CHI Steam Iron User Manual

Introduction

Thank you for purchasing the CHI Steam Iron. This manual provides essential information for the safe and efficient operation, maintenance, and care of your new appliance. Please read all instructions carefully before use and retain this manual for future reference.

Important Safety Instructions

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:

• Read all instructions before using the iron.
• Use iron only for its intended use.
• To avoid the risk of electric shock, do not immerse the iron in water or other liquids.
• Always turn the iron OFF before plugging or unplugging from the electrical outlet. Never yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect.
• Do not allow cord to touch hot surfaces. Let iron cool completely before putting away. Loop cord loosely around iron when storing.
• Always disconnect iron from electrical outlet when filling with water or emptying and when not in use.
• Do not operate iron with a damaged cord or if the iron has been dropped or damaged. To avoid the risk of electric shock, do not disassemble the iron; take it to a qualified serviceman for examination and repair. Incorrect reassembly can cause a risk of electric shock when the iron is used.
• Close supervision is necessary for any appliance being used by or near children. Do not leave iron unattended while connected or on an ironing board.
• Burns can occur from touching hot metal parts, hot water, or steam. Use caution when you turn a steam iron upside down – there may be hot water in the reservoir.
• This appliance is for household use only.

Parts Identification

Familiarize yourself with the components of your CHI Steam Iron:

• Lava Ceramic Soleplate: Provides extreme durability and smooth glide.
• Water Fill Opening: For adding water to the reservoir.
• Spray Nozzle: For misting fabric.
• Steam Button: Activates steam.
• Temperature Control Dial: Selects fabric type and temperature.
• Retractable Cord Button: For cord retraction.
• Handle: Ergonomic grip for comfortable use.
• Water Tank: Transparent tank for water.

Image: Overview of the CHI Steam Iron, highlighting its sleek design and retractable cord feature.

Image: Close-up of the Lava Ceramic Soleplate, showing its texture and numerous steam holes, with an inset illustrating the lava ceramic material.

Setup and First Use

1. Unpacking: Carefully remove the iron from its packaging. Remove any protective films or stickers.
2. Filling the Water Tank:
   • Ensure the iron is unplugged and cool.
   • Open the water fill opening.
   • Fill the water tank with distilled or demineralized water up to the MAX fill line. Do not overfill.
   • Close the water fill opening securely.
3. Power Connection: Extend the retractable cord by gently pulling it out. Plug the iron into a standard electrical outlet.
4. Initial Heating: For first use, allow the iron to heat up on a high setting for a few minutes to burn off any manufacturing residues. You may notice a slight odor or smoke, which is normal.

Operating Instructions

Temperature Control and Fabric Selection

The CHI Steam Iron features an electronic temperature control with a fabric guide, eliminating guesswork.

1. Identify the fabric composition of the garment you wish to iron.
2. Turn the Temperature Control Dial to the appropriate fabric setting (e.g., Linen, Cotton, Wool, Silk, Synthetic). The iron will automatically adjust to the correct temperature.
3. Wait for the indicator light to turn off, signaling that the iron has reached the selected temperature.

Image: Close-up of the electronic temperature control dial with fabric settings (Linen, Cotton, Wool, Silk, Synthetic, Off), showing the intuitive interface for selecting the correct heat level.

Steam Ironing

For effective wrinkle removal, use the powerful steam function.

• Ensure the water tank is filled.
• Set the temperature control to a steam-appropriate setting (usually Cotton or Linen for maximum steam). Steam will not be generated at lower temperatures to prevent water dripping.
• Once the iron reaches the desired temperature, press the Steam Button to release a burst of steam. For continuous steam, ensure the steam setting is engaged.
• Glide the iron over the fabric. The 400+ steam holes ensure even steam distribution.

Image: The CHI Steam Iron emitting a powerful burst of steam from its soleplate, demonstrating its wrinkle-removing capability.

Dry Ironing

For delicate fabrics or when steam is not desired, the iron can be used dry.

• Ensure the water tank is empty or the steam function is turned off.
• Set the temperature control to the desired fabric setting.
• Iron the garment without pressing the steam button.

Retractable Cord

The 8-foot retractable cord offers convenient storage.

• To retract the cord, ensure the iron is unplugged and cool.
• Press and hold the Retractable Cord Button. The cord will automatically retract into the iron body. Guide the cord gently to prevent tangling.

Image: The CHI Steam Iron stored neatly on a shelf with its retractable cord fully retracted, demonstrating its compact storage capability.

3-Way Auto Shutoff

For safety, the iron is equipped with a 3-way auto shutoff feature:

• If left motionless on its soleplate, the iron will shut off after 30 seconds.
• If left motionless on its side, the iron will shut off after 30 seconds.
• If left motionless on its heel rest, the iron will shut off after 8 minutes.
• To reset the iron after auto shutoff, simply move it.

Maintenance and Care

Cleaning the Soleplate

To maintain the smooth glide of the Lava Ceramic Soleplate:

• Ensure the iron is unplugged and completely cool.
• Wipe the soleplate with a damp cloth and a non-abrasive liquid cleaner.
• Do not use abrasive scouring pads or metal cleaners, as these can scratch the soleplate.

Self-Clean Function

Regularly use the self-clean function to remove mineral buildup and maintain optimal steam performance.

1. Fill the water tank to the MAX line with tap water.
2. Plug in the iron and set the temperature to MAX.
3. Once the iron reaches temperature, unplug it.
4. Hold the iron horizontally over a sink.
5. Press and hold the Self-Clean Button (if available, otherwise refer to the dial for "self clean" marking). Hot water and steam will flush out mineral deposits from the steam holes.
6. Gently rock the iron back and forth until the water tank is empty.
7. Plug the iron back in and heat it to dry the soleplate. Unplug and store once cool.

Storage

Always store the iron upright on its heel rest, with the cord retracted, once it has completely cooled down and the water tank is empty.

Troubleshooting

Specifications

• Model: 13113
• Power: 1700 Watts
• Soleplate: Lava Infused Ceramic
• Cord Length: 8 ft. Retractable
• Special Features: 3-Way Auto Shutoff, Electronic Temperature Control with Fabric Guide, Over 400 Steam Holes
• Dimensions: Approximately 12.5"L x 5"W (as per product image)

Image: Diagram showing the approximate dimensions of the CHI Steam Iron: 12.5 inches in length and 5 inches in width.

Warranty and Support

This CHI Steam Iron is backed by a 3-Year Limited Warranty. This warranty covers defects in material and workmanship under normal household use from the date of original purchase.

Image: Graphic indicating "3 Year Extended Protection with 3 Year Limited Warranty" for the product.

For warranty claims, technical support, or replacement parts, please contact CHI customer service. Refer to the official CHI website or product packaging for the most current contact information.

Online Support: Visit the official CHI Store on Amazon for product information and support resources.