SelfieShow P01Pro/D07

SelfieShow Auto Face Tracking Tripod with 2 Selfie Ring Light User Manual

Model: P01Pro/D07

Introduction

Thank you for choosing the SelfieShow Auto Face Tracking Tripod with 2 Selfie Ring Lights. This device is designed to enhance your video recording, live streaming, and photography experience by providing intelligent face and body tracking, adjustable lighting, and versatile phone positioning. Please read this manual carefully to ensure proper use and optimal performance.

Safety Information

  • Do not expose the device to water or excessive moisture.
  • Avoid extreme temperatures. Store in a cool, dry place.
  • Keep out of reach of children.
  • Use only the provided charging cable or a certified equivalent.
  • Do not attempt to disassemble or repair the device yourself. Contact support if issues arise.

Package Contents

Verify that all items are present in your package:

  • 1 x Face Tracking Tripod
  • 2 x Fill Lights
  • 1 x User Manual (this document)
  • 1 x Remote Control
  • 1 x 2032 Coin Cell Battery (for remote)
  • 1 x USB Charging Cable
SelfieShow Auto Face Tracking Tripod with 2 Selfie Ring Lights and remote control
The SelfieShow Auto Face Tracking Tripod with its two detachable selfie ring lights and remote control.

Product Overview

The SelfieShow Auto Face Tracking Tripod features an intelligent AI tracking system, 360-degree rotation, and two detachable selfie ring lights. It is designed for hands-free video recording and photography.

Diagram showing the SelfieShow tracking holder with features like two cold shoe interfaces, face tracking, remote control, horizontal & vertical modes, no app required, and gesture control.
Key features of the SelfieShow Intelligent Tracking Holder.

Setup

1. Charging the Device

The smart tracking phone holder has a built-in 1200mAh rechargeable battery. Connect the provided USB charging cable to the device's charging port and a power source. The red charging indicator will be on during charging and will turn off when fully charged. A full charge provides up to 5 hours of use.

2. Attaching the Fill Lights

The two selfie ring lights can be attached to the cold shoe ports on either side of the phone holder. Ensure they are securely fastened.

3. Inserting Your Phone

Extend the phone clip to accommodate your smartphone. The clip supports phones between 1.5 to 4 inches wide. Carefully place your phone into the clip, ensuring it is centered and secure.

Image showing a woman using the phone holder with dimensions for phone clip width and a cold shoe port for accessories.
The phone clip extends to fit most smartphones, and the cold shoe port allows for additional accessories like microphones (not included).

4. Attaching to an External Tripod (Optional)

The base of the tracking tripod features a standard 1/4" screw interface. This allows you to detach the base and mount the tracking holder onto other tripods for increased height or different shooting angles.

Diagram illustrating how to attach the tracking tripod to a larger tripod using the standard 1/4 inch interface.
The 1/4" screw interface allows for mounting on other tripods.

5. Remote Control Pairing

The included remote control connects to your mobile phone via Bluetooth. Turn on Bluetooth on your phone and search for "SelfieShow" to pair. Once paired, you can use the remote to start or stop shooting.

Operating Instructions

1. Powering On/Off

Press and hold the power button on the tracking tripod for a few seconds to turn it on or off.

2. Face and Body Tracking

The device uses an AI computing system to automatically recognize and track your face or body. No app download is required, making it compatible with all video applications.

A woman dancing while the auto face tracking phone holder rotates 360 degrees to follow her movement.
The device tracks your movement with 360-degree rotation.

3. Gesture Control

The smart tracking phone holder supports intelligent gesture recognition:

  • OK Gesture: Make an 'OK' sign with your hand to start tracking.
  • Open Palm Gesture: Show an open palm to pause tracking.

The effective distance for gesture recognition is within 1.5 meters.

A woman demonstrating the 'OK' gesture to start tracking and the open palm gesture to pause tracking.
Use hand gestures to control tracking start and pause.

4. Adjusting Ring Lights

Each selfie ring light has 3 light modes (White Light, Natural Light, Warm Light) and multiple brightness levels. Press the button on each ring light to cycle through modes and adjust brightness to suit your environment.

A woman demonstrating the three light modes: white light, natural light, and warm light, provided by the dual fill lights.
Choose from three light modes to achieve optimal lighting.

5. Angle Adjustment and Orientation

The phone holder can be flipped 180 degrees. You can also choose between horizontal or vertical camera modes. The recognition angle can be adjusted to accommodate various postures (standing/sitting).

A woman applying makeup, with the phone holder showing options for standing adjustment and sitting recognition, and multi-angle rotations.
Adjust the device for standing or sitting positions, and switch between horizontal and vertical phone orientation.

6. Using the Remote Control

Once paired with your phone, the remote control allows you to remotely start and stop video recording or take photos, providing convenience for group shots or when you are away from the device.

A group of friends taking a selfie using the remote control with the SelfieShow tracking tripod.
The detachable remote control allows for convenient photo and video capture.

7. Official Product Video

This video demonstrates the auto face tracking and 360-degree rotation capabilities of the SelfieShow tripod with its dual selfie ring lights.

Maintenance

Cleaning

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the device is powered off before cleaning.

Storage

When not in use, store the tripod in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the device is fully charged before long-term storage to preserve battery life.

Troubleshooting

  • Device not powering on: Ensure the battery is charged. Connect to a power source and try again.
  • Tracking not working: Make sure the device is powered on and your face/body is clearly visible to the camera. Ensure you are within 1.5 meters for gesture control.
  • Lights not turning on: Check if the ring lights are securely attached and fully charged. Press the power button on each light.
  • Remote control not connecting: Ensure Bluetooth is enabled on your phone and the remote's battery is functional. Re-pair the remote if necessary.
  • Device wobbles or shakes: Ensure your phone is securely placed in the holder and the device is on a stable, flat surface. If using an external tripod, ensure it is stable.
  • Unresponsive behavior: Try turning the device off and then on again to reset it.

Specifications

FeatureSpecification
BrandSelfieShow
Model Name/NumberP01Pro/D07
Item Weight352 g
Item Dimensions7 x 3.7 x 3.7 inches
Compatible DevicesCellphone (Universal)
Mounting TypeSurface Mount
Additional FeaturesRotatable, Auto Face Tracking, Gesture Control, No App Required
Water Resistance LevelNot Water Resistant
Battery Capacity1200mAh (Built-in rechargeable)
Battery LifeUp to 5 hours
Light Modes3 (White, Natural, Warm Light)
LED Beads48 per light
Phone Clip Width1.5 - 4 inches
Tripod InterfaceStandard 1/4"

Warranty

This SelfieShow product comes with a 1-year manufacturer's warranty. Please retain your proof of purchase for any warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper maintenance.

Support

For further assistance, technical support, or inquiries regarding your SelfieShow Auto Face Tracking Tripod, please refer to the official SelfieShow website or contact their customer service. Contact information can typically be found on the product packaging or the brand's official online presence.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.