BLASTKING POD1062BT 10-Channel Powered Mixer User Manual

Introduction

This manual provides detailed instructions for the safe and efficient operation of your BLASTKING POD1062BT 10-Channel Powered Mixer. This powerful audio device integrates a mixer, dual internal amplifiers, a digital signal processor (DSP) with 99 effects, Bluetooth connectivity, and an MP3/USB/SD player, making it ideal for live sound, studio recording, and various audio applications. Please read this manual thoroughly before operating the unit to ensure proper usage and to prevent damage.

Safety Information

Always observe the following safety precautions to reduce the risk of electric shock, fire, or injury:

• Power Supply: Connect the unit only to the specified power supply voltage (switchable between 115V and 230V AC). Ensure the power cord is not damaged or pinched.
• Ventilation: Do not block ventilation openings. Ensure adequate airflow around the unit to prevent overheating.
• Moisture: Do not expose the unit to rain or moisture. Do not place objects filled with liquids on the unit.
• Grounding: Ensure the unit is properly grounded.
• Servicing: Do not attempt to service this unit yourself. Refer all servicing to qualified service personnel.
• Placement: Place the unit on a stable, level surface. Avoid placing it near heat sources or in direct sunlight.

Key Features

The BLASTKING POD1062BT is equipped with a comprehensive set of features designed for versatile audio control:

• Dual internal amplifiers, each providing 250W of output power.
• 9 balanced MIC inputs and 6 Hi-Z inputs for various audio sources.
• 2 wireless MIC inputs on Channels 1 and 2.
• MP3/Line input on Channel 10.
• 8-band graphic EQ for both MAIN and MONITOR outputs.
• Each input channel features a 3-band EQ for precise tone shaping.
• Built-in DSP with 99 selectable effects.
• Pad control on channels 1-6 for managing high-level input signals.
• Global 48V phantom power for condenser microphones.
• Integrated Bluetooth and MP3/USB/SD Player for versatile audio playback.
• Power switchable between 115V and 230V AC for international use.

Product Overview

Familiarize yourself with the various components and controls of your POD1062BT mixer.

Figure 1: Front and rear view of the BLASTKING POD1062BT 10-Channel Powered Mixer, showing all input channels, EQ sections, DSP display, and connectivity ports. A remote control is also visible to the left of the unit.

Front Panel Controls:

• Channels 1-10: Each channel features input jacks (XLR/TRS combo for 1-9, Line/MP3 for 10), Gain/Level controls, 3-band EQ (High, Mid, Low), Effect Send, Monitor Send, and Pan controls. Channels 1-6 also include a PAD switch.
• DSP Effects Section: Digital display showing effect number (99 effects), Program selector knob, and Effect Level control.
• Graphic Equalizers: Two 8-band graphic EQs for precise frequency adjustments of the Main and Monitor outputs.
• Master Section: Main Level controls, Monitor Level control, Phantom Power switch (+48V), and various output indicators.
• MP3/Bluetooth Player: Dedicated section with display, USB port, SD card slot, and control buttons for playback, mode selection, and Bluetooth pairing.

Rear Panel Connections:

• Speaker Outputs: Connect passive speakers to these outputs. Each output provides 250W.
• Power Input: AC power inlet with voltage selector switch (115V/230V).
• Footswitch Input: For remote control of effects.

Setup

Follow these steps to set up your BLASTKING POD1062BT mixer:

1. Unpacking: Carefully remove the mixer from its packaging. Retain the packaging for future transport or storage.
2. Placement: Place the mixer on a stable, flat surface, ensuring adequate ventilation around the unit.
3. Power Voltage Selection: Before connecting the power cord, verify the voltage selector switch on the rear panel matches your local power supply (115V or 230V).
4. Speaker Connection: Connect your passive speakers to the speaker outputs on the rear panel. Ensure correct polarity.
5. Input Connections:
   • Connect microphones to the XLR or TRS inputs of channels 1-9. If using condenser microphones, activate the +48V phantom power switch.
   • Connect instruments (guitars, keyboards) to the Hi-Z inputs.
   • For external audio devices (CD players, laptops), use the Line/MP3 input on Channel 10.
6. Power On: Once all connections are secure, connect the power cord to a suitable AC outlet and turn on the mixer using the power switch.

Operating Instructions

Channel Operation:

1. Gain/Level Control: Adjust the Gain knob for each channel to achieve an optimal input level without clipping (the PEAK LED should only flash occasionally).
2. PAD Switch (Channels 1-6): Engage the PAD switch for high-output sources to prevent input overload.
3. 3-Band EQ: Use the HIGH, MID, and LOW knobs to shape the tone of each input signal.
4. Effect Send: Adjust the EFFECT knob to send a portion of the channel's signal to the internal DSP effects processor.
5. Monitor Send: Adjust the MON knob to send a portion of the channel's signal to the monitor output.
6. Pan Control: Position the signal within the stereo field (left to right).

DSP Effects:

• The DSP section offers 99 built-in effects. Rotate the PROGRAM knob to select an effect number displayed on the digital screen.
• Adjust the EFFECT LEVEL knob in the master section to control the overall wet/dry mix of the effects.

Graphic Equalizers:

• Use the sliders on the 8-band graphic EQs to fine-tune the frequency response of your MAIN and MONITOR outputs. This helps in shaping the overall sound and reducing feedback.

MP3/USB/SD/Bluetooth Player:

• USB/SD Playback: Insert a USB drive or SD card with MP3 files into the respective slot. The player will automatically detect and begin playback. Use the control buttons (Play/Pause, Next, Previous, Mode) to navigate.
• Bluetooth Pairing: Select Bluetooth mode using the MODE button. On your device, search for "BLASTKING POD1062BT" and pair. Once connected, you can stream audio wirelessly to the mixer.

Master Output Control:

• Adjust the MAIN LEVEL controls to set the overall volume of the main speaker outputs.
• Adjust the MONITOR LEVEL control to set the volume for your monitor speakers.

Maintenance

Proper maintenance ensures the longevity and optimal performance of your mixer:

• Cleaning: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
• Ventilation: Regularly check that the ventilation openings are clear of dust and debris.
• Storage: If storing the unit for an extended period, keep it in a cool, dry place, preferably in its original packaging.
• Cable Management: Ensure all cables are neatly organized and not under strain to prevent damage to connectors and ports.

Troubleshooting

If you encounter issues with your mixer, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact Blastking customer support for assistance.

Specifications