1. Introduction
Thank you for choosing the EMKE Electric Towel Rail. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new towel rail. Please read this manual thoroughly before installation and keep it for future reference.
This electric towel rail, model 1041x400mm 400W, is designed to provide warmth for towels and contribute to bathroom heating. It features a robust low-carbon steel construction, an integrated thermostatic heating element, and a timer function for optimal energy efficiency and user convenience.
Image: The EMKE Electric Towel Rail, anthracite color, installed in a modern bathroom setting, showcasing its design and integrated thermostat.
2. Safety Information
WARNING: Electrical appliances can pose hazards if not installed and operated correctly. Always follow these safety guidelines:
- Installation must be performed by a qualified electrician and in accordance with local electrical regulations.
- Always disconnect the power supply before installation, maintenance, or cleaning.
- This appliance is rated IP44, providing protection against splashing water, making it suitable for bathroom use. However, do not immerse the unit in water.
- Do not touch the hot surfaces of the towel rail during operation. Use caution and supervise children or individuals with reduced physical, sensory, or mental capabilities.
- Ensure the power cord is not damaged or pinched during installation.
- The heating rod must always be mounted at the bottom edge of the radiator. Incorrect installation can lead to malfunction or damage.
- Do not cover the towel rail with excessive items that could impede heat dissipation.
3. Package Contents
Verify that all components are present before beginning installation:
- EMKE Electric Towel Rail (1 unit)
- Thermostatic Heating Element (pre-installed)
- Mounting Brackets (4 units)
- Rubber Rings (4 units)
- Long Screws (4 units)
- Small Screws (4 units)
- Installation Manual (this document)
Image: Included accessories, showing supports, rubber rings, long screws, and small screws.
The towel rail is securely packaged in a reinforced four-layer carton to prevent damage during transit. The packaging includes bubble wrap, corner protection, honeycomb cardboard, and corrugated cardboard.
Image: Diagram illustrating the four layers of packaging: bubble plastic, corner protection, honeycomb cardboard, and corrugated cardboard.
4. Setup and Installation
The EMKE Electric Towel Rail comes with the electric heating rod pre-installed and pre-filled with antifreeze. The thermostatic head needs to be installed onto the heating rod. Ensure the power supply is disconnected before starting installation.
4.1. Installation Steps
- Preparation: Ensure the power supply to the installation area is turned off at the main breaker.
- Positioning: Determine the desired mounting location on the wall. Refer to the technical drawing for precise measurements and ensure adequate clearance.
- Marking: Use the provided mounting brackets as a template to mark the drilling points on the wall.
- Drilling: Drill holes at the marked points suitable for the wall plugs and long screws.
- Mounting Brackets: Insert the wall plugs, then secure the mounting brackets to the wall using the long screws.
- Attaching the Towel Rail: Carefully align the towel rail with the mounted brackets and secure it using the small screws. The adjustable wall distance (99-115mm) allows for minor adjustments.
- Thermostat Head Installation: Attach the thermostatic head to the pre-installed heating rod. Ensure it is securely fastened. The heating rod is installed on the left side of the towel rail.
- Power Connection: Once the towel rail is securely mounted and the thermostatic head is attached, connect the power plug to a suitable electrical outlet.
- Final Check: Double-check all connections and mounting points for stability. Restore power to the circuit.
Image: Diagram illustrating the easy installation process, showing the connection of the thermostatic head to the pre-installed heating element and wall mounting.
Image: Installation notes, emphasizing that the heating rod must always be mounted at the bottom edge of the radiator. Incorrect placements are shown with an 'X'.
Image: Technical drawing providing detailed dimensions (1041mm height, 400mm width) and wall distance (99-115mm) for installation planning.
Image: Diagram illustrating the adjustable wall distance feature, showing a range of 99-115mm for flexible installation.
5. Operating Instructions
The EMKE Electric Towel Rail features an intuitive thermostatic control for temperature and timer settings.
5.1. Thermostat Controls
Image: Close-up of the electric heating rod with thermostat, showing the digital display and control buttons for temperature and timer settings.
Image: Detailed view of the thermostat control panel, indicating buttons for mode change, temperature decrease/increase, and power, along with timer settings (2H/4H/6H/8H) and temperature range (30°C-70°C).
- Power Button: Press to turn the unit ON or OFF.
- Temperature Adjustment: Use the '+' and '-' buttons to set the desired temperature. The adjustable range is 30°C to 70°C.
- Timer Function: Press the timer button to cycle through preset operating durations: 2 hours, 4 hours, 6 hours, or 8 hours. The unit will automatically turn off after the selected time.
- Chronometer Mode: In this mode, the radiator operates at maximum power and maintains a temperature of 65°C.
5.2. Energy Saving Tips
- Utilize the timer function to heat towels only when needed.
- Set the temperature to the lowest comfortable setting.
- Avoid placing items that block airflow around the towel rail.
- The optimized design of this towel rail can save up to 30% energy compared to classic radiators.
6. Maintenance
Regular maintenance ensures the longevity and efficient operation of your EMKE Electric Towel Rail.
- Cleaning: Disconnect the power supply before cleaning. Wipe the surface with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Inspection: Periodically check the power cord for any signs of damage. Ensure all mounting screws are tight.
- No User Serviceable Parts: The internal components, including the heating element, are not user-serviceable. Do not attempt to open or repair the unit yourself. Contact qualified personnel for any repairs.
7. Troubleshooting
If you encounter issues with your EMKE Electric Towel Rail, refer to the following table before contacting customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Towel rail does not heat up. | No power supply. Thermostat set too low. Timer expired. | Check if the power plug is securely inserted and the circuit breaker is ON. Increase the thermostat temperature setting. Reset the timer or set to continuous operation. |
| Towel rail is not heating sufficiently. | Temperature setting too low. Room size exceeds application area. Excessive items covering the rail. | Increase the thermostat temperature setting. Ensure the towel rail is appropriate for the room size (4㎡ for this model). Remove excess items to allow proper heat dissipation. |
| Unusual noises from the unit. | Loose mounting. Internal issue. | Check and tighten all mounting screws. Disconnect power and contact customer support if noises persist. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | EMKE |
| Model | 1041x400mm 400W |
| Dimensions (H x W) | 1041 mm x 400 mm |
| Power Output | 400 W |
| Power Supply | AC 220-240 V / 50 Hz |
| Application Area | Up to 4 m² |
| Wall Distance (Adjustable) | 99-115 mm |
| Product Weight | 15.6 kg |
| Material | Low-carbon steel (Q195) with environmental powder coating |
| Protection Rating | IP44 (splash-proof) |
| Thermostat Temperature Range | 30°C to 70°C |
| Operating Temperature Conditions | 0°C to 55°C |
| Timer Settings | 2H / 4H / 6H / 8H |
| Special Features | Radiator heating, Thermostatic resistance, Timer function, Towel drying |
Image: Illustration showing heat distribution from the towel rail and a diagram of the adjustable wall distance (99-115mm).
Image: Cross-section diagram detailing the towel rail's structure, including the interior coating, low-carbon steel coating, and environmentally friendly powder coating.
9. Warranty and Support
EMKE is committed to providing high-quality products and excellent customer service. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims.
For technical support, troubleshooting assistance beyond this manual, or warranty inquiries, please contact EMKE customer service through the retailer where you purchased the product or visit the official EMKE brand store online:
EMKE Brand Store: https://www.amazon.es/stores/EMKE/page/FC204342-74EB-477E-BDCB-648D3C5DA6FC
Our customer service team is available to assist you with any questions or concerns you may have regarding your EMKE Electric Towel Rail.
