FLEXISPOT M7SB

FLEXISPOT 28-inch Black Height Adjustable Standing Desk Converter M7SB User Manual

Model: M7SB | Brand: FLEXISPOT

Introduction

This manual provides essential information for the proper setup, operation, and maintenance of your FLEXISPOT 28-inch Black Height Adjustable Standing Desk Converter. Designed to promote a healthier work environment, this desk converter allows you to effortlessly switch between sitting and standing positions throughout your workday. Please read this manual thoroughly before use to ensure optimal performance and safety.

FLEXISPOT 28-inch Black Height Adjustable Standing Desk Converter with monitor and laptop.

This image displays the FLEXISPOT 28-inch Black Height Adjustable Standing Desk Converter in a typical office setup, featuring a monitor on the upper tier and a laptop on the lower keyboard tray.

Safety Information

Follow general safety guidelines for height-adjustable desks, such as not exceeding the listed weight capacity, ensuring stability while changing positions, maintaining proper posture, and taking breaks when standing extended periods. Additionally, be cautious using the spring-assisted lift mechanism to avoid injury.

Parts Included

  • Main Desk Converter Unit
  • Removable Keyboard Tray
  • Assembly Hardware (screws, tools if applicable)
  • User Manual

Setup & Assembly

Initial Setup

  1. Carefully remove all components from the packaging.
  2. Place the main desk converter unit on a stable, flat desk surface.
  3. Attach the removable keyboard tray to the designated slots on the main unit. Ensure it clicks securely into place.
  4. Verify all connections are secure before placing any equipment on the converter.

The FLEXISPOT desk converter is designed for quick and easy assembly, allowing you to set up your ergonomic workstation in minutes without complex tools.

Operating Instructions

Adjusting Height

The desk converter features a spring-assisted lift mechanism for smooth and effortless height adjustments. To raise or lower the workstation:

  1. Clear any obstructions from around the desk converter.
  2. Locate the adjustment lever, typically on the right side of the unit.
  3. Gently squeeze the lever and guide the desktop to your desired height.
  4. Release the lever to lock the workstation securely in place.
Hand operating the height adjustment lever on the FLEXISPOT Standing Desk Converter.

A close-up of a hand engaging the lever mechanism used to smoothly adjust the height of the desk converter.

Workspace Utilization

The two-tier design provides ample space for your essential office equipment:

  • Upper Tier: Ideal for placing monitors, laptops, and other display devices.
  • Lower Keyboard Tray: Designed to comfortably accommodate a keyboard, mouse, and even a 17-inch laptop, promoting ergonomic wrist and arm positioning.
FLEXISPOT Standing Desk Converter showing placement options for monitors, keyboard, and mouse.

This image demonstrates the versatile placement options, with monitors on the upper surface and a keyboard and mouse on the lower, ergonomic tray.

Maintenance

To ensure the longevity and smooth operation of your FLEXISPOT desk converter, follow these maintenance guidelines:

  • Regularly wipe down surfaces with a soft, damp cloth to remove dust and debris. Avoid harsh chemicals.
  • Periodically check all screws and connections to ensure they remain tight.
  • Ensure the spring-assisted mechanism moves freely and is not obstructed.
  • Do not exceed the maximum weight capacities for the desktop (44 lbs) and keyboard tray (11 lbs).

Troubleshooting

If you encounter any issues with your desk converter, refer to the following common solutions:

  • Difficulty Adjusting Height: Check for any obstructions in the lifting mechanism. Ensure the lever is fully engaged when attempting to adjust. Verify that the weight on the desk does not exceed the maximum capacity.
  • Instability/Wobbling: Ensure the desk converter is placed on a flat, stable surface. Check that all assembly screws are tightened.
  • Keyboard Tray Not Secure: Re-check that the keyboard tray is correctly inserted into its slots and the locking mechanisms are engaged.

For persistent issues not covered here, please contact FLEXISPOT customer support.

Product Specifications

FeatureSpecification
BrandFLEXISPOT
Model Number28
Product Dimensions16.3"D x 28"W x 19.7"H
ColorBlack
StyleModern
Base MaterialAlloy Steel
Finish TypeWood, Steel
Special FeatureAdjustable Height
Included ComponentsKeyboard Tray, Laptop Stand
Maximum Weight Recommendation (Desktop)44 Pounds
Maximum Weight Recommendation (Keyboard Tray)11 Pounds
Minimum Height4.7 Inches
Maximum Height19.7 Inches

Warranty & Support

This FLEXISPOT product comes with a Limited Warranty. For specific details regarding warranty coverage and terms, please refer to the documentation included with your purchase or visit the official FLEXISPOT website.

Optional protection plans are available for extended coverage:

  • 2-Year Protection Plan
  • 3-Year Protection Plan
  • Complete Protect (monthly plan covering eligible past and future purchases)

For customer support, technical assistance, or inquiries, please contact the manufacturer, FLEXISPOT, directly through their official channels.

Related Documents - M7SB

Preview FlexiSpot M1B/M1W Sit-Stand Desk Converter Installation Guide
Step-by-step installation guide for the FlexiSpot M1B/M1W sit-stand desk converter, including specifications, parts list, safety warnings, and assembly instructions.
Preview FlexiSpot M7L-US Computer Riser Installation Guide and Warranty
Official installation guide and limited warranty information for the FlexiSpot M7L-US Sit-Stand Desktop Workstation. Learn how to assemble, use, and understand the warranty terms for your FlexiSpot computer riser.
Preview FlexiSpot EM7L Motorized Computer Riser Installation Guide
Comprehensive installation guide for the FlexiSpot EM7L Motorized Computer Riser. Features include specifications, parts list, step-by-step assembly instructions, troubleshooting tips, and limited warranty information.
Preview FLEXISPOT EM7MB Motorized Computer Riser Installation Guide
Installation guide for the FLEXISPOT EM7MB Motorized Computer Riser, detailing specifications, parts, assembly steps, troubleshooting, and warranty information for this sit-stand desk converter.
Preview FlexiSpot EM7L Motorized Computer Riser Installation Guide
Official installation guide for the FlexiSpot EM7L Motorized Computer Riser. Learn how to assemble, set up, and troubleshoot your sit-stand desk converter. Includes specifications, parts list, and warranty information.
Preview FlexiSpot ML2B/ML2W Computer Riser Installation Guide and Warranty
Comprehensive installation guide and limited warranty details for the FlexiSpot ML2B/ML2W Computer Riser. This sit-stand desktop workstation guide covers specifications, parts, assembly steps, usage instructions, and warranty coverage from FlexiSpot.