NUU GARDEN 7-Piece Cast Aluminum Outdoor Patio Dining Set

1. Product Overview

This NUU GARDEN 7-piece outdoor patio dining set is constructed from cast aluminum, designed for outdoor use. It includes a rectangular dining table with an umbrella hole and six bistro chairs. The set features a weather-resistant powder-coated finish for durability.

Image 1.1: The NUU GARDEN 7-Piece Outdoor Patio Dining Set, featuring a rectangular table and six chairs, set up on a patio.

Key Features:

• Aluminum Frame: High-quality aluminum with black and gold powder coating protects against rust and ensures durability.
• Sturdy Structure: Solid premium cast aluminum with a weather-resistant powder-coated finish and reinforced legs for stability.
• Spacious Table: 60-inch rectangular table includes a 2.09-inch umbrella hole with a holder for most patio umbrellas.
• Ergonomic Design: Chairs feature an ergonomically designed backrest, seat, and curved armrests for comfort and support.
• Easy Assembly: Designed for straightforward assembly with included hardware packs and adjustable feet for stability.

2. Safety Information

Please read and understand all safety information before assembly and use of this product. Failure to follow these instructions may result in injury or damage to the product.

• Exercise caution during use to prevent tip-over.
• Assemble the product strictly according to the provided instructions.
• Keep the dining set away from excessive water and heat sources to prevent damage.
• Ensure all bolts and fasteners are securely tightened before use and periodically check for tightness.
• Do not stand on the table or chairs.

3. Components List

Before beginning assembly, ensure all parts listed below are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact NUU GARDEN customer support for assistance.

Package Contents:

• 1 x Rectangular Dining Table Top
• 2 x Table Legs (or leg assemblies)
• 1 x Table Support Frame
• 6 x Bistro Chairs (backrest, seat, armrests, legs)
• 1 x Hardware Pack (bolts, washers, nuts, Allen wrench)
• Rubber End Caps for table and chair feet

Image 3.1: Detailed view of the table's structure, highlighting key components such as the tabletop, legs, and adjustable feet.

4. Assembly Instructions

Assembly is required for this dining set. It is recommended to have two people for assembly. Please follow these steps carefully.

Tools Required:

• Included Allen Wrench

Table Assembly:

1. Carefully unbox all components and lay them out on a soft, clean surface to prevent scratches.
2. Attach the table legs to the table support frame using the provided bolts and washers. Do not fully tighten yet.
3. Align the assembled leg and frame structure with the underside of the table top. Secure with bolts and washers.
4. Once all bolts are in place, gradually tighten them evenly until secure. Do not overtighten.
5. Insert the rubber end caps into the bottom of each table leg.
6. Adjust the adjustable feet on the table legs to ensure the table is level and stable on your desired surface.

Image 4.1: Detail of the adjustable foot, allowing for leveling on uneven surfaces.

Chair Assembly:

1. For each chair, attach the backrest to the seat frame using the appropriate hardware.
2. Connect the armrests to both the backrest and seat frame.
3. Attach the chair legs to the seat frame.
4. Ensure all connections are aligned before tightening bolts. Gradually tighten all bolts evenly until secure.
5. Insert the rubber end caps into the bottom of each chair leg.
6. Adjust the adjustable knobs on the chair legs to ensure stability.

Image 4.2: A single chair with its dimensions, illustrating the assembled structure.

5. Operating Instructions

General Use:

This dining set is designed for outdoor use. Ensure the table and chairs are placed on a stable, level surface. The cast aluminum construction provides a sturdy and comfortable dining experience.

Umbrella Hole Usage:

The rectangular dining table features a central umbrella hole with a diameter of 2.09 inches. To install a patio umbrella:

1. Remove the cap from the umbrella hole in the center of the table.
2. Insert the pole of a compatible patio umbrella through the hole.
3. Secure the umbrella pole using the integrated holder or a separate umbrella base (not included) for added stability, especially in windy conditions.
4. Ensure the umbrella is properly secured before opening.

Image 5.1: The umbrella hole with its removable cap, designed to accommodate most standard patio umbrellas.

6. Maintenance

Proper care and maintenance will extend the life and appearance of your NUU GARDEN dining set.

Cleaning:

• Wipe the surfaces with a damp cloth to remove dust and dirt.
• For more stubborn stains, use a mild soap solution and a soft brush, then rinse thoroughly with water.
• Avoid using harsh chemicals, abrasive cleaners, or scouring pads, as these can damage the finish.

Protection:

• While the set is weather-resistant, covering it during prolonged periods of harsh weather (heavy rain, snow, intense sun) or when not in use can help preserve its condition.
• Store the furniture in a dry, protected area during off-seasons if possible.

7. Troubleshooting

If you encounter any issues with your dining set, refer to the following common solutions:

Wobbling Table/Chairs:

• Check that all assembly bolts are securely tightened.
• Adjust the leveling feet on the bottom of the table and chair legs to compensate for uneven surfaces.

Rust or Corrosion:

• The cast aluminum frame is designed to be rust-resistant. If minor surface corrosion appears, clean the affected area with a mild abrasive and apply a touch-up paint suitable for outdoor metal furniture.
• Ensure the furniture is not exposed to standing water for extended periods.

Difficulty with Assembly:

• Review the assembly instructions carefully, ensuring all parts are oriented correctly.
• Do not fully tighten any bolts until all components are loosely assembled. This allows for easier alignment.
• If a part seems difficult to fit, double-check that you are using the correct hardware for that step.

8. Specifications

Image 8.1: Dimensional drawing of the table and chair, providing exact measurements.

9. Warranty & Support

For specific warranty information regarding your NUU GARDEN 7-Piece Cast Aluminum Outdoor Patio Dining Set, please refer to the documentation included with your purchase or contact NUU GARDEN customer service directly.

Customer Support:

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact NUU GARDEN customer support through their official channels or visit their Amazon store page for contact information:

Visit the NUU GARDEN Store on Amazon