Desert Spring DS00200

Desert Spring Humidifier Universal Replacement Pad DS00200 Instruction Manual

Model: DS00200 | SKU: 064-3125

Introduction

This instruction manual provides detailed guidance for the installation and maintenance of your Desert Spring Universal Humidifier Replacement Pad, Model DS00200. This pad is designed to ensure optimal performance of your compatible humidifier unit by effectively distributing moisture into the air.

Compatible Humidifier Models

The Desert Spring Universal Replacement Pad (DS00200, SKU 064-3125) is compatible with the following Desert Spring humidifier models:

This replacement pad includes a plastic frame. For compatibility with other humidifier models, the plastic frame can be removed.

Package Contents

Each package contains:

Specifications

BrandDS18 (Desert Spring)
Model NumberDS00200
SKU064-3125
Actual Pad Size9 1/2" x 9 1/2" x 1 1/2"
MaterialMulti-layer mesh and aluminum foil (pad), Plastic (frame)
Item Weight640 g (for package of 2)
UPC630504413053

Installation Instructions

Follow these steps to replace your humidifier pad:

  1. Power Off: Ensure your humidifier unit and the associated HVAC system are completely powered off before beginning installation.
  2. Locate Humidifier Pad Access: Identify the access panel or cover for the humidifier pad on your unit. This is typically on the side or top.
  3. Remove Old Pad: Carefully open the access panel. Depending on your model, you may need to unlatch or unscrew retaining clips. Gently slide out the old humidifier pad. Dispose of the old pad responsibly.
  4. Prepare New Pad: Unpack the new Desert Spring Universal Replacement Pad. If your humidifier model does not require the plastic frame, carefully remove it from the new pad. The pad is designed to function with or without the frame.
  5. Insert New Pad: Slide the new humidifier pad into the unit, ensuring it is oriented correctly according to your humidifier's design. The pad should fit snugly without forcing.
  6. Secure Access Panel: Close and secure the access panel or cover, ensuring all latches or screws are properly fastened.
  7. Restore Power: Turn the power back on to your humidifier unit and HVAC system.
  8. Check Operation: Verify that the humidifier is operating correctly and that there are no leaks.
Desert Spring Universal Humidifier Replacement Pad
Image: Desert Spring Universal Humidifier Replacement Pad (DS00200) showing its design and included plastic frame.

Maintenance

Regular maintenance of your humidifier pad is crucial for efficient operation and air quality. The Desert Spring Universal Replacement Pad is designed for durability and to reduce mineral buildup, especially with hard water.

Troubleshooting

If you encounter issues after replacing your humidifier pad, consider the following:

Warranty and Support

For specific warranty information or technical support regarding your Desert Spring Universal Humidifier Replacement Pad, please refer to the documentation provided with your original humidifier unit or contact the manufacturer directly. Keep your purchase receipt for warranty claims.

Related Documents - DS00200

Preview DS-AF15 AutoFlush Timer: Installation and Operation Guide for Desert Spring Humidifiers
Comprehensive guide to installing and operating the Desert Spring DS-AF15 AutoFlush timer for rotary disc humidifiers. Learn setup, programming, and maintenance features.
Preview GeneralAire GF-3200PFT Installation Manual: Evaporative Humidifier Guide
Detailed installation guide for the GeneralAire GF-3200PFT Electronically Controlled Pulsed Flow Humidifier. Covers plenum installation, ductwork, water supply, electronic controller setup, wiring, startup, and maintenance procedures for HVAC professionals.
Preview GeneralAire Warranty Chart: Component Coverage & Handling Instructions
Comprehensive warranty chart detailing coverage periods and handling instructions for GeneralAire humidifiers, air cleaners, purifiers, and dehumidifiers from Canadian General Filters Ltd.
Preview Normcore Spring Loaded Tamper: Inner Spring Replacement and Parts Guide
Detailed instructions for replacing the inner spring of the Normcore Spring Loaded Tamper, along with a comprehensive list of included components and their materials. Features an expanded view of the tamper's construction.
Preview Benidub Spring Amp III User Manual - Dub Spring Reverb Effects Unit
Detailed user manual for the Benidub Spring Amp III, a dub spring reverb effects unit. Learn about its features, controls, connections, and specifications for optimal audio processing.