Introduction
The VECTOR SS16LV 1600 Peak Amp Li-Ion Jump Starter Portable is a compact and powerful device designed for jump-starting vehicles and charging mobile devices. It features integrated reverse polarity protection for safe operation and a built-in work light for convenience in low-light conditions. Its lithium-ion battery can hold a charge for up to 12 months, making it a reliable emergency tool.
Figure 1: The VECTOR SS16LV 1600 Peak Amp Lithium Jump Starter with its heavy-duty powder-coated clamps.
Safety Information
Always read and understand all safety warnings and instructions before using this product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
- Keep out of reach of children.
- Do not expose the jump starter to rain or wet conditions.
- Ensure proper polarity connection to avoid damage to the device or vehicle. The Engine Start Smart Controller provides reverse polarity protection.
- Do not disassemble the unit. Refer all servicing to qualified service personnel.
- Store in a cool, dry place when not in use.
Figure 2: The Reverse Polarity Alarm feature ensures safe connections.
What's in the Box
Verify that all components are present and in good condition:
- VECTOR SS16LV Lithium Jump Starter Unit
- Smart Controller with Powder Coated Metal Clamps (Red and Black)
- AC Charger
- DC Charger
- USB Charging Cable
Figure 3: Included components: Jump Starter, Smart Controller, AC and DC Chargers, and USB Charging Cable.
Product Features
- 1600 Peak Amps: Instantly jump starts cars and trucks up to 8-cylinders.
- USB Charger: Equipped with USB Type-A & Type-C (3.1 Amp) ports for charging mobile devices.
- Rechargeable Lithium Battery: Retains charge for up to 12 months. Comes with AC, DC, and USB adapters for versatile recharging.
- Safe Operation: The Engine Start Smart Controller provides reverse polarity protection, ensuring correct jumper cable connection.
- Portable Design: Compact size (3"D x 1"W x 7"H) and lightweight (12.8 ounces) for easy storage and transport.
- LED Work Light: Built-in LED light assists in dark environments.
Figure 4: Key features of the SS16LV Jump Starter.
Figure 5: Compact dimensions and lightweight design for portability.
Figure 6: Labeled components of the SS16LV unit and accessories.
Figure 7: Side view showing the protected input/output ports.
Setup
Initial Charge
Before first use, fully charge the VECTOR SS16LV jump starter. The unit comes partially charged from the factory.
- Connect the provided AC charger to a standard wall outlet.
- Plug the USB charging cable into the AC charger and then into the USB-C input port on the jump starter.
- The blue LED indicator lights on the jump starter will illuminate and flash to indicate charging. All three lights will be solid blue when fully charged.
- Alternatively, use the DC charger to charge the unit from a vehicle's 12V accessory outlet.
It is recommended to recharge the unit every 3-6 months to maintain optimal battery health, especially if not used regularly.
Operating Instructions
Jump Starting a Vehicle
The VECTOR SS16LV is designed to jump start vehicles with up to 8-cylinder engines.
- Ensure the jump starter is fully charged.
- Connect the Smart Controller's plug into the jump starter's dedicated port (usually covered by a red flap).
- Connect the red (+) clamp to the positive (+) terminal of the vehicle's battery.
- Connect the black (-) clamp to the negative (-) terminal of the vehicle's battery or a solid, unpainted metal part of the vehicle's chassis away from the battery.
- Observe the indicator light on the Smart Controller. A solid green light indicates a correct connection and readiness to start. If a red light or alarm sounds, check connections for reverse polarity.
- Start the vehicle.
- Once the vehicle starts, immediately disconnect the clamps from the vehicle battery, first the black (-) clamp, then the red (+) clamp.
- Disconnect the Smart Controller from the jump starter.
Using as a Power Bank (USB Charging)
The SS16LV can charge various USB-powered devices.
- Open the protective flap covering the USB ports on the jump starter.
- Connect your device's USB charging cable to either the USB Type-A or USB Type-C (3.1 Amp) port on the jump starter.
- Connect the other end of the cable to your mobile device.
- Press the power button on the jump starter to begin charging. The blue LED lights indicate the remaining battery level.
- Disconnect your device once charging is complete.
Figure 8: Charging a mobile device using the USB port.
Using the LED Work Light
The built-in LED work light provides illumination in dark conditions.
- Press the power button once to check the battery level (blue LEDs).
- Press the power button a second time to turn on the LED work light.
- Press the power button a third time to activate the SOS flash mode.
- Press the power button a fourth time to activate the strobe light mode.
- Press the power button a fifth time to turn off the light.
Figure 9: The integrated LED work light provides illumination.
Maintenance
- Cleaning: Wipe the unit with a dry, soft cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the jump starter in a cool, dry place away from direct sunlight and moisture. Ensure it is fully charged before storing for extended periods.
- Battery Care: Recharge the unit every 3-6 months to prolong battery life, even if not used.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Jump starter does not turn on. | Battery is fully discharged. | Charge the jump starter fully using the provided AC or DC charger. |
| Vehicle does not jump start. | Incorrect clamp connection (reverse polarity). Vehicle battery is severely damaged. Jump starter battery is low. | Ensure correct positive (+) and negative (-) connections; the Smart Controller will indicate errors. Check jump starter battery level and recharge if necessary. Consult a professional if vehicle battery is faulty. |
| USB devices not charging. | Jump starter is off. USB cable is faulty. Device is not compatible. | Press the power button to activate USB output. Try a different USB cable. Ensure your device is compatible with USB charging. |
| LED work light not working. | Jump starter is off. Battery is fully discharged. | Press the power button multiple times to cycle through light modes. Charge the jump starter. |
Specifications
- Model: SS16LV
- Brand: VECTOR
- Peak Output Current: 1600 Amps
- Amperage: 1600 Amps
- Product Dimensions: 3"D x 1"W x 7"H
- Item Weight: 12.8 ounces
- Battery Type: Lithium Ion (1 required)
- USB Output: USB Type-A & Type-C (3.1 Amps)
- Manufacturer: Baccus Global LLC
- UPC: 814632015246
Warranty and Support
For warranty information or technical support, please refer to the manufacturer's official website or contact their customer service. Keep your purchase receipt as proof of purchase.
Manufacturer: Baccus Global LLC
For further assistance, visit the VECTOR Store on Amazon.
