Goldair GIM-200S Ice Maker User Manual

1. Important Safety Instructions

To reduce the risk of fire, electric shock, or injury when using your ice maker, follow these basic precautions:

• Read all instructions before use.
• Do not touch the evaporator or ice basket when the unit is operating to avoid frostbite.
• Do not immerse the appliance, power cord, or plug in water or other liquids.
• Supervise children closely when the appliance is in use.
• Unplug the ice maker from the outlet when not in use, before cleaning, and before servicing.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
• Do not use outdoors.
• Do not place the appliance on or near a hot gas or electric burner, or in a heated oven.
• Ensure the power cord is not draped over the edge of a table or counter, or touching hot surfaces.
• Do not use the appliance for anything other than its intended purpose.
• Use only potable water for ice production.
• Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
• This appliance is intended for household use only.

2. Product Overview

The Goldair GIM-200S is a compact ice maker designed for convenient home use. It produces bullet-shaped ice cubes and can generate up to 25 kg of ice in 24 hours, with approximately 10 cubes per cycle.

Figure 1: Goldair GIM-200S Ice Maker. This image displays the silver-colored ice maker from a slightly elevated front-right angle, showing the control panel with indicator lights and buttons, and the Goldair logo.

Components:

• Control Panel: Features indicator lights for "Ice Full" and "Add Water", and buttons for operation.
• Ice Basket: Removable basket for collecting produced ice cubes.
• Water Reservoir: Internal tank for holding water to be converted into ice.
• Ice Scoop: For hygienic removal of ice cubes.
• Drain Plug: Located at the bottom for easy water drainage.
• Transparent Lid: Allows viewing of the ice making process.

3. Setup

3.1 Unpacking

1. Carefully remove the ice maker from its packaging.
2. Remove all packaging materials, including any tape or protective film.
3. Check for any damage during transit. If damaged, do not operate and contact your retailer.

3.2 Placement

• Place the ice maker on a stable, level surface, away from direct sunlight and heat sources (e.g., stoves, furnaces, radiators).
• Ensure there is at least 15 cm (6 inches) of clear space around the unit for proper ventilation.
• Do not block any ventilation openings on the appliance.
• Ensure the unit is placed in a well-ventilated area with an ambient temperature between 10°C and 32°C (50°F and 90°F).

3.3 Initial Cleaning

Before first use, clean the ice maker thoroughly.

1. Wash the ice basket and ice scoop in warm, soapy water. Rinse and dry thoroughly.
2. Clean the interior of the unit with a soft cloth dampened with warm water and a mild detergent. Rinse the interior with clean water and drain through the drain plug.
3. Wipe the exterior with a soft, damp cloth.
4. Allow the unit to air dry completely before plugging it in.

4. Operating Instructions

4.1 Filling the Water Reservoir

1. Open the transparent lid.
2. Remove the ice basket.
3. Fill the water reservoir with potable water up to the MAX fill line. Do not overfill.
4. Replace the ice basket and close the lid.

4.2 Starting Ice Production

1. Plug the ice maker into a grounded electrical outlet.
2. Press the "ON/OFF" button on the control panel to start the ice making cycle. The "Ice Making" indicator light will illuminate.
3. The first batch of ice may take slightly longer to produce and may be smaller. Discard the first few batches of ice.
4. The ice maker will automatically stop when the ice basket is full, and the "Ice Full" indicator light will illuminate.
5. When the "Add Water" indicator light illuminates, the water reservoir is low. Add more water and press the "ON/OFF" button to resume operation.

4.3 Removing Ice

Use the provided ice scoop to remove ice from the basket. For best results, transfer ice to a freezer for storage as the ice maker is not designed to be a freezer.

5. Maintenance and Cleaning

Regular cleaning and maintenance will ensure optimal performance and longevity of your ice maker.

5.1 Daily Cleaning

• Unplug the unit.
• Remove the ice basket and wash it.
• Drain any remaining water from the reservoir by removing the drain plug at the bottom of the unit.
• Wipe the interior with a soft, damp cloth.
• Dry all parts thoroughly before reassembling.

5.2 Periodic Deep Cleaning

Every few weeks, or if you notice a change in ice quality, perform a deep clean:

1. Unplug the ice maker and drain all water.
2. Prepare a cleaning solution of water and white vinegar (1:1 ratio) or a commercial ice maker cleaning solution.
3. Pour the solution into the water reservoir up to the MAX line.
4. Plug in the unit and run a few ice-making cycles. Discard all ice produced during this process.
5. Drain the cleaning solution completely.
6. Rinse the reservoir thoroughly with clean water, running several cycles with fresh water and discarding the ice.
7. Dry the interior and exterior completely.

5.3 Storage

If storing the ice maker for an extended period, ensure it is thoroughly cleaned and dried. Store in a cool, dry place.

6. Troubleshooting

7. Specifications

• Model: GIM-200S
• Brand: Goldair
• Material: Plastic
• Color: Silver
• Voltage: 230V
• Wattage: 180 Watt-hours
• Ice Production Capacity: Up to 25 kg / 24 hours
• Ice Cube Shape: Bullet
• Ice Cubes per Cycle: Approximately 10
• Water Reservoir Capacity: 2.8 Liters
• Product Dimensions (D x W x H): 37 cm x 28 cm x 33 cm
• Weight: 8 kg

8. Warranty and Support

Goldair products are manufactured to high standards and are warranted against manufacturing defects. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Goldair website.

For technical support, troubleshooting assistance, or spare parts, please contact Goldair customer service. Contact details can typically be found on the product packaging or the official Goldair website.

Manufacturer: Goldair