Devoko Electric Sit-Stand Desk 120x80cm User Manual

1. Introduction

Thank you for choosing the Devoko Electric Sit-Stand Desk. This manual provides essential information for the safe assembly, operation, and maintenance of your new desk. Please read these instructions carefully before use and retain them for future reference.

This electric sit-stand desk is designed to promote a healthier work environment by allowing seamless transitions between sitting and standing positions. It features an adjustable height range, a convenient Type-C charging port, three memory presets, and integrated cable management solutions.

Image 1.1: The Devoko Electric Sit-Stand Desk in a typical office setup.

2. Safety Information

To ensure safe operation and prevent damage, please observe the following safety guidelines:

• This desk can support a maximum weight of 70 kg. Do not exceed this capacity.
• Ensure all components are securely fastened before use.
• Keep children and pets away from the desk during height adjustments.
• Do not place hands or objects in the path of moving parts.
• The desk is equipped with an anti-collision technology. However, always be aware of your surroundings during operation.
• Unplug the power cord before cleaning or performing any maintenance.
• Do not disassemble or modify the motor or control system. Contact customer support for repairs.
• Avoid exposing the desk to excessive moisture or direct sunlight.

The motor has undergone extensive testing to ensure user safety. The desk also features overheat protection.

3. Package Contents

Please check the package contents against the list below. If any items are missing or damaged, contact customer support.

• Desktop (multi-part)
• Desk Frame (legs, crossbar)
• Motor and Control Box
• Control Panel with Type-C Port
• Power Adapter and Cable
• Cable Management Tray (x1)
• Headphone Hooks (x2)
• Adjustable Feet (x4)
• Assembly Hardware (screws, Allen wrenches)
• User Manual

Image 3.1: Underside components including the motor, cable tray, and hooks.

Image 3.2: Detailed view of integrated features like hooks, cable pass-through, cable tray, and adjustable feet.

4. Setup and Assembly

Assembly is straightforward. Follow the included graphical instructions for detailed steps. A screwdriver (not included) will be helpful for attaching the desktop sections.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
2. Assemble Desk Frame: Attach the legs to the crossbar and motor assembly using the provided hardware and Allen wrenches. Ensure all screws are tightened.
3. Assemble Desktop: The desktop comes in multiple sections. Align and secure these sections together using the provided connectors and screws.
4. Attach Desktop to Frame: Place the assembled desktop onto the frame and secure it with screws.
5. Install Control Panel and Accessories: Mount the control panel, cable management tray, and headphone hooks to the underside of the desktop as indicated in the assembly guide.
6. Connect Wiring: Connect the motor and control panel cables to the control box, then connect the power adapter.
7. Adjust Feet: Level the desk by adjusting the feet at the bottom of the legs.

Note: Some reviews indicate the desktop may come in 4 pieces. Ensure proper alignment during assembly for a smooth surface.

5. Operating Instructions

5.1. Height Adjustment

The desk height can be adjusted between 72 cm and 118 cm.

• Press and hold the Up (▲) button to raise the desk.
• Press and hold the Down (▼) button to lower the desk.

Release the button when the desired height is reached. The current height will be displayed on the control panel's LED screen.

Image 5.1: The desk's adjustable height range from 72cm to 118cm.

5.2. Memory Presets

The control panel allows you to save and recall up to three preferred height settings.

1. Set a Memory Position:
   a. Adjust the desk to your desired height using the Up/Down buttons.
   b. Press the "S" button (Set). The display will show "S-".
   c. Within 3 seconds, press one of the number buttons ("1", "2", or "3") to save the current height to that preset. The display will show the saved number.
2. Recall a Memory Position:
   a. Simply press the corresponding number button ("1", "2", or "3"). The desk will automatically move to the saved height.

Image 5.2: The smart control panel with height display, memory buttons, and Type-C port.

5.3. Type-C Charging Port

The integrated Type-C port on the control panel allows you to conveniently charge your compatible devices.

• Connect your device's Type-C charging cable to the port on the control panel.
• Ensure the desk is powered on for charging functionality.

5.4. Cable Management

Utilize the cable management tray and cable pass-through holes to keep your workspace tidy and organized.

• Route power cords and device cables through the cable pass-through holes on the desktop.
• Place excess cables and power strips in the cable management tray located under the desk.
• Use the integrated hooks on the side of the desk to hang headphones or bags.

5.5. Anti-Collision Technology

The desk is equipped with an anti-collision system that detects obstacles during height adjustment. If an obstruction is detected, the desk will automatically stop and reverse slightly to prevent damage or injury.

• Ensure there are no objects directly above or below the desk that could interfere with its movement.
• If the anti-collision system is triggered frequently, check for persistent obstructions.

6. Maintenance

Regular maintenance helps prolong the life of your desk.

• Cleaning: Wipe the desktop and frame with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals.
• Inspection: Periodically check all screws and connections to ensure they are tight. Retighten if necessary.
• Cable Management: Ensure cables are not pinched or tangled, especially during height adjustments.

7. Troubleshooting

If you encounter issues with your Devoko Electric Sit-Stand Desk, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Devoko customer support for further assistance.

8. Specifications

9. Warranty and Support

For warranty information, product support, or to report any issues, please contact Devoko customer service through your purchase platform or the official Devoko website. Please have your model number (0077) and purchase details ready when contacting support.