Lepro LED Headlamp User Manual

Product Overview

The Lepro LED Headlamp is a versatile and powerful lighting solution designed for various activities, from outdoor adventures like camping and hiking to practical tasks such as bike repairs and working in low-light conditions. This rechargeable headlamp features a super bright 230° COB wide beam and an adjustable spotlight, providing comprehensive illumination. Its motion sensor capability allows for hands-free operation, enhancing convenience and safety. Built with durability in mind, it is IP44 waterproof, shockproof, and dustproof, ensuring reliable performance in challenging environments.

Figure 1: Lepro LED Headlamp (2-Pack) with charging cables.

Key Features

• Superior Brightness & Illumination: Features a 230° wide-angle COB light delivering 350 lumens and an adjustable spotlight for focused illumination up to 500 feet.
• Versatile Lighting Modes: Offers 6 lighting modes including COB light (High/Low), Spotlight (High/Low), and Motion Sensor mode for hands-free control.
• USB Rechargeable: Equipped with a 1200mAh built-in battery and a Type-C charging cable, providing 4-10 hours of continuous use on a 4-hour charge.
• Durable & Weatherproof: IP44 waterproof, shockproof, and dustproof design ensures resilience against heavy rain, snow, and harsh conditions.
• Comfortable Design: Lightweight at only 93 grams (3.28 ounces) with an elastic and adjustable headband for comfortable wear during extended periods.

Figure 2: Overview of the 5 lighting modes available on the headlamp.

Setup

1. Initial Charging

Before first use, fully charge your Lepro LED Headlamp. Connect the provided Type-C charging cable to the headlamp's USB port and plug the other end into a compatible USB power source (e.g., wall adapter, power bank, computer USB port). The charging indicator light will show charging status (e.g., red for charging, green for fully charged). A full charge typically takes about 4 hours.

Figure 3: Charging the Lepro LED Headlamp using the Type-C cable.

2. Adjusting the Headband

The headlamp features an elastic and adjustable headband for a comfortable and secure fit. Adjust the strap to ensure the headlamp sits snugly on your head without being too tight. The lightweight design (93 grams) minimizes discomfort during prolonged use.

Operating Instructions

Power Button Functions

The main power button controls the various lighting modes:

• First Press: Activates COB Floodlight High (350 lumens).
• Second Press: Switches to COB Floodlight Low (110 lumens).
• Third Press: Activates Spotlight High (150 lumens).
• Fourth Press: Switches to Spotlight Low (60 lumens).
• Fifth Press: Turns off the headlamp.

Note: The COB floodlight and spotlight cannot be active simultaneously.

Motion Sensor Mode

The headlamp is equipped with a motion sensor for hands-free operation. To activate this feature:

1. Press the dedicated sensor button (usually located near the main power button). A small indicator light will illuminate to confirm motion sensor activation.
2. Once activated, simply wave your hand in front of the headlamp to turn the COB light on or off. This is particularly useful when your hands are occupied or dirty.

Figure 4: Product details highlighting the sensor and power buttons.

Adjusting Spotlight Angle

The spotlight feature allows for flexible adjustment of the beam angle. Manually tilt the spotlight module up or down to direct the light precisely where needed. This adjustable angle provides enhanced flexibility for various tasks and environments.

Figure 5: Adjustable spotlight for enhanced flexibility.

Maintenance

• Cleaning: Wipe the headlamp with a soft, damp cloth to remove dirt and dust. Avoid using harsh chemicals or abrasive cleaners.
• Storage: Store the headlamp in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Recharge the headlamp regularly, even if not in constant use.
• Water Resistance: The headlamp is IP44 waterproof, meaning it is protected against splashing water from any direction. While it can withstand rain and splashes, it is not designed for submersion in water.

Figure 6: The headlamp's IP44 waterproof and dustproof capabilities.

Troubleshooting

Specifications

Warranty and Support

The Lepro LED Headlamp comes with a 1-year limited warranty. For warranty claims, technical support, or any product-related inquiries, please contact Lepro customer service through their official channels or visit the Lepro Store on Amazon.

You can find more information and contact details at the official Lepro Store: Lepro Amazon Store.