Wildgame Innovations Terra G2 BAT Trail Camera User Manual

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Wildgame Innovations Terra G2 BAT Trail Camera. The Terra G2 BAT is designed for outdoor use, capturing high-quality images and videos of wildlife with its 18MP sensor and 720p video capabilities. Its rapid 1-second trigger speed ensures you capture fleeting moments, while the Lightsout infrared flash provides clear night vision up to 65 feet without disturbing animals. The camera features a user-friendly LED display for easy configuration and monitoring.

Figure 1: Front view of the Wildgame Innovations Terra G2 BAT Trail Camera, showing the lens and infrared array.

2. Product Features

• 1-second trigger speed: Captures images and videos quickly to minimize missed events.
• 18MP/720p images and videos: Delivers high-resolution still photos and clear video recordings.
• 16:9 aspect ratio: Provides a wide cinematic view for videos.
• Lightsout infrared flash: Invisible flash technology for discreet night captures up to 65 feet.
• 65' flash range: Ensures effective illumination for night photography over a significant distance.
• LED display screen: Offers a clear interface for setup and menu navigation.
• User-friendly setup and maintenance: Designed for ease of use from initial setup to ongoing care.

3. What's in the Box

Upon opening the package, verify that all components are present:

• Wildgame Innovations Terra G2 BAT Trail Camera

Note: Batteries and SD card are sold separately.

4. Setup

4.1. Installing Batteries

The Terra G2 BAT Trail Camera requires batteries for operation. It is recommended to use new, high-quality AA alkaline or lithium batteries for optimal performance and battery life.

1. Locate the battery compartment on the back of the camera.
2. Open the latch and carefully open the compartment door.
3. Insert the required number of AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
4. Close the battery compartment door securely until the latch clicks into place to ensure water resistance.

Figure 2: Rear view of the camera with the battery and SD card compartments open, showing battery slots and SD card slot.

4.2. Inserting an SD Card

The camera saves images and videos to an SD card (up to 32GB, not included). Ensure the SD card is formatted before first use.

1. With the battery compartment open, locate the SD card slot.
2. Insert the SD card into the slot with the label facing up, until it clicks into place.
3. To remove, gently push the card in until it springs out.

4.3. Mounting the Camera

The Terra G2 BAT is designed for tree mounting. Choose a location that provides a clear view of the desired area and is within the camera's flash range (up to 65 feet).

1. Use the included mounting strap or a compatible tree mount (sold separately) to secure the camera to a tree or post.
2. Ensure the camera is stable and pointed correctly. Adjust the angle as needed.
3. For optimal performance, mount the camera at a height of approximately 3-6 feet from the ground.

Figure 3: Side view of the camera, illustrating the design and potential mounting points.

5. Operating the Camera

5.1. Powering On/Off

To power on the camera, locate the power switch (usually inside the battery compartment or on the side of the camera) and slide it to the "ON" position. The LED display will illuminate. To power off, slide the switch to the "OFF" position.

5.2. Navigating the LED Display and Settings

The LED display allows you to configure various camera settings. Use the navigation buttons (typically located near the display) to move through menus and select options.

• Mode Selection: Choose between Photo, Video, or Photo+Video modes.
• Resolution: Set image resolution (e.g., 18MP) and video resolution (e.g., 720p).
• Trigger Delay: Adjust the time interval between consecutive captures after a trigger event.
• Date/Time Stamp: Ensure the correct date and time are set for accurate record-keeping.
• Format SD Card: It is highly recommended to format the SD card directly through the camera's menu before each deployment to ensure compatibility and prevent data corruption.

Refer to the on-screen prompts and the camera's internal menu for specific button functions and detailed setting options.

6. Maintenance

Proper maintenance ensures the longevity and optimal performance of your trail camera.

• Cleaning: Gently wipe the camera lens and infrared array with a soft, lint-free cloth. Avoid abrasive materials or harsh chemicals. Clean the camera body with a damp cloth as needed.
• Battery Replacement: Replace batteries when the low battery indicator appears on the display or when performance degrades. Always replace all batteries at once with new ones of the same type.
• SD Card Management: Regularly check the SD card for available space. Transfer captured media to a computer and format the card in the camera before redeploying.
• Storage: When not in use, store the camera in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
• Seals: Periodically inspect the rubber seals around the battery and SD card compartments to ensure they are free of debris and not damaged, which could compromise water resistance.

7. Troubleshooting

If you encounter issues with your Terra G2 BAT Trail Camera, refer to the following common problems and solutions:

• Camera Not Powering On:
  • Ensure batteries are inserted correctly with proper polarity.
  • Replace old or depleted batteries with new ones.
  • Check that the power switch is in the "ON" position.
• No Images/Videos Captured:
  • Verify that an SD card is properly inserted and has sufficient free space.
  • Format the SD card using the camera's menu.
  • Check the camera's mode setting (Photo, Video, Photo+Video).
  • Ensure the camera is positioned correctly to detect motion within its range.
  • Adjust trigger delay settings if too long.
• Poor Image/Video Quality:
  • Clean the camera lens and infrared array.
  • Check resolution settings; ensure they are set to 18MP for images and 720p for videos.
  • For night images, ensure the subject is within the 65' flash range.
  • Avoid placing the camera where direct sunlight or strong artificial light can interfere with the sensor.
• Short Battery Life:
  • Use high-quality alkaline or lithium batteries.
  • Reduce the frequency of captures or video length if possible.
  • Extreme cold weather can significantly reduce battery performance.

If problems persist, contact Wildgame Innovations customer support for further assistance.

8. Specifications

9. Warranty and Support

Wildgame Innovations products are manufactured to high standards. Specific warranty details, including coverage period and terms, are typically provided with your purchase documentation or can be found on the official Wildgame Innovations website. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance beyond this manual, or warranty inquiries, please visit the official Wildgame Innovations website or contact their customer service department. You can often find contact information and FAQs on their support pages.

Online Resources: Wildgame Innovations Store on Amazon