Introduction
This manual provides essential instructions for the installation, operation, and maintenance of your JONSBO TK-1 Micro ATX Mini Tower Computer Case. Please read this manual thoroughly before proceeding with assembly to ensure proper setup and safe usage.
Safety Information
- Always disconnect power before installing or servicing components.
- Handle tempered glass panels with care to prevent breakage.
- Ensure proper grounding to prevent electrical hazards.
- Keep small parts away from children.
Package Contents
Verify that all items are present in your package:
- JONSBO TK-1 Micro ATX Mini Tower Computer Case
- Accessory Kit (screws, zip ties, brackets)
- User Guide (this document)
Specifications
| Model Name | TK-1 |
| Dimensions (L x W x H) | 299mm (W) x 310mm (D) x 345mm (H) (11.8 x 12.2 x 13.5 inches) |
| Motherboard Compatibility | Micro ATX, MATX, Mini-ITX |
| Case Type | Mini Tower |
| Material | Aluminum, Metal, Tempered Glass |
| GPU Length Support | Max. 280mm |
| CPU Cooler Height Support | Max. 165mm |
| AIO Radiator Support | 240mm (Top) |
| PSU Support | ATX (Max. 220mm) |
| Drive Bays | 2 x 3.5" HDD or 1 x 2.5" SSD / 1 x 3.5" HDD |
| Front I/O Ports | 1 x USB 3.2 Gen2 Type-C (10Gbps), 1 x USB 3.0, 1 x Audio & Mic |
| Expansion Slots | 4 |
Setup and Installation
1. Preparing the Case
The JONSBO TK-1 features a separated cabinet structure and hyperboloid glass design. Carefully remove the tempered glass side panels by unscrewing the thumb screws at the rear of the case. Place the panels on a soft, flat surface to prevent scratches.

Image: Rear view of the JONSBO TK-1 case, showing the removal of side panels for access to internal components.
2. Motherboard Installation
Install your Micro-ATX, MATX, or Mini-ITX motherboard into the main compartment. Ensure standoffs are correctly aligned before securing the motherboard with screws from the accessory kit.

Image: Interior view of the JONSBO TK-1 case, illustrating the motherboard installation area.
3. Power Supply Unit (PSU) Installation
The case supports ATX power supplies up to 220mm in length. Install the PSU in its designated compartment, typically located at the rear or bottom, and secure it with screws.

Image: View of the JONSBO TK-1 case showing the power supply unit installed in its dedicated compartment.
4. Graphics Card (GPU) Installation
The case accommodates GPUs up to 280mm in length. Install your graphics card into the appropriate PCIe slot on the motherboard and secure it.

Image: Front view of the JONSBO TK-1 case, highlighting the graphics card installed within the main chamber.
5. Cooling System Setup
The TK-1 supports various cooling configurations:
- Top: 2 x 120mm fans or 240mm AIO liquid cooler.
- Bottom: 2 x 120mm fans.
- CPU Cooler: Max height 165mm.

Image: Internal view of the JONSBO TK-1 case, showcasing the installation of cooling fans and an AIO liquid cooler.
6. Drive Bay Configuration
The case offers flexible storage options:
- 2 x 3.5" HDD
- OR 1 x 2.5" SSD and 1 x 3.5" HDD
Utilize the provided brackets and screws to secure your storage devices.
7. Cable Management
Route all necessary cables (power, data, front I/O) neatly through the designated cutouts and tie-down points. This improves airflow and aesthetics.
8. Front I/O Ports
Connect the front I/O cables from the case to the corresponding headers on your motherboard. The front panel includes:
- 1 x USB 3.2 Gen2 Type-C (10Gbps)
- 1 x USB 3.0
- 1 x Audio & Mic combo jack
Operating Instructions
Power On/Off
Press the power button located on the front panel to turn your system on or off. Ensure all external peripherals are connected before powering on.
Fan Control
Fan speed and RGB lighting (if applicable) can typically be controlled via your motherboard's BIOS/UEFI settings or dedicated software provided by your motherboard manufacturer.
Maintenance
Cleaning
Regularly clean the dust filters and interior of your case to maintain optimal airflow and cooling performance. Use compressed air to remove dust from fans and heatsinks.
Tempered Glass Care
- Clean glass panels with a soft, lint-free cloth and a mild glass cleaner.
- Avoid abrasive materials or harsh chemicals.
- The 4mm tempered glass panels have a 2H hardness explosion-proof protective film applied; do not remove this film.
Troubleshooting
System Not Powering On
- Check all power connections, including the PSU to the wall outlet, and internal connections to the motherboard and components.
- Verify that the front panel power switch cable is correctly connected to the motherboard.
Overheating Issues
- Ensure all case fans are properly installed and functioning.
- Verify that CPU cooler and GPU fans are spinning.
- Clean dust filters and internal components to improve airflow.
No Display Output
- Confirm that your monitor is connected to the graphics card (GPU) and not the motherboard's integrated graphics ports (unless integrated graphics are intended for use).
- Reseat the graphics card and RAM modules.
Product Videos
JONSBO TK-1 Micro ATX Mini Tower Computer Case Overview
Video: An official overview of the JONSBO TK-1 Micro ATX Mini Tower Computer Case, showcasing its design, features, and internal layout. This video provides a visual guide to the case's aesthetics and component compatibility.
JONSBO TK-0 ITX Mini Tower Case Features (Similar Design)
Video: A detailed look at the JONSBO TK-0 ITX Mini Tower PC Case, which shares a similar hyperboloid glass design and structural elements with the TK-1. This video can provide insights into general assembly and feature highlights.
Warranty and Support
JONSBO products come with a limited warranty. For detailed warranty information, technical support, or replacement parts, please visit the official JONSBO website or contact your local retailer.
Official JONSBO Store: JONSBO Amazon Store