safety feature to prevent overheating. If the heater overheats, it will automatically shut off. Unplug the unit, wait 10 minutes, and plug it back in to reset.
3. Package Contents
Verify that all components are present before beginning installation.
- Electric Fireplace Unit
- Remote Control
- Log Set Media
- Crystal Media
- Mounting Hardware (for wall-mount and freestanding options)
- Engineered Wood (for certain installation types)
- Resin (for certain installation types)
4. Setup and Installation
Your AMERLIFE electric fireplace offers versatile installation options: wall-mounted, recessed, or freestanding. Choose the method that best suits your space and follow the corresponding instructions.
Installation Options Overview
This diagram illustrates the three primary installation methods for your electric fireplace. Ensure you have the necessary tools and follow local building codes for installation.
Wall-Mounted Installation
- Select a suitable wall location, ensuring it is away from drapes, furniture, and high-traffic areas.
- Mark the desired height and width for the mounting bracket on the wall.
- Drill pilot holes and securely attach the mounting bracket to the wall studs using the provided hardware.
- Carefully lift the fireplace unit and hook it onto the wall-mounted bracket. Ensure it is level and secure.
- Connect the power cord to a grounded outlet.
Recessed Installation
The mirrored design of the fireplace is particularly striking when recessed, creating a seamless integration with your interior decor.
- Create a wall opening with dimensions slightly larger than the fireplace unit (refer to specifications for exact cutout dimensions). Ensure there is adequate clearance for ventilation.
- Ensure a grounded electrical outlet is available within the recessed area.
- Carefully slide the fireplace unit into the prepared opening.
- Secure the unit to the wall framing using the appropriate screws.
- Connect the power cord to the outlet.
Freestanding Installation
- Attach the included freestanding base supports to the bottom of the fireplace unit using the provided screws.
- Place the assembled unit on a stable, level surface.
- Ensure the unit is positioned away from flammable materials and has adequate clearance for air circulation.
- Connect the power cord to a grounded outlet.
Video: Installation and Features Overview
This video demonstrates the various installation methods (wall-mounted, recessed, freestanding) and highlights key features such as flame color options, remote control functionality, and heating modes.
5. Operating Instructions
Your electric fireplace can be operated using the touchscreen controls on the unit or the included remote control.
Controls: Touchscreen and Remote
The remote control offers convenient operation from a distance, while the touchscreen provides direct access to all settings on the unit itself.
Power On/Off
- Press the Power button on the remote or touchscreen to turn the unit on or off.
Flame Customization
The fireplace offers a wide range of visual settings to match your preference or mood.
- Flame Color: Press the Flame Control button to cycle through 12 unique flame colors. An automatic flame gradient feature is also available.
- Flame Brightness: Use the Brightness Control button to adjust the flame intensity through 5 levels.
- Media Type: The unit comes with both a log set and crystal media. These can be interchanged to alter the appearance of the flame bed.
Heating Functions
- Heater On/Off: Press the Heater button to activate or deactivate the heating function. The flame effect can be used independently of the heater.
- Heating Modes: Switch between 750W for energy-efficient warmth and 1500W for rapid heating. This fireplace efficiently warms up spaces of up to 400 sq. ft.
- Temperature Control: Use the Temperature Control buttons (up/down arrows) to set your desired room temperature.
Timer Function
- Press the Timer button to set an automatic shut-off time for the heater. The timer can typically be set for durations up to 8 hours.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your electric fireplace.
Cleaning
- Always unplug the unit before cleaning.
- Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or sprays.
- Gently clean the glass panel with a soft cloth and glass cleaner.
- Ensure ventilation openings are free from dust and debris. Use a vacuum cleaner with a soft brush attachment if necessary.
Storage
- If storing the unit for an extended period, ensure it is clean and dry.
- Store in a cool, dry place, preferably in its original packaging to protect it from dust and damage.
7. Troubleshooting
If you experience issues with your electric fireplace, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on. | No power, power cord not plugged in, circuit breaker tripped. | Check power outlet, ensure cord is securely plugged in, reset circuit breaker. |
| No heat output. | Heater function is off, temperature setting is too low, safety cut-off activated. | Activate heater function, increase temperature setting, unplug unit for 10 minutes to reset safety cut-off. |
| Flame effect not working. | Flame effect is off, LED lights are faulty. | Activate flame effect, contact customer support if LED lights are faulty. |
| Remote control not working. | Batteries are dead, remote is out of range, obstruction between remote and unit. | Replace batteries, ensure remote is within operating range, remove any obstructions. |
| Unusual noise from unit. | Fan motor issue, debris in fan. | Unplug unit and inspect for debris. If noise persists, contact customer support. |
8. Specifications
| Feature | Specification |
|---|---|
| Brand | AMERLIFE |
| Model Name | Electric Fireplace Wall Mounted |
| Item Model Number | EFP001 |
| Product Dimensions | 4.21"D x 40"W x 16.93"H |
| Item Weight | 34.2 pounds |
| Material | Stainless Steel |
| Color | White |
| Power Source | Corded Electric |
| Power Consumption | 1500 Watts |
| Heat Output | 82 Degrees Fahrenheit (Max) |
| Heating Coverage | 400 sq. ft. |
| Installation Type | Wall Mount, Recessed, Freestanding |
| Flame Colors | 12 |
| Flame Brightness Levels | 5 |
| Included Components | Fireplace, Remote Control, Log Set, Crystal Media, Mounting Hardware |
| Certifications | ETL Certified |
9. Warranty Information
This AMERLIFE electric fireplace comes with a limited warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your product or contact AMERLIFE customer support.
10. Customer Support
For any questions, assistance, or to report issues with your AMERLIFE electric fireplace, please contact our customer support team. Refer to the product packaging or the AMERLIFE official website for the most current contact information.
