Introduction
This manual provides essential instructions for the safe and effective use of your LITEON PA-1300-04 AC Adapter Charger. This power supply is designed to provide reliable power to compatible DELL Latitude 10 ST, ST2, T03G, and T07G tablets. Please read this manual thoroughly before using the product and retain it for future reference.
Safety Information
- Power Source: Use only with appropriate AC power outlets (100-240V AC, 50/60Hz).
- Ventilation: Ensure adequate ventilation around the adapter. Do not cover the adapter or place it in an enclosed space during operation.
- Moisture: Keep the adapter away from water, high humidity, and extreme temperatures. Do not operate with wet hands.
- Damage: Do not use the adapter if the cable or housing is damaged. Contact qualified service personnel for repairs.
- Children: Keep out of reach of children.
- Disassembly: Do not attempt to disassemble or modify the adapter. This will void the warranty and may cause electric shock or fire.
- Compatibility: Use only with specified compatible devices (DELL Latitude 10 ST, ST2, T03G, T07G tablets).
Setup
- Unpack: Carefully remove the AC adapter from its packaging.
- Inspect: Check the adapter and cable for any visible damage. If damage is found, do not use the product.
- Connect to Power Outlet: Plug the AC power cord (if detachable) into the adapter, then plug the adapter's AC plug into a standard wall outlet.
- Connect to Device: Insert the specialized multi-pin connector of the adapter into the charging port of your compatible DELL Latitude tablet. Ensure a firm and secure connection.
Image: The LITEON PA-1300-04 AC Adapter showing the main power brick and the specialized multi-pin connector for DELL Latitude tablets.
Operating Instructions
Once properly connected, the adapter will begin charging your DELL Latitude tablet. The charging status is typically indicated by an LED on your tablet or on the adapter itself (if present). Refer to your tablet's user manual for specific charging indicators.
- Charging: The adapter provides a stable 19V DC output at 1.58A, totaling 30W, suitable for your tablet's power requirements.
- Disconnection: To disconnect, first unplug the connector from your tablet, then unplug the adapter from the wall outlet.
- Storage: When not in use, store the adapter and cable neatly. Avoid tightly coiling the cable to prevent damage.
Image: The LITEON PA-1300-04 AC Adapter with its cable coiled, demonstrating proper storage.
Maintenance
- Cleaning: Disconnect the adapter from all power sources before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or solvents.
- Cable Care: Avoid bending or crimping the cable excessively, especially near the connectors. This can lead to internal wire damage.
- Storage: Store the adapter in a cool, dry place when not in use.
Image: A detailed view of the specialized multi-pin connector, highlighting its design for DELL Latitude tablets.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Tablet not charging. |
|
|
| Adapter feels hot. |
|
|
Specifications
- Model: PA-1300-04 / AD065G2Uz
- Input: 100-240V AC, 50/60Hz (Standard AC input for power adapters)
- Output Voltage: 19V DC
- Output Current: 1.58A
- Power Output: 30W
- Connector Type: Specialized multi-pin connector for DELL Latitude tablets
- Compatible Devices: DELL Latitude 10 ST, DELL Latitude ST2, DELL Latitude T03G, DELL Latitude T07G tablets
- Origin: Mainland China
Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your purchase or contact the vendor directly. Keep your proof of purchase for warranty claims.
