Introduction
Thank you for purchasing the Aiwa 2-in-1 Infusion Kettle. This appliance is designed for both boiling water and brewing tea with its removable stainless steel tea infuser. Please read this manual thoroughly before operation to ensure safe and optimal performance. Keep this manual for future reference.
Important Safety Precautions
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:
- Read all instructions.
- Do not touch hot surfaces. Use handles or knobs.
- To protect against fire, electric shock, and injury to persons, do not immerse cord, plugs, or kettle in water or other liquid.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
- Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner.
- The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons.
- Do not use outdoors.
- Do not let cord hang over edge of table or counter, or touch hot surfaces.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to "off", then remove plug from wall outlet.
- Do not use appliance for other than intended use.
- Extreme caution must be used when moving an appliance containing hot water.
- The kettle is for household use only.
- Do not fill above the MAX line (1.7L) to avoid boiling water overflowing.
- Ensure the lid is securely closed before operating.
- Do not open the lid while water is boiling.
- This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
Parts Description
Familiarize yourself with the components of your Aiwa Infusion Kettle:
- Kettle Body: Borosilicate glass with water level markings (MIN, 0.5L, 1.0L, MAX 1.7L).
- Lid: Removable lid with a secure seal.
- Handle: Ergonomic handle for safe pouring.
- Power Switch: On/Off switch with integrated blue LED indicator light.
- Removable Stainless Steel Tea Infuser: For brewing loose leaf tea or tea bags.
- Power Base: 360-degree swivel base with cord storage.
- Drip-Free Spout: Designed for precise pouring.
Image: Exploded view of the Aiwa 2-in-1 Infusion Kettle showing the kettle body, power base, lid, and the removable stainless steel tea infuser.
Setup and First Use
- Unpacking: Carefully remove all packaging materials from the kettle and its components.
- Initial Cleaning: Before first use, fill the kettle with clean water to the MAX line. Boil the water, then discard it. Repeat this process 2-3 times to remove any manufacturing residues.
- Placement: Place the power base on a dry, flat, stable, and heat-resistant surface. Ensure the power cord is not dangling or touching hot surfaces.
- Power Connection: Plug the power cord into a standard electrical outlet.
Image: The Aiwa Infusion Kettle, its power base, and the tea infuser laid out, illustrating the components before assembly and first use.
Operating Instructions
Boiling Water
- Fill Kettle: Open the lid and fill the kettle with the desired amount of fresh, cold water. Do not fill below the MIN line or above the MAX (1.7L) line.
- Close Lid: Securely close the lid.
- Place on Base: Place the kettle firmly onto the power base.
- Activate: Press the power switch down. The blue LED indicator light will illuminate, indicating that the kettle is heating.
- Automatic Shut-off: The kettle will automatically turn off once the water reaches a rolling boil, and the blue LED light will extinguish.
- Pour: Carefully lift the kettle from the base and pour the hot water.
Image: The Aiwa Infusion Kettle filled with water to the 1.7L mark, with the stainless steel infuser and loose tea leaves shown separately, ready for brewing.
Brewing Tea with Infuser
- Prepare Infuser: Open the lid of the kettle. Fill the removable stainless steel tea infuser with your desired amount of loose leaf tea or tea bags. Do not overfill.
- Insert Infuser: Place the filled infuser into the kettle, ensuring it is properly seated.
- Fill Kettle: Fill the kettle with fresh, cold water to the desired level, ensuring it does not exceed the MAX (1.7L) line.
- Close Lid: Securely close the lid.
- Place on Base: Place the kettle firmly onto the power base.
- Activate: Press the power switch down. The blue LED indicator light will illuminate.
- Automatic Shut-off: The kettle will automatically turn off once the water reaches a rolling boil.
- Steeping: Allow the tea to steep for the recommended time according to your tea type.
- Remove Infuser: Carefully remove the lid and then the hot tea infuser using a heat-resistant utensil or oven mitts. Be cautious of steam.
- Pour: Carefully lift the kettle from the base and pour the brewed tea.
Image: The Aiwa Infusion Kettle with tea brewing inside, illuminated by the blue LED light at its base, demonstrating its infusion function.
Note: For optimal tea brewing, some users prefer to boil the water first, then add the infuser with tea leaves after the kettle has turned off, allowing for controlled steeping without boiling the tea leaves directly.
Care and Maintenance
Proper care ensures the longevity and performance of your kettle.
- Always unplug the kettle from the power outlet and allow it to cool completely before cleaning.
- Exterior Cleaning: Wipe the exterior of the kettle and the power base with a soft, damp cloth. Do not use abrasive cleaners or scouring pads.
- Interior Cleaning (Kettle): For general cleaning, rinse the interior with water. For stubborn stains or mineral deposits (limescale), fill the kettle with a mixture of equal parts water and white vinegar. Let it stand for at least 30 minutes, or boil the mixture for 5-10 minutes. Rinse thoroughly several times with fresh water.
- Tea Infuser Cleaning: The stainless steel tea infuser can be rinsed under running water. For thorough cleaning, it can be washed with mild dish soap and a soft brush, then rinsed well.
- Do not immerse the kettle body or power base in water or any other liquid.
- Storage: When not in use, store the kettle in a clean, dry place. You can wrap the power cord around the cord storage area under the power base.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Kettle does not turn on. | Not plugged in; power switch not engaged; no power at outlet. | Ensure kettle is properly plugged into a working outlet. Press the power switch down firmly. Check household circuit breaker. |
| Water is not boiling. | Kettle not properly seated on base; insufficient water. | Ensure kettle is firmly placed on the power base. Check water level is above MIN mark. |
| Kettle boils dry. | Kettle was operated without water or with too little water. | The boil-dry protection feature will automatically shut off the kettle. Unplug, allow to cool, then refill with water. |
| Water overflows during boiling. | Kettle filled above MAX line. | Do not fill the kettle above the MAX (1.7L) line. |
| Mineral deposits (limescale) inside kettle. | Hard water usage. | Descale the kettle using a water and vinegar solution as described in the "Care and Maintenance" section. |
Specifications
- Model: WTK1-1002-BLK
- Capacity: 1.7 Liters (7.5 Cups)
- Material: Borosilicate Glass, Stainless Steel
- Power: 1100 Watts
- Voltage: Standard household voltage (e.g., 120V AC, 60Hz for US market)
- Features: Automatic Shut-Off, Boil-Dry Protection, Cordless, Drip-Less Spout, Blue LED Indicator Light, Removable Tea Infuser, 360-degree Swivel Base.
- Dimensions: 8.26"L x 9.84"W x 7.08"H
- Item Weight: 2.68 pounds
Warranty Information
Aiwa products are manufactured to the highest quality standards. For specific warranty details, including duration and terms, please refer to the warranty card included with your purchase or visit the official Aiwa website. Keep your purchase receipt as proof of purchase for warranty claims.
Customer Support
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Aiwa customer support. Contact information can typically be found on the product packaging, the official Aiwa website, or by scanning the QR code provided on the product packaging for more information.
Product Video Demonstration
Watch this video for a visual guide on the features and operation of the Aiwa 2-in-1 Infusion Kettle.
Video: An official product video demonstrating the features and usage of the Aiwa 2-in-1 Infusion Kettle, including boiling water and tea brewing functions.