1. Introduction
Thank you for choosing the PAGANI DESIGN 1777 Automatic Mechanical Watch. This manual provides essential information for the proper setup, operation, and maintenance of your timepiece. Please read it carefully to ensure optimal performance and longevity of your watch.
Package Contents:
- PAGANI DESIGN 1777 Watch
- Original Box
- User Manual (this document)
- Cleaning Cloth
- Strap Adjustment Tool
Image 1.1: The PAGANI DESIGN 1777 watch, showcasing its skeleton dial and stainless steel bracelet.
2. Product Overview
The PAGANI DESIGN 1777 is a multifunction automatic mechanical watch featuring a distinctive skeleton dial, allowing visibility of the intricate HZ2196G movement. It is equipped with a rainbow bezel, luminous hands and markers, and a durable stainless steel construction.
Image 2.1: A close-up view of the watch dial, highlighting the skeletonized design and sub-dials.
3. Setup
3.1 Initial Winding
As an automatic mechanical watch, the 1777 is powered by the motion of your wrist. However, for the first use or after a period of inactivity, manual winding is required to initiate power reserve.
- Ensure the crown is in position 1 (fully pushed in).
- Rotate the crown clockwise 20-25 times. This will build up sufficient power reserve for the watch to start running.
3.2 Setting Time and Date
The watch features a crown with multiple positions for setting the time and date functions.
- Position 1 (Pushed In): Normal operating position. Manual winding (clockwise rotation) is possible in this position.
- Position 2 (Pulled Out One Click): Rotate the crown to adjust the date and day of the week. Avoid setting the date between 9 PM and 3 AM to prevent damage to the movement.
- Position 3 (Pulled Out Two Clicks): Rotate the crown to set the time. Once the time is set, push the crown back to Position 1.
Image 3.1: Side view of the watch, illustrating the crown and its positions for setting.
3.3 Strap Adjustment
The stainless steel strap can be adjusted to fit your wrist using the included strap adjustment tool. If you are unfamiliar with this process, it is recommended to seek assistance from a professional watchmaker to avoid damaging the bracelet.
Image 3.2: The watch worn on a wrist, demonstrating its fit and appearance.
4. Operating the Watch
4.1 Automatic Movement
Your PAGANI DESIGN 1777 watch is equipped with an automatic mechanical movement. This means it is powered by the natural motion of your arm. When worn regularly, the watch will self-wind and maintain its power reserve. If the watch is not worn for an extended period, it may stop and require manual winding as described in Section 3.1.
4.2 Multifunction Dials
The watch features sub-dials that display additional information:
- Day Indicator: Displays the current day of the week.
- Date Indicator: Displays the current date.
- 24-Hour Indicator: Provides a 24-hour display, useful for distinguishing AM/PM.
4.3 Luminous Features
The hands and hour markers are coated with an environmentally friendly luminescent material. This material absorbs light and emits a glow in dark conditions, allowing for clear time readability.
5. Maintenance
5.1 Water Resistance
The watch has a water resistance rating of 100 meters (10 ATM), suitable for daily use such as hand washing and accidental splashes. However, it is important to observe the following precautions:
- Do not press any buttons or operate the crown underwater.
- Ensure the crown is fully tightened before any exposure to water.
- Avoid using the watch in extremely hot or cold temperatures, such as showers, saunas, or hot tubs, as temperature fluctuations can compromise seals.
- Do not wear this watch while diving or engaging in high-impact water sports.
- Excessive exposure to water can shorten the life of the watch.
5.2 Cleaning and Care
To maintain the appearance of your watch:
- Regularly clean the watch case and strap with the provided soft cleaning cloth.
- For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying.
- Avoid contact with harsh chemicals, solvents, or detergents, as these can damage the watch's finish and seals.
Image 5.1: The back of the watch, displaying the transparent case back and the safety folding clasp.
6. Specifications
| Feature | Detail |
|---|---|
| Movement | HZ2196G Automatic Mechanical |
| Case Material | 316L Stainless Steel |
| Strap Material | 316L Stainless Steel |
| Dial Window Material | Synthetic Sapphire (9H hardness) |
| Case Diameter | 40 mm |
| Dial Thickness | 13 mm |
| Strap Width | 20 mm |
| Strap Length | 220 mm |
| Weight | 145.5 grams |
| Water Resistance | 100M (10 ATM) |
| Clasp Type | Safety Folding Clasp |
| Features | Skeleton Dial, Rainbow Bezel, Luminous Hands/Markers, Day, Date, 24-Hour Sub-dials |
7. Troubleshooting
If you encounter any issues with your watch, please refer to the following common troubleshooting steps:
- Watch Not Running: If the watch has stopped, it may have run out of power reserve. Manually wind the watch 20-25 times (Section 3.1) and wear it for several hours to allow the automatic movement to build up power.
- Inaccurate Time: Ensure the watch is fully wound. If inaccuracy persists, it may require adjustment by a professional watchmaker.
- Date/Day Not Changing: Check if the time is set correctly (AM/PM). Avoid setting the date between 9 PM and 3 AM. If the issue persists, consult a professional.
For issues not covered here, or if problems persist, please contact customer support.
8. Warranty and Support
Your PAGANI DESIGN 1777 Automatic Mechanical Watch is covered by a one-year warranty against manufacturing defects. Additionally, we offer a 30-day money-back guarantee for quality-related issues from the date of purchase.
For warranty claims, technical support, or any questions regarding your watch, please contact our customer service team. Customer satisfaction is our priority.
