Important Safety Information
Please read and understand all instructions before assembling and using this product. Failure to follow these instructions may result in injury or damage.
- Do not exceed the maximum weight capacity of 265 lbs (120 kg) per stool.
- Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
- Keep small parts away from children during assembly.
- Use the product on a flat, stable surface to prevent tipping.
- Avoid standing on the stool or using it as a ladder.
- Do not expose the product to extreme temperatures or direct sunlight for prolonged periods, as this may damage the materials.
Product Overview
The Bed Bath & Beyond Hausfame Metal Counter Height Industrial Swivel Bar Stools are designed for comfort and durability, featuring a vintage-inspired faux leather upholstery and a sturdy metal frame. The 360-degree swivel seat enhances mobility and convenience.
Figure 1: Bed Bath & Beyond Hausfame Counter Height Bar Stools in a kitchen environment.
Figure 2: Ergonomic design of the stool backrest, providing support for the human back structure.
Figure 3: Detail of the high-density sponge padding, offering strong resilience and exceptional support.
Package Contents
Please verify that all components are present before beginning assembly. If any parts are missing or damaged, contact customer support.
- Seat with Backrest (2)
- Leg Frame Assembly (2)
- Circular Footrest (2)
- Assembly Hardware (Bolts, Washers, Allen Wrench)
Setup and Assembly
Follow these steps carefully to assemble your bar stools. It is recommended to assemble on a soft, clean surface to prevent scratching.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Check against the 'Package Contents' list.
- Attach Seat to Frame: Align the pre-drilled holes on the underside of the seat with the mounting points on the top of the leg frame assembly. Secure using the provided bolts and washers. Do not fully tighten yet.
- Install Footrest: Position the circular footrest into the designated slots on the leg frame. Secure with the remaining bolts and washers.
- Tighten All Hardware: Once all components are loosely assembled, gradually tighten all bolts using the provided Allen wrench. Ensure the stool is stable and level before fully tightening.
- Final Check: Gently rock the stool to ensure stability. If it wobbles, loosen the bolts slightly, adjust the stool on a flat surface, and re-tighten.
Figure 4: Product dimensions and maximum weight capacity for assembly reference.
Operating Instructions
These bar stools are designed for comfortable seating at counter height surfaces.
- Seating: Sit centrally on the seat cushion. The padded seat and ergonomic backrest provide comfort for extended periods.
- Swivel Function: The seat features a 360-degree swivel mechanism. To rotate, simply apply gentle pressure with your body in the desired direction. Avoid forcing the swivel mechanism beyond its natural rotation.
- Footrest Use: Utilize the circular footrest for added comfort and support, especially during prolonged sitting.
Maintenance and Care
Proper care will extend the life and appearance of your bar stools.
- Cleaning Faux Leather: For general cleaning, wipe the faux leather upholstery with a soft, damp cloth. For spills, blot immediately with a clean, dry cloth. Use a mild soap solution for stubborn stains, then wipe clean with a damp cloth and dry thoroughly. Avoid abrasive cleaners or solvents.
- Cleaning Metal Frame: Wipe the metal frame with a soft, dry cloth. For smudges or dirt, a slightly damp cloth can be used, followed by immediate drying to prevent rust.
- Hardware Check: Periodically check all bolts and screws to ensure they remain tight. Re-tighten as needed to maintain stability.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause the faux leather to fade or crack. Position the stools away from direct sunlight if possible.
Troubleshooting
If you encounter any issues with your bar stools, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Stool wobbles after assembly. | Uneven tightening of bolts or uneven floor surface. | Loosen all bolts slightly, place the stool on a flat surface, apply even pressure to the seat, and then re-tighten all bolts securely. Ensure the floor is level. |
| Swivel mechanism is stiff or squeaks. | Lack of lubrication or debris in the mechanism. | Apply a small amount of silicone-based lubricant to the swivel mechanism. Ensure no debris is obstructing the movement. |
| Faux leather appears dull or dirty. | Accumulation of dust or grime. | Clean with a soft, damp cloth and mild soap solution as described in the 'Maintenance and Care' section. |
Specifications
Detailed specifications for the Bed Bath & Beyond Hausfame Metal Counter Height Industrial Swivel Bar Stools:
| Attribute | Value |
|---|---|
| Product Dimensions | 20.55"D x 20"W x 32.5"H (Counter Height) |
| Seat Height | 24" (Counter Height) |
| Color | Beige |
| Brand | Bed Bath & Beyond |
| Style | Vintage, Industrial |
| Number of Pieces | 2 |
| Maximum Weight Capacity | 265 lbs (120 kg) |
| UPC | 645195463508 |
| ASIN | B0CL6QSKL6 |
| First Available Date | October 17, 2023 |
Warranty Information
For specific warranty details regarding your Bed Bath & Beyond Hausfame Metal Counter Height Industrial Swivel Bar Stools, please refer to the warranty documentation included with your purchase or contact the retailer directly. Warranty terms typically cover manufacturing defects for a specified period from the date of purchase.
Customer Support
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact the retailer or manufacturer's customer service department.
For Bed Bath & Beyond products, you can typically find support contact information on their official website or through your purchase receipt.
Please have your product model number (Hausfame Metal Counter Height Industrial Swivel Bar Stools) and ASIN (B0CL6QSKL6) ready when contacting support.
