LIORQUE Projection Alarm Clock User Manual

1. Introduction

Thank you for choosing the LIORQUE Projection Alarm Clock. This manual provides detailed instructions for setting up, operating, and maintaining your new alarm clock. Please read this manual thoroughly before use to ensure proper functionality and to maximize your experience with the product.

2. Product Features

• Time Projection: Projects time onto the ceiling or wall with 90-degree direction adjustment, 180-degree flip, and adjustable brightness (off-dim-strong).
• FM Radio: 87.5-108Mhz FM radio with 15 levels of volume adjustment, 10 savable stations, and an auto-off function (5-90 minutes). Can be set as an alarm ringtone.
• Dual Alarm Clock: Set two independent alarms to suit different schedules.
• Large LED Screen & Brightness Adjustment: Clear digital display with stepless brightness adjustment from 0-100% for optimal viewing comfort.
• Dual USB Charging Port: Conveniently charge two devices simultaneously with 5V1A low charging power.
• Snooze Function: Allows for an extra nap with adjustable snooze time.

3. Setup

3.1 Power Connection

Connect the provided power adapter to the DC IN port on the back of the alarm clock and plug it into a standard wall outlet. The clock will power on automatically.

A built-in CR2032 button battery is included to save time and alarm settings during a power outage, ensuring your settings are retained.

Image: The alarm clock connected to a wall outlet, illustrating the power connection.

3.2 Initial Time Setting

1. Press and hold the TIME SET button (location may vary, typically on top or back) to enter time setting mode.
2. Use the +/- buttons (or similar arrow buttons) to adjust the hour. Press TIME SET again to confirm.
3. Use the +/- buttons to adjust the minute. Press TIME SET again to confirm.
4. The time is now set.

4. Operating Instructions

4.1 Time Projection Function

The projection feature allows you to view the time on your ceiling or wall.

• Adjusting Direction: The projector can be rotated 90 degrees to direct the time display where desired.
• Adjusting Brightness: Short press the PROJECTION button to cycle through brightness levels: Off, Dim, Strong.
• Flipping Projection: Long press the PROJECTION button to reverse the projection 180 degrees, adapting to different viewing orientations.

Image: The alarm clock projecting time onto a wall in a bedroom, demonstrating the projection feature and recommended distance.

4.2 Dual Alarm Settings

You can set two independent alarms (Alarm 1 and Alarm 2).

1. Press the ALARM 1/ON/OFF button to activate Alarm 1. The alarm icon will appear on the display.
2. Press and hold the ALARM 1/ON/OFF button to enter Alarm 1 setting mode.
3. Use the +/- buttons to adjust the alarm hour, then press ALARM 1/ON/OFF to confirm.
4. Use the +/- buttons to adjust the alarm minute, then press ALARM 1/ON/OFF to confirm.
5. Repeat the process for Alarm 2 using the ALARM 2/ON/OFF button.
6. When an alarm sounds, press the SNOOZE button for a temporary pause. Press any other button to cancel the alarm.

Image: A close-up of the alarm clock display, highlighting the dual alarm settings for wake-up and bedtime.

Image: A person sleeping peacefully while the alarm clock displays the snooze function, indicating a 5 to 60 minute adjustable snooze time.

4.3 FM Radio Operation

Enjoy your favorite radio stations with the built-in FM radio.

• Turning On/Off: Press the RADIO ON/OFF button to turn the FM radio on or off.
• Tuning: Use the +/- buttons to manually tune to a frequency. Long press the +/- buttons to auto-scan for the next available station.
• Saving Stations: To save a station, press the MEMORY/FM button. Use +/- to select a preset number (up to 10 stations), then press MEMORY/FM again to confirm.
• Adjusting Volume: Use the VOL +/- buttons to adjust the radio volume (15 levels).
• Sleep Timer: Press the SLEEP TIMER button to set the auto-off function (5-90 minutes), allowing you to fall asleep to the radio.

Image: The alarm clock displaying FM radio frequencies, illustrating the radio function with adjustable volume and savable stations.

4.4 Display Brightness Adjustment

The large LED display brightness can be adjusted to your preference.

• Use the DIMMER or BRIGHTNESS button (or a dedicated slider/dial) to adjust the display brightness from 0% (off) to 100% (maximum). This stepless adjustment is ideal for light-sensitive users.

Image: The alarm clock with a visual representation of the infinite brightness adjustment from 0% to 100%.

4.5 Dual USB Charging Ports

The alarm clock is equipped with two USB ports for charging your mobile devices.

• Simply connect your device's USB charging cable to one of the 5V1A USB ports on the back of the alarm clock.
• You can charge two devices simultaneously.

Image: The alarm clock with two smartphones connected to its USB charging ports, demonstrating the dual charging capability.

5. Maintenance

• Cleaning: Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Battery Replacement: The CR2032 backup battery should be replaced periodically (e.g., every 1-2 years) to ensure settings are retained during power outages. Open the battery compartment on the bottom of the unit, remove the old battery, and insert a new CR2032 battery with the correct polarity.
• Placement: Place the clock on a stable, flat surface away from direct sunlight, heat sources, and excessive moisture.

6. Troubleshooting

7. Specifications

8. Warranty and Support

LIORQUE products are designed for reliability and performance. For any questions, technical support, or warranty claims, please refer to the contact information provided with your purchase or visit the official LIORQUE website. Please retain your proof of purchase for warranty purposes.