Pipishell PIET06K2

Pipishell C Shaped End Table Set of 2 Instruction Manual

Model: PIET06K2 | Brand: Pipishell

Introduction

Thank you for choosing the Pipishell C Shaped End Table Set. These versatile and space-saving tables are designed to enhance your living space, providing convenient surfaces for various activities. This manual provides essential information for the proper assembly, use, and maintenance of your new end tables.

Two Pipishell C Shaped End Tables with rustic brown tops and black metal frames.

Image: Two C Shaped End Tables, showcasing their design and rustic brown finish.

Package Contents

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

  • Tabletop (2 pieces)
  • Metal Frame (2 pieces)
  • Adjustable Feet (8 pieces)
  • Screws and Allen Wrench (sufficient quantity for assembly)
  • Assembly Guide (this document)
Components of the C Shaped End Table, including the tabletop, metal frame, and hardware.

Image: All individual components of the C Shaped End Table laid out for inspection.

Assembly Instructions

Follow these steps carefully to assemble your Pipishell C Shaped End Tables. It is recommended to assemble on a soft, clean surface to prevent scratches.

  1. Step 1: Attach the Tabletop to the Frame. Align the pre-drilled holes on the tabletop with the holes on the top section of the metal frame. Insert screws and tighten them using the provided Allen wrench. Do not overtighten initially.
  2. Assembly Step 1: Attaching the tabletop to the metal frame.

    Image: Illustration of the tabletop being secured to the upper part of the metal frame.

  3. Step 2: Secure the Frame. Ensure the frame is properly aligned and all screws are in place. Gradually tighten all screws until the tabletop is firmly attached to the frame.
  4. Assembly Step 2: Securing the metal frame components together.

    Image: Diagram showing the frame being fully assembled and tightened.

  5. Step 3: Attach Adjustable Feet. Screw the adjustable feet into the designated holes on the bottom of the metal frame. These feet help stabilize the table on uneven surfaces and protect your floor.
  6. Close-up of the adjustable feet on the base of the C Shaped End Table.

    Image: Detail of the adjustable feet at the base of the table frame.

  7. Step 4: Final Check. Once assembled, gently shake the table to ensure stability. Adjust the feet as needed to eliminate any wobbling. Repeat for the second table.

Usage

The C-shaped design allows these tables to slide easily under sofas, chairs, or beds, bringing items closer to you. They are suitable for various uses:

  • Laptop Table: Use it as a convenient surface for your laptop while working or browsing from your couch.
  • Snack/Drink Table: Keep your beverages, snacks, or remote controls within easy reach.
  • Bedside Table: Slide it under your bed for a compact nightstand alternative.
  • Reading Nook: Perfect for holding a book, magazine, or a cup of tea in a cozy corner.
Pipishell C Shaped End Table used as a laptop table next to a chair.

Image: A C Shaped End Table positioned next to an armchair, holding a laptop and a cup.

Pipishell C Shaped End Table used as a breakfast tray over a bed.

Image: A C Shaped End Table serving as a breakfast tray, positioned over a bed.

Care and Maintenance

To ensure the longevity and appearance of your end tables, please follow these care guidelines:

  • Cleaning: Wipe surfaces with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals, as they may damage the finish.
  • Spills: Clean up spills immediately to prevent staining.
  • Heat and Moisture: Avoid placing hot items directly on the tabletop. Use coasters for drinks to protect against moisture rings.
  • Sunlight: Prolonged exposure to direct sunlight may cause fading or discoloration.
  • Stability: Periodically check and tighten all screws to maintain structural integrity.

Troubleshooting

If you encounter any issues with your end tables, refer to the following common solutions:

ProblemPossible CauseSolution
Table is wobblyLoose screws or uneven floorTighten all assembly screws. Adjust the leveling feet on the bottom of the frame to compensate for uneven surfaces.
Surface scratches or damageSharp objects or abrasive cleaningAvoid dragging sharp objects across the surface. Use soft cloths for cleaning. For minor scratches, furniture repair kits may be used.
Difficulty sliding under furnitureObstruction or insufficient clearanceEnsure there are no obstructions under your sofa/bed. Verify the height clearance of your furniture matches the table's dimensions (27.2 inches).

Specifications

  • Brand: Pipishell
  • Model Name: PIET06K2
  • Product Dimensions (D x W x H): 12.6" x 20.5" x 27.2" (32 cm x 52 cm x 69 cm)
  • Color: Rustic Brown
  • Material: Wood (top), Metal (frame)
  • Table Design: Tray Table / C Shaped
  • Number of Items: 2
  • Indoor/Outdoor Usage: Indoor
Diagram showing the dimensions of the C Shaped End Table: 19.7 inches wide, 11.8 inches deep, and 27.2 inches high.

Image: Dimensional drawing of the C Shaped End Table, indicating height, width, and depth.

Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Pipishell website. Protection plans may be available for purchase separately to extend coverage for your product.

For additional assistance, you may contact Pipishell customer service directly.

© 2024 Pipishell. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.