CANDY Condensation Tumble Dryer CSOE C10TBE-47 User Manual

Product Overview

The Candy CSOEC10TBE-47 is a high-capacity condensation tumble dryer designed for efficient and convenient laundry care. It offers a 10 kg drying capacity, making it suitable for large households. This model features advanced connectivity options, including Wi-Fi and Bluetooth, allowing access to 32 additional programs via the hOn App.

Key design elements include a wide porthole and a raised drum for enhanced user comfort during loading and unloading. The appliance also incorporates a unique water collection tank conveniently located in the door, simplifying the emptying process.

Equipped with a variety of drying programs such as Cotton, Eco, Synthetics, Dark & Colored, Jeans, De-creasing, and a 20-minute Refresh cycle, it caters to diverse fabric types and drying needs. A delayed start function provides flexibility, enabling users to run cycles during off-peak electricity hours.

The control panel includes a clear display showing the remaining cycle time, ensuring users are always informed about the drying progress.

Figure 1: Front view of the Candy CSOEC10TBE-47 Tumble Dryer.

Setup and Installation

Unpacking

1. Carefully remove the appliance from its packaging.
2. Inspect the dryer for any signs of transport damage. Report any damage to your retailer immediately.
3. Remove all internal packing materials and protective films.

Positioning

• Place the dryer on a firm, level floor.
• Ensure adequate ventilation around the appliance. Do not obstruct the ventilation openings.
• Maintain a minimum distance of 10 cm from walls or other furniture.
• Avoid installing the dryer in rooms where the temperature may fall below 5°C, as this can affect performance.

Electrical Connection

• Before connecting, ensure the mains voltage matches the rating plate on the appliance.
• Connect the dryer to a properly earthed power socket.
• Do not use extension cords or multi-plugs.

Operating Instructions

Loading Laundry

• Sort laundry by fabric type and desired drying level.
• Open the dryer door and load laundry, ensuring not to overload the drum. The maximum capacity is 10 kg.
• Close the door firmly until it clicks.

Selecting a Program

• Turn the program selector knob to choose the desired drying program (e.g., Cotton, Synthetics, Jeans).
• Refer to the program guide in the full manual for detailed descriptions of each program.
• Use the hOn App for access to 32 additional programs via Wi-Fi and Bluetooth connectivity.

Starting a Cycle

• Press the Start/Pause button to begin the drying cycle.
• The display will show the estimated remaining time.
• To use the delayed start function, press the Delay Start button repeatedly to set the desired delay time, then press Start/Pause.

End of Cycle

• The dryer will signal the end of the cycle.
• Remove laundry promptly to minimize creasing.

Maintenance

Emptying the Water Container

The water collection tank is located in the door of the appliance. It must be emptied after each drying cycle to ensure optimal performance.

1. Pull out the water container from its housing in the door.
2. Empty the collected water into a sink or drain. The water can also be used for non-potable purposes, such as watering plants.
3. Reinsert the water container firmly until it clicks into place.

Figure 2: Emptying the EasyCase Water Container.

Cleaning the Lint Filter

The lint filter should be cleaned after every cycle to prevent lint buildup and maintain drying efficiency.

1. Open the dryer door.
2. Pull out the lint filter located inside the door opening.
3. Remove any accumulated lint by hand or with a soft brush.
4. Rinse the filter under running water if necessary, and ensure it is completely dry before reinserting.
5. Push the filter back into its slot until it is securely in place.

Cleaning the Condenser

The condenser unit should be cleaned periodically, typically every few months, depending on usage.

1. Ensure the dryer is unplugged from the power supply.
2. Open the condenser cover, usually located at the bottom front of the appliance.
3. Remove the condenser unit.
4. Rinse the condenser under running water to remove any lint or debris. Use a soft brush if needed.
5. Allow the condenser to dry completely before reinserting.
6. Close the condenser cover securely.

Exterior Cleaning

• Wipe the exterior surfaces of the dryer with a soft, damp cloth.
• Do not use abrasive cleaners or solvents.

Troubleshooting

If the problem persists after attempting these solutions, please contact customer support.

Specifications

Figure 3: Energy Label for CSOEC10TBE-47.

Warranty and Support

This Candy CSOEC10TBE-47 tumble dryer comes with a 1-year manufacturer's warranty from the date of purchase.

Spare parts for this model are available for a period of 11 years from the date of manufacture, ensuring long-term serviceability.

Customer Support

For technical assistance, warranty claims, or to order spare parts, please contact Candy customer service. Refer to your purchase documentation or the official Candy website for contact details specific to your region.

When contacting support, please have your model number (CSOEC10TBE-47) and serial number (found on the rating plate) ready.