1. Introduction
The Durablow SH4002D-002 is a dual-band WiFi (2.4G+5G) and Bluetooth-enabled smart control system designed to enhance your gas fireplace experience. It allows for convenient control of your gas fireplace valve and blower fan through the free Smart-Life APP, eliminating the need for a separate hub or gateway. This system features a built-in timer, a 24/7 programmable thermostat schedule, and compatibility with popular voice assistants like Alexa, Google Home, SmartThings, and Siri for seamless integration into your smart home environment. The blower fan offers multiple speed settings including OFF, High, Medium, Low, and Smart Mode (Auto) to optimize comfort and energy efficiency.
2. What's in the Box
Upon unpacking your Durablow SH4002D-002 system, please verify that all components listed below are present and in good condition:
- Blower Fan
- WiFi Controller Box (with engineering plastic housing)
- USB Power Adapter
- USB Cable for Controller Box
- 2-Way Power Splitter
- 3-Prong Power Cord for Blower
- Thermostat Wire Sensor
- User Manual (this document)
Note: The WiFi controller box housing is made of engineering plastic. Avoid temperatures over 130°F (54°C) to prevent damage.
3. Installation
This section provides detailed instructions for installing your Durablow SH4002D-002 system. Ensure you have a power outlet under or near your fireplace before beginning. Professional installation is recommended if you are unfamiliar with electrical wiring.
3.1. Wiring Overview
The system is designed for compatibility with Millivolt valves, Dexen or SIT electronic IPI control modules, and most 120VAC fireplace blower fans. The wiring involves connecting the blower fan, WiFi controller box, and thermostat sensor to your existing fireplace system.
3.2. Blower Fan Installation
The blower fan is typically installed underneath the fireplace. Ensure proper grounding before use. Connect the blower motor terminals as indicated in the wiring diagram.
Video 1: This video demonstrates the installation process for GFK4 Heatilator Fireplace Blower Kits, which may provide general guidance for blower fan installation. Note that specific wiring for the SH4002D-002 may differ.
Video 2: This video provides an overview of the Wi-Fi Gas Fireplace Controller and Thermostat, including the blower. It offers visual context for the product's components and general setup.
3.3. Connecting the WiFi Controller Box
- Connect the USB power adapter and cable to the WiFi controller box.
- Use the 2-way power splitter and 3-prong power cord to connect the blower to a 120VAC power source.
- Connect the thermostat wire sensor to the designated port on the controller box.
- Connect the ON/OFF signal wires from the controller box to your fireplace's millivolt valve or IPI control module. Refer to your fireplace's manual for specific connection points.
3.4. App Pairing
After physical installation, pair the controller box with your device using the Smart-Life APP. Follow the quick pairing modes outlined in the app or the detailed instructions in the full installation manual provided with the product.
4. Operating Instructions
The Durablow SH4002D-002 offers versatile control options through the Smart-Life APP and voice commands.
4.1. Smart-Life APP Control
The Smart-Life APP provides comprehensive control over your fireplace system:
- On/Off Control: Turn your gas fireplace on or off remotely.
- Thermostat: Set and program a 24/7 thermostat schedule to maintain desired room temperature.
- Timer: Utilize the built-in timer function for automated operation.
- Blower Fan Speed: Adjust the blower fan speed to OFF, High, Medium, Low, or Smart Mode (Auto). Smart Mode automatically adjusts fan speed based on temperature.
- Unit Conversion: Switch between Fahrenheit (°F) and Celsius (°C) for temperature display.
- Sharing Control: Share control of the device with family members for added convenience.
4.2. Voice Control
The system is compatible with Amazon Alexa, Google Home, SmartThings, and Siri. Once paired with your smart home ecosystem, you can use voice commands for basic functions like turning the fireplace on/off or adjusting the temperature.
- Example: "Alexa, turn on the fireplace."
- Example: "Hey Google, set fireplace temperature to 70 degrees."
5. Maintenance
Regular maintenance ensures optimal performance and longevity of your Durablow SH4002D-002 system.
- Cleaning: Periodically clean the blower fan and controller box to prevent dust buildup, which can affect performance and potentially lead to overheating. Use a soft, dry cloth.
- Temperature Limits: The WiFi controller box housing is made of engineering plastic. Avoid exposing it to temperatures exceeding 130°F (54°C). Ensure adequate ventilation around the unit.
- Wiring Inspection: Annually inspect all wiring connections for any signs of wear, damage, or loose connections.
6. Troubleshooting
If you encounter issues with your Durablow SH4002D-002 system, refer to the following common troubleshooting steps:
- Device Not Connecting to WiFi:
- Ensure your WiFi network is 2.4GHz or 5GHz compatible. The device supports dual-band.
- Verify the WiFi password is correct.
- Move the controller closer to your WiFi router to improve signal strength.
- Restart your router and the controller box, then attempt pairing again.
- Fireplace Not Responding to App/Voice Commands:
- Check if the controller box is powered on and connected to WiFi.
- Confirm that the wiring to the gas valve/IPI module is secure and correct.
- Ensure your smart home assistant (Alexa, Google Home) is properly linked to the Smart-Life APP.
- Blower Fan Not Operating:
- Verify the blower fan's 3-prong power cord is securely plugged into a 120VAC outlet.
- Check the blower fan speed setting in the Smart-Life APP.
- Ensure the blower fan is not obstructed and is free to rotate.
- Inaccurate Temperature Readings:
- Ensure the thermostat wire sensor is properly connected and positioned away from direct heat sources or drafts that could skew readings.
If issues persist after attempting these steps, please contact Durablow customer support for further assistance.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | SH4002D-002 |
| Brand | Durablow |
| Connectivity Protocol | Bluetooth, Wi-Fi (2.4G+5G) |
| Control Method | App (Smart-Life), Voice Control, Push Button |
| Compatible Devices | Amazon Alexa, Google Home, SmartThings, Siri, Most 120VAC fireplace blower fans, Millivolt valves, Dexen or SIT electronic IPI control modules |
| Operation Mode | ON-OFF, Timer, Thermostat, Blower Fan Speed Control |
| Item Dimensions (L x W x H) | 12.5 x 3.73 x 3.23 inches |
| Item Weight | 6.05 pounds |
| Material | Engineering Plastic (Controller Housing), Copper (Contact Material) |
| Lower Temperature Rating (Controller Housing) | Avoid temperatures over 130°F (54°C) |
| Insulation (Blower) | Class H (rated to 392°F / 200°C) |
| Certifications | FCC approved |
8. Warranty & Support
Specific warranty details are typically provided with your product documentation. For any questions, technical support, or warranty claims, please refer to the contact information provided in your product packaging or visit the official Durablow website.
This product is designed to replace cross-reference models such as 3301-FSCRF and 3301-A-FSCRF, and is compatible with various fireplace or part brands including American Flame, Avalon, Continental, Dexen, Fenwal, Frymaster, Heatilator, Honeywell, HPC, Heat-N-Glo, Monessen, Montigo, Napoleon, Lennox, Lopi, ProCom, Pitco, RH Peterson / Real Fyre, Robertshaw, SIT, Superior (IHP), Synetek, Tri-Star, Town & Country, White Rodgers, and Xtrordinair.
Note: Gas fireplace kits are not available for locking solenoid gas valve systems.
9. Legal Disclaimer
IMPORTANT SAFETY NOTICE: If your house is UNATTENDED, do NOT use any remote functions, and DO turn OFF the main gas supply. The brand name and model number (if provided) are included solely for cross-reference purposes. All Brands, Trademarks & Model Numbers remain the property of their respective owners.