Lumary Smart Recessed Lighting Pro 6 Inch Instruction Manual

1. Introduction

This manual provides detailed instructions for the installation, setup, and operation of your Lumary Smart Recessed Lighting Pro 6 Inch. Please read this manual thoroughly before installation and retain it for future reference.

Image 1.1: Overview of the Lumary Smart Recessed Lighting Pro 6 Inch, including the light fixture, junction box, remote control, and smartphone app interface.

2. Important Safety Information

• Always turn off power at the circuit breaker before beginning installation.
• Consult a qualified electrician if you are unsure about the installation process.
• Ensure all electrical connections are secure and comply with local electrical codes.
• Do not use with dimmer switches. These smart lights are designed for app or remote dimming.
• This product is for indoor use only.
• Operating voltage: 110 Volts.

3. What's in the Box

Verify that all components are present before installation:

• 4x Recessed Light with J-Box
• 4x Installation Kits (2 Clips, 3 Wiring Caps per light)
• 1x Remote Control
• 1x Hole Cut-out Template
• 1x Instruction Manual (this document)

4. Product Specifications

5. Installation Guide

Follow these steps for proper installation. Ensure power is off at the circuit breaker before starting.

1. Prepare the Ceiling: Use the provided hole cut-out template to mark and create a hole in the ceiling. The advised hole cutout size is 6.29 inches (160mm).
2. Wiring Connections: Open the junction box. Using wire nuts, connect the wires from the ceiling to the corresponding wires in the junction box (e.g., black to black, white to white, ground to ground).
3. Insert Junction Box: Push the wired junction box through the mounting hole into the ceiling.
4. Connect Light to Junction Box: Connect the light fixture's cable to the junction box using the male/female connectors. Ensure a secure connection.
5. Secure the Light: Push the spring-loaded clips on the light fixture upwards and insert the fixture base into the mounting hole. Release the clips to secure the light flush against the ceiling.

Image 5.1: Visual guide demonstrating the five steps for installing the recessed light, from cutting the hole to securing the fixture.

Image 5.2: Detailed dimensions of the recessed light fixture and its accompanying junction box, including the advised hole cutout size of 6.29 inches.

6. Initial Setup and Connectivity

6.1 Lumary App Connection (Wi-Fi)

To unlock all smart features, connect your lights to the Lumary app:

1. Download App: Search for "Lumary" in your smartphone's app store and download it.
2. Register/Log In: Open the app and create an account or log in.
3. Add Device: Ensure your phone's Wi-Fi and Bluetooth are enabled. In the app, tap "Add Device" or the "+" icon. The app will search for nearby devices.
4. Connect to Wi-Fi: Select your 2.4GHz Wi-Fi network and enter the password. Note: Lumary smart lights only support 2.4GHz Wi-Fi.
5. Enjoy: Once connected, you can control your lights via the app.

Image 6.1: Step-by-step visual guide for downloading the Lumary app, adding a device, connecting to 2.4GHz Wi-Fi, and completing the setup.

6.2 Voice Assistant Integration (Alexa/Google Assistant)

Integrate your Lumary lights with voice assistants for hands-free control:

1. Access Light Control Page: In the Lumary app, navigate to the control page for your light.
2. Select Voice Assistant: Click the settings icon (usually a pencil or three dots) in the top right corner. Find and select the desired voice assistant (e.g., Alexa or Google Assistant) under "Third-party Control."
3. Link Account: Follow the on-screen prompts to link your Lumary account with your Alexa or Google Assistant account. This typically involves enabling the Lumary skill/action.
4. Pair: Once linked, the voice assistant will discover your lights. You can then use voice commands like "Alexa, turn on the night light" or "Hey Google, change the living room lights to blue."

Image 6.2: Visual instructions for linking Lumary lights with Amazon Alexa through the Lumary app.

Image 6.3: An illustration of voice commands being used to control the Lumary lights with Amazon Alexa, Google Assistant, and Apple Siri.

6.3 BT Remote Control Pairing

The included Bluetooth remote control provides an alternative control method:

1. Pairing Requirement: The lights must first be paired to 2.4GHz Wi-Fi through the Lumary App.
2. Initiate Pairing: Turn off and then turn on the lights using the wall switch.
3. Activate Remote: Within a few seconds of turning on the lights, press and hold one of the group buttons (A, B, C, or D) on the remote control until the lights flash, indicating successful pairing.

Image 6.4: Diagram illustrating the buttons and functions of the Bluetooth remote control, along with the pairing process.

7. Operating Instructions

7.1 Lighting Modes

Your Lumary Smart Recessed Light Pro offers three distinct lighting modes:

• Downlight Mode: Provides clear, bright illumination for daily activities.
• Nightlight Mode: Emits a soft, warm glow suitable for nighttime use, creating a relaxing atmosphere without harsh light.
• RGB Light Mode: Offers 16 million colors to create dynamic and vibrant lighting effects. The uplight (RGB) and downlight (CCT) can be used simultaneously or independently.

Image 7.1: A visual comparison of the standard downlight mode providing bright illumination and the soft nightlight mode creating a warm ambiance in a living room setting.

Image 7.2: An example of a living room showcasing the vibrant and diverse lighting possibilities with 16 million RGB colors, highlighting both uplight and downlight effects.

7.2 Color Temperature and Brightness Adjustment

Adjust the light's characteristics to suit your needs:

• Color Temperature: Adjustable from 2700K (warm white) to 6500K (cool white).
• Brightness: Adjustable from 1% to 100%.

These adjustments can be made via the Lumary app or the BT remote control.

Image 7.3: A visual representation of the adjustable color temperature (2700K to 6500K) and brightness (1% to 100%) settings for the downlight mode.

7.3 Scene Modes and Music Sync

The Lumary app provides various pre-set scene modes and a music sync feature:

• Scene Modes: Choose from 14+ scene modes (e.g., Night, Reading, Fun, Colorful, Birthday, Christmas) to instantly change the ambiance of your space.
• Music Sync: The lights can change color and intensity to match the beat of music or game sounds, enhancing your entertainment experience.

Image 7.4: Screenshot of the Lumary app displaying various pre-programmed scene modes like Night, Reading, Fun, and Colorful, allowing for quick ambiance changes.

7.4 Group Control

Control multiple lights simultaneously by creating groups in the Lumary app:

1. Select Device: In the Lumary app, select one of the devices you wish to group.
2. Create Group: Click the settings icon (usually a pencil or three dots) in the top right corner, then select the "Create Group" option.
3. Add Devices: Select all the lights you want to include in this group.
4. Save: Confirm and save the group. You can now control all lights in that group with a single command.

Image 7.5: Visual guide demonstrating how to select devices and create a group within the Lumary app for simultaneous control of multiple lights.

Image 7.6: An illustration showing how group control can be used to manage lights in various rooms like the living room, bedroom, and kitchen simultaneously.

7.5 Scheduling and Memory Function

• Scheduling: Set schedules for your lights to turn on/off or change modes at specific times, such as a gentle wake-up light in the morning or a nightlight for sleep.
• Memory Function: The lights retain their last setting (color, brightness, mode) when turned off and on again, eliminating the need to reset them each time.

Image 7.7: A visual example of the scheduling feature, demonstrating how to set lights to turn on in the morning and transition to a sleep mode at night.

8. Maintenance

The Lumary Smart Recessed Lights are designed for long-term use with minimal maintenance.

• Cleaning: Ensure the power is off before cleaning. Use a soft, dry cloth to wipe the surface of the light fixture. Do not use abrasive cleaners or solvents.
• No User-Serviceable Parts: The LED components are integrated and not user-replaceable. Do not attempt to disassemble the fixture.

9. Troubleshooting

• Light not turning on:
  • Check if the circuit breaker is on.
  • Verify all wiring connections are secure.
  • Ensure the light is properly seated in the mounting hole.
• Light not connecting to Wi-Fi:
  • Confirm your Wi-Fi network is 2.4GHz. 5GHz networks are not supported.
  • Ensure your smartphone is connected to the same 2.4GHz Wi-Fi network during setup.
  • Check Wi-Fi signal strength at the light's location.
  • Restart your Wi-Fi router and try connecting again.
• Remote control not working:
  • Ensure the lights are already paired to the Lumary app via Wi-Fi.
  • Re-attempt the remote pairing process (Section 6.3).
  • Check the remote control's battery.
• Voice control not responding:
  • Verify that your Lumary account is correctly linked to Alexa or Google Assistant (Section 6.2).
  • Ensure your voice assistant device is online and functioning correctly.
  • Try re-discovering devices in your Alexa or Google Home app.

10. Warranty and Support

Lumary Smart Recessed Lighting Pro products come with a limited warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Lumary website.

For technical support, troubleshooting assistance, or warranty claims, please contact Lumary customer service through their official website or the contact information provided in your product packaging.

Manufacturer: Lumary

Model Number: L-SD6G4

UPC: 850050217930