Introduction
This manual provides instructions for the safe and efficient use of your MI 10W Wall Charger with Micro USB Cable (Model: MDY-09-EJ). Please read this manual thoroughly before using the product and retain it for future reference.
Package Contents
- 1 x MI 10W Wall Charger Adapter
- 1 x USB to Micro USB Cable
Image: The MI 10W Wall Charger adapter and the included Micro USB cable. The charger supports up to 2A fast charging and features a sturdy design.
Safety Information
- Do not expose the charger to water or excessive moisture.
- Do not disassemble or attempt to repair the charger.
- Avoid extreme temperatures.
- Keep out of reach of children.
- Ensure the power outlet voltage matches the charger's specifications.
- Unplug the charger during lightning storms or when unused for long periods.
Setup
- Connect the USB Cable: Insert the standard USB-A end of the provided Micro USB cable into the USB port on the MI wall charger adapter.
- Connect to Device: Insert the Micro USB end of the cable into the charging port of your compatible device (e.g., mobile phone, headphones, TWS, game console, power bank).
- Plug into Power Outlet: Plug the MI wall charger adapter into a standard electrical wall outlet.
Image: A side view of the MI wall charger with the Micro USB cable securely connected, ready for use.
Operating Instructions
Once connected as described in the "Setup" section, your device will begin charging automatically. The charger provides 10W (5V/2A) output for efficient charging.
- Fast Charging: This charger supports fast charging for compatible devices, delivering up to 2 Amps of current.
- Data Transfer: The included USB to Micro USB cable also supports data transfer speeds of up to 480 Mbps when connected to a computer.
- Protection Features: The charger is equipped with 380V surge protection and over-heat protection to ensure safe operation.
Image: The MI wall charger highlighting its safety features, including 380V surge protection, compact design, and over-heat protection.
Maintenance
- Cleaning: Disconnect the charger from the power outlet and your device before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or aerosols.
- Storage: Store the charger and cable in a cool, dry place when not in use. Avoid wrapping the cable too tightly to prevent damage.
- Inspection: Periodically inspect the charger and cable for any signs of damage, such as frayed wires or cracked casing. Discontinue use if damage is found.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not charging. |
|
|
| Slow charging. |
|
|
Specifications
| Model Number | MDY-09-EJ |
| Input | 100-240V ~ 50/60Hz |
| Output | 5V / 2A (10W) |
| Connector Type | USB-A (Adapter), Micro USB (Cable) |
| Cable Length | 120 cm (approx.) |
| Data Transfer Speed | Up to 480 Mbps |
| Safety Features | 380V Surge Protection, Over-Heat Protection, BIS Certified |
| Compatible Devices | Mobile phones, headphones, TWS, game consoles, power banks with Micro USB port |
| Weight | 200 Grams (approx.) |
Image: The MI wall charger and its 120cm long Micro USB cable, illustrating its 10W fast charging capability and round design.
Warranty and Support
For warranty information and customer support, please refer to the official MI website or contact your local MI service center. Keep your purchase receipt for warranty claims.