Introduction
Thank you for purchasing the Baxton Studio Cherelle 3-Drawer Storage Cabinet. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Safety Information
Your safety and the proper use of this product are important. Please observe the following safety guidelines:
- Read all instructions thoroughly before assembly and use.
- Keep all packaging materials, including plastic bags, away from children and pets to prevent choking hazards.
- Assemble the unit on a soft, clean surface (e.g., carpet or cardboard) to prevent scratching.
- Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
- Do not overtighten screws or fasteners, as this may damage the material.
- This product is intended for indoor use only.
- WARNING: This product can expose you to chemicals including Formaldehyde, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Package Contents
Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Top Panel
- Side Panels (2)
- Bottom Panel
- Back Panel
- Drawer Panels (Front, Back, Sides, Bottom for 3 drawers)
- Drawer Glides (6 pairs)
- Legs (4) and Base Support
- Drawer Knobs (3)
- Assembly Hardware (screws, dowels, cam locks, etc.)
Assembly Instructions
Assembly is required for this product. It is recommended that two adults assemble this cabinet. Please ensure you have adequate space and the necessary tools (e.g., Phillips head screwdriver, hammer) before starting.
- Prepare the Area: Clear a spacious, flat, and clean area for assembly. Lay down a blanket or cardboard to protect the furniture pieces and your floor from scratches.
- Assemble the Main Frame: Attach the side panels to the bottom panel and then to the top panel using the provided hardware (dowels, cam locks, screws). Ensure all connections are secure.
- Install Drawer Glides: Secure the drawer glides to the interior sides of the cabinet frame according to the pre-drilled holes. Ensure they are level and aligned.
- Assemble Drawers: For each of the three drawers, assemble the front, back, and side panels. Slide the drawer bottom into the grooves. Attach the corresponding drawer glides to the sides of each drawer.
- Attach Drawer Knobs: Secure the round drawer knobs to the front of each assembled drawer.
- Insert Drawers: Carefully slide each assembled drawer onto the glides within the cabinet frame. Ensure they slide smoothly.
- Attach Back Panel: Secure the back panel to the rear of the cabinet using the small nails or screws provided.
- Attach Legs and Base: Turn the cabinet over carefully. Attach the black base support and the four rounded legs to the bottom of the cabinet using the designated hardware. Ensure they are firmly tightened.

Figure 1: Overall dimensions of the Cherelle storage cabinet, showing a height of 29.9 inches, width of 30.5 inches, and depth of 15.6 inches. This image is useful for planning placement and understanding the size of the components during assembly.

Figure 2: The Cherelle cabinet with all three drawers pulled open, revealing the internal structure and drawer glides. This view assists in understanding how drawers are installed and how they operate.

Figure 3: A detailed view of the black rounded legs and the connecting base support of the Cherelle cabinet. This image is helpful for correctly attaching the leg assembly to the main cabinet body.

Figure 4: A close-up shot of one of the small, black, round drawer knobs against the light brown drawer front with woven rope embellishment. This image shows the detail of the knob and its attachment point, aiding in correct installation.
Operating the Cabinet
The Cherelle storage cabinet is designed for organizing various household essentials. Each of the three drawers operates independently.
- Opening/Closing Drawers: Gently pull or push the round knobs to open and close the drawers. Avoid forcing the drawers.
- Weight Capacity: Distribute weight evenly within the drawers. Avoid placing excessively heavy items in a single drawer or on the tabletop to prevent tipping or damage. While specific weight limits are not provided, a general guideline is to not exceed 15-20 lbs per drawer and 50 lbs on the tabletop.
- Placement: Place the cabinet on a level surface to ensure stability and proper drawer function.

Figure 5: A full front view of the assembled Baxton Studio Cherelle 3-Drawer Storage Cabinet, showcasing its light brown finish, black legs, and woven rope drawer fronts. This image represents the product in its intended operational state.
Maintenance
Proper care will extend the life and appearance of your storage cabinet.
- Cleaning: Wipe the cabinet surfaces with a dry cloth. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the finish and materials.
- Spills: Immediately wipe up any spills with a clean, dry cloth to prevent staining or water damage.
- Sunlight Exposure: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration of the wood finish.
- Hardware Check: Periodically check all screws and fasteners to ensure they remain tight. Retighten if necessary, but do not overtighten.
Troubleshooting
If you encounter any issues with your Cherelle storage cabinet, refer to the table below for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Cabinet is wobbly or unstable. | Uneven floor; loose hardware; incorrect assembly. | Ensure cabinet is on a level surface. Check and tighten all assembly hardware. Review assembly steps. |
| Drawers do not slide smoothly. | Drawer glides misaligned; debris in glides; drawer overloaded. | Remove drawers and check glide alignment. Clean glides of any dust or debris. Reduce weight in drawers. |
| Drawer knobs are loose. | Knob screw has loosened. | Tighten the screw from the inside of the drawer front. Do not overtighten. |
| Visible gaps between panels. | Hardware not fully tightened; panels not properly aligned during assembly. | Gently push panels together and tighten all cam locks and screws. If severe, partial disassembly and reassembly may be required. |
Specifications
Detailed specifications for the Baxton Studio Cherelle 3-Drawer Storage Cabinet:
| Feature | Detail |
|---|---|
| Product Dimensions | 15.6"D x 30.5"W x 29.9"H |
| Drawer Dimensions | 5.5" H x 27.2" W x 11.3" D (internal) |
| Product Weight | 61.5 Pounds |
| Material | Engineered Wood, Woven Rope |
| Finish | Light Brown, Black |
| Assembly Required | Yes |
| Room Type | Kitchen (suitable for various rooms) |
| UPC | 193271394418 |
Warranty and Support
Baxton Studio stands behind the quality of its products. For specific warranty information, details on returns, or to obtain replacement parts, please visit the official Baxton Studio website or contact their customer support directly.
Online Support: Visit the Baxton Studio Store on Amazon
Please have your model name (Cherelle) and purchase information ready when contacting support.





