Introduction
Thank you for purchasing the Goldair High Power Floor Standing Fan, Model GIPF-26A. This manual provides important information regarding the safe operation, assembly, maintenance, and troubleshooting of your new fan. Please read these instructions thoroughly before use and retain them for future reference.
Important Safety Instructions
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury.
- Ensure the fan is placed on a stable, level surface to prevent tipping.
- Do not insert fingers or any objects through the grille when the fan is operating.
- Keep children and pets away from the fan during operation.
- Unplug the fan from the power outlet before cleaning, moving, or performing any maintenance.
- Do not use the fan in wet or damp locations, such as bathrooms or laundry areas.
- Do not operate the fan with a damaged cord or plug. If the cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
- Ensure the voltage indicated on the fan's rating label matches your local power supply.
- Avoid placing the fan near curtains, drapes, or other objects that could be drawn into the fan blades.
Package Contents
Please check the box for the following items:
- Fan Head Assembly (Motor, Blades, Grilles)
- Adjustable Stand Pole
- Base/Pedestal
- Mounting Hardware (Screws, Washers, Nuts)
- Instruction Manual
Setup and Assembly
Follow these steps to assemble your Goldair Floor Standing Fan:
- Attach the Base: Place the stand pole onto the base. Secure it using the provided screws and washers from underneath the base. Ensure it is firmly tightened.
- Mount the Fan Head: Carefully attach the fan head assembly to the top of the stand pole. Align the mounting holes and secure with the designated screw and knob.
- Adjust Height (Optional): Loosen the height adjustment knob on the stand pole, extend or retract the pole to your desired height, and then firmly tighten the knob.
- Positioning: Place the assembled fan on a firm, level surface, ensuring there is adequate space around it for proper airflow.
Figure 1: Fully assembled Goldair High Power Floor Standing Fan, showing the fan head, adjustable stand, and stable cross-shaped base. This image illustrates the fan's overall structure after assembly.
Operating Instructions
To operate your Goldair fan, follow these steps:
- Power Connection: Plug the power cord into a standard 230V AC electrical outlet.
- Power On/Off: Locate the control buttons on the fan head. Press the 'ON' button to start the fan. Press 'OFF' to turn it off.
- Adjusting Speed: Use the speed control buttons (typically marked 1, 2, 3 or Low, Medium, High) to select your desired airflow intensity. The fan features variable speed settings.
- Adjusting Tilt: The fan head can be tilted up or down to direct airflow. Loosen the tilt adjustment knob on the side of the fan head, adjust to the desired angle, and then firmly tighten the knob.
Maintenance
Regular cleaning and maintenance will ensure optimal performance and extend the life of your fan.
- Cleaning: Always unplug the fan before cleaning. Use a soft, damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or solvents.
- Grille Cleaning: Periodically, the front and rear grilles may accumulate dust. You can carefully remove the front grille (refer to assembly instructions in reverse) to clean the blades with a soft cloth. Ensure all parts are dry before reassembling and operating.
- Storage: When not in use for extended periods, store the fan in a cool, dry place, preferably in its original packaging to protect it from dust.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on. | No power supply. Power cord not properly plugged in. | Check if the power outlet is working. Ensure the power cord is securely plugged into the outlet. |
| Weak airflow. | Fan speed set too low. Grilles or blades are dirty. | Increase the fan speed setting. Unplug the fan and clean the grilles and blades. |
| Unusual noise during operation. | Loose parts. Obstruction in the blades. | Unplug the fan and check for any loose components or obstructions. Tighten any loose screws. |
Specifications
- Brand: Goldair
- Model Number: GIPF-26A
- Colour: Black
- Electric Fan Design: Floor Fan
- Product Dimensions: 72D x 19W x 96H centimetres
- Material: Metal
- Wattage: 200 watts
- Voltage: 230 Volts
- Number of Blades: 3
- Item Weight: 16.9 kg
- Controller Type: Button Control
- Mounting Type: Floor Mount
- Tilt Adjustable Head: Yes
- Variable Speed Setting: Yes
- Quiet Operation: Yes
Warranty and Support
Goldair products are manufactured to the highest quality standards. For warranty information, please refer to the warranty card included with your purchase or visit the official Goldair website. For technical support or service inquiries, please contact Goldair customer service through their official channels.
Website: www.goldair.co.za (Example link, actual link may vary)
