1. Introduction
Thank you for choosing the NEOVSUNY Wall-Light LED Wall Sconce. This product is designed to provide versatile and convenient lighting for various indoor environments. It features adjustable color temperature, brightness levels, RGB color modes, a timer function, and a 360-degree rotatable design for optimal light direction. Please read this manual carefully before use to ensure proper installation and operation.
2. Safety Instructions
- Do not disassemble or modify the product. Unauthorized modifications may cause damage or injury.
- Keep the product away from water and high humidity environments to prevent electric shock or malfunction.
- Use only the provided Type-C charging cable. Do not use damaged cables or chargers.
- Ensure the installation surface is clean, dry, and smooth for secure adhesion of the magnetic base.
- This product contains a rechargeable lithium-polymer battery. Do not expose it to extreme temperatures or direct sunlight.
- Keep out of reach of children.
3. Package Contents
Verify that all components are present in the package:
- 1 x NEOVSUNY Wall-Light LED Wall Sconce
- 1 x Type-C Charging Cable
- 1 x 3M Strong Adhesive Pad
- 1 x 360-Degree Rotatable Magnetic Ball Base
- 3 x Screws (for optional screw installation)
- 1 x User Manual
4. Setup and Installation
4.1 Charging the Device
Before first use, fully charge the wall light. Connect the provided Type-C charging cable to the charging port on the light and to a USB power source (e.g., wall adapter, computer USB port).
- Red Light: Indicates the device is charging.
- Green Light: Indicates the device is fully charged.
A full charge typically takes 3-4 hours. The light can operate for up to 25 hours at low brightness or 7 hours at maximum brightness.
Figure 4.1: Charging the Wall-Light and LED indicators.
4.2 Mounting the Wall Sconce
The wall light offers two installation methods: magnetic adhesive or screw fixation.
Method 1: Magnetic Adhesive Installation (Recommended for non-damaging setup)
- Clean the desired wall surface thoroughly to ensure it is free of dust and grease.
- Peel off the protective film from one side of the 3M strong adhesive pad and attach it firmly to the back of the magnetic ball base.
- Peel off the protective film from the other side of the adhesive pad and press the magnetic ball base firmly onto the cleaned wall surface. Hold for 30 seconds to ensure strong adhesion.
- Once the base is securely attached, the wall light can be magnetically attached to the ball base. The light can be easily removed for charging or portable use.
Method 2: Screw Fixation (For permanent and robust installation)
- Mark the desired installation spot on the wall.
- Drill pilot holes at the marked positions.
- Secure the magnetic ball base to the wall using the provided screws.
- Attach the wall light magnetically to the installed ball base.
Figure 4.2: Magnetic adhesive installation method.
4.3 Remote Control Pairing
Before using the remote control, ensure it is paired with the wall light. Typically, the remote is pre-paired. If not, or if you experience issues:
- Ensure the wall light is charged and turned off.
- Press and hold the power button on the remote control for 3-5 seconds until the light blinks, indicating successful pairing.
5. Operating Instructions
The NEOVSUNY Wall-Light can be controlled via its integrated touch sensor or the provided remote control.
5.1 Power On/Off
- Touch Control: Tap the touch sensor on the light to turn it on or off.
- Remote Control: Press the power button (⏻) on the remote.
5.2 Adjusting Brightness and Color Temperature
The main light offers 3 color temperatures and 5 brightness levels for each temperature.
- Color Temperatures: Switch between 3000K (Warm White), 4000K (Natural White), and 6500K (Cool White) using the dedicated button on the remote or by cycling through modes via touch.
- Brightness Levels: Adjust brightness (20%, 40%, 60%, 80%, 100%) using the brightness adjustment buttons on the remote control.
Figure 5.1: Color temperature and brightness adjustments.
5.3 RGB Color Modes
In addition to the main light, the Wall-Light features 6 static RGB colors and 1 dynamic gradient color mode.
- Use the dedicated RGB color buttons on the remote control to select a specific color or activate the gradient mode.
5.4 Timer Function
The remote control allows you to set a timer for the light to automatically turn off.
- Press the 1H, 2H, or 3H button on the remote to set the light to turn off after 1, 2, or 3 hours, respectively.
Figure 5.2: Timer function and eye protection mode.
5.5 Memory Function
The wall light includes a memory function. If the light is on for more than 30 seconds before being turned off, it will recall the last used brightness and color settings when turned on again.
5.6 360-Degree Rotation
The light head is attached to a magnetic ball base, allowing for a full 360-degree rotation. This enables you to easily adjust the direction of the light to suit your needs, whether for direct illumination or ambient lighting.
Figure 5.3: Overall product view with remote and adjustable light.
6. Maintenance
6.1 Cleaning
To clean the wall light, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or electronic components.
6.2 Battery Care
- Recharge the battery when the light output becomes dim or when the charging indicator shows low battery.
- Avoid completely draining the battery frequently to prolong its lifespan.
- If storing the light for an extended period, charge it to approximately 50% every few months.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Battery is depleted. | Charge the light using the Type-C cable. |
| Remote control not paired or battery low. | Pair the remote control (Section 4.3). Replace remote battery if necessary. | |
| Light flickers or is dim. | Low battery. | Recharge the light. |
| Remote control is unresponsive. | Remote battery is low or depleted. | Replace the remote control battery. Ensure line of sight to the light. |
| Magnetic base does not stick to the wall. | Surface is dirty, uneven, or not suitable for adhesive. | Clean the surface thoroughly. Ensure it is smooth and dry. Consider screw fixation if adhesive fails. |
8. Specifications
| Feature | Specification |
|---|---|
| Brand | NEOVSUNY |
| Model Number | Wall-Light |
| Dimensions (L x W x H) | 9.3 x 7.3 x 5.4 cm |
| Weight | 230 grams |
| Battery Type | 1 Lithium-polymer (included) |
| Battery Capacity | 2500 mAh |
| Charging Time | 3-4 hours (via Type-C) |
| Operating Time | Up to 25 hours (low brightness), 7 hours (max brightness) |
| Power | 5 Watts |
| Voltage | 5 Volts (DC) |
| Light Source Type | LED |
| Color Temperatures | 3000K, 4000K, 6500K |
| Brightness Levels | 5 levels (20%, 40%, 60%, 80%, 100%) |
| Special Features | Dimmable, 360-degree rotation, Touch control, Remote control, Timer function, Memory function, RGB color modes |
| Material | Acrylonitrile Butadiene Styrene (ABS), Plastic |
| Installation Type | Wall Mount (Magnetic or Screw) |
9. Warranty Information
Specific warranty details for this product are not provided in the available information. Please refer to the retailer's return policy or contact the manufacturer directly for warranty inquiries. Keep your purchase receipt as proof of purchase.
10. Support
For further assistance, technical support, or questions not covered in this manual, please contact NEOVSUNY customer service through the platform where you purchased the product or visit the official NEOVSUNY website for contact information.