ORALNER 27-Inch 3-Sided Electric Fireplace with Mantel User Manual

1. Important Safety Instructions

Please read all instructions carefully before using this electric fireplace. Failure to follow these instructions may result in electric shock, fire, or personal injury. Keep this manual for future reference.

General Safety

• Ensure the power outlet voltage matches the fireplace's requirements (120V AC, 60Hz).
• Do not operate the fireplace with a damaged cord or plug. If the cord or plug is damaged, contact customer support.
• Do not run the power cord under carpeting, throw rugs, runners, or similar coverings. Arrange the cord away from traffic areas where it will not be tripped over.
• To prevent electric shock, do not immerse the fireplace, plug, or cord in water or other liquids.
• Always unplug the fireplace when not in use, before cleaning, or before moving.
• Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the fireplace.
• Do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
• This fireplace is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the fireplace and keep them away from the sides and rear.
• Close supervision is necessary when any appliance is used by or near children or invalids.
• Do not use outdoors. This fireplace is intended for indoor use only.

Overheat Protection

This electric fireplace is equipped with a built-in overheat protection system. If the internal temperature of the fireplace becomes too high, the heater will automatically shut off to prevent damage or fire. If this occurs, unplug the unit, wait for 10-15 minutes for it to cool down, and then plug it back in. If the issue persists, ensure the air inlets and outlets are not obstructed and contact customer support.

2. Package Contents

Carefully unpack all items from the box and ensure you have received the following:

• 1 x ORALNER 27-Inch Electric Fireplace with Mantel
• 1 x Remote Control
• 1 x User Manual

3. Product Overview

The ORALNER 27-inch 3-Sided Electric Fireplace with Mantel provides realistic flame effects and efficient heating for your living space. Its freestanding design and elegant mantel make it a versatile addition to various room settings.

Figure 3.1: The ORALNER 27-inch Electric Fireplace with Mantel, showcasing its design in a typical room environment.

Key Features

• 3-Sided View: Transparent glass design allows the flame effect to be viewed from three sides.
• Realistic Flame Effects: Features 7 adjustable flame color modes (L1-L7) for varied ambiance.
• Efficient Heating: Provides 4,780 BTU heat output, capable of heating up to 400 sq.ft.
• Adjustable Thermostat: Maintains room temperature between 62°F and 82°F.
• Remote Control: Conveniently adjust settings from a distance.
• Timer Function: Programmable timer from 0.5 to 6 hours.
• Overheat Protection: Automatic shut-off for safety.
• Low-Noise Operation: Operates quietly to avoid disturbance.
• No Assembly Required: Ready to use out of the box.

Figure 3.2: The ORALNER electric fireplace showcasing its 3-sided glass view, allowing flames to be seen from multiple angles.

4. Setup and Installation

This electric fireplace is designed for ease of use and requires no assembly.

Placement Guidelines

• Place the fireplace on a firm, level surface.
• Ensure there is at least an 8-inch (20 cm) gap between the air inlet (located at the bottom front of the unit) and any wall or obstruction for proper air circulation.
• Maintain a safe distance from combustible materials as outlined in the safety instructions.
• Do not place the fireplace directly under a power outlet.

Power Connection

Once positioned, simply plug the power cord into a standard 120V AC, 60Hz grounded electrical outlet. The fireplace is now ready for operation.

5. Operating Instructions

The fireplace can be operated using either the control panel on the unit or the included remote control.

Control Panel

The control panel is located on the front of the fireplace. It includes the following buttons:

• Power (ON/OFF): Turns the fireplace on or off.
• Heater (62°F-82°F): Activates or deactivates the heating function and adjusts the temperature.
• Flame Control (L1-L7): Cycles through the 7 flame color modes.
• Timer Control (0.5-6H): Sets the automatic shut-off timer.
• Temp Up (▲): Increases the set temperature.
• Temp Down (▼): Decreases the set temperature.

Figure 5.1: Detailed view of the fireplace's integrated control panel with clearly labeled buttons.

Remote Control

The remote control provides convenient access to all functions. It requires one CR2025 battery (not included or pre-installed in some cases). Please ensure the battery is correctly inserted before use.

Figure 5.2: A hand holding the remote control for the ORALNER electric fireplace, highlighting its functions and effective control distance.

Operating Functions

• Power On/Off: Press the Power button (⏻) on the control panel or remote to turn the unit on or off.
• Flame Effect Adjustment: Press the Flame Control button (🔥) to cycle through the 7 available flame color modes (L1 to L7).
• Heating Function: Press the Heater button (🌡️) to activate the heating function. Use the Temp Up (▲) and Temp Down (▼) buttons to set your desired temperature between 62°F and 82°F. Press the Heater button again to turn off the heating function.
• Timer Function: Press the Timer Control button (⏱️) to set the automatic shut-off timer. Each press will cycle through 0.5H, 1H, 2H, 3H, 4H, 5H, 6H, and then off.

Figure 5.3: Close-up of the electric fireplace's realistic log set and brick interior, showcasing the 7 adjustable flame color modes.

6. Maintenance

Regular maintenance will help ensure the longevity and optimal performance of your electric fireplace.

Cleaning

• Always unplug the fireplace before cleaning.
• Exterior: Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
• Glass Panel: Clean the glass panel with a soft cloth and a standard glass cleaner. Avoid spraying cleaner directly onto the unit; instead, apply it to the cloth first.
• Air Inlets/Outlets: Periodically vacuum or wipe the air inlets and outlets to remove dust and debris, ensuring proper airflow.

Storage

If storing the fireplace for an extended period, unplug it and store it in a cool, dry place, preferably in its original packaging, to protect it from dust and damage.

7. Troubleshooting

If you experience any issues with your fireplace, please refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact ORALNER customer support.

8. Specifications

Detailed specifications for your ORALNER Electric Fireplace:

Figure 8.1: Diagram illustrating the precise dimensions of the ORALNER 27-inch electric fireplace.

Figure 8.2: Infographic detailing the heating capabilities of the fireplace, including heat output, coverage, thermostat range, and heating power.

9. Warranty and Support

Manufacturer's Warranty

This ORALNER electric fireplace comes with a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized repairs, or normal wear and tear.

Customer Support

For warranty claims, technical assistance, or any questions regarding your product, please contact ORALNER customer support. Please have your model number (SF230-25J) and proof of purchase ready when contacting support.

Manufacturer Contact Information: Guelph, Ontario, Canada

For the most up-to-date contact information, please visit the official ORALNER website or refer to your purchase documentation.