1. Product Overview
The SECUROAD 1100 Lumens Solar Motion Sensor Light is an outdoor lighting solution designed for security and convenience. It features a durable black aluminum alloy housing, high-efficiency monocrystalline solar panel, and a 4500mAh lithium-ion battery. With 46 high-quality LEDs, it delivers 1100 lumens of bright illumination and offers four versatile lighting modes to suit various outdoor applications.

Figure 1: Front view of the SECUROAD Solar Motion Sensor Light, showcasing the solar panel on top and LED array with motion sensor below.

Figure 2: The SECUROAD Solar Motion Sensor Light installed outdoors, providing wide illumination for a backyard area.
2. Package Contents
Verify that all items are present in your package:
- SECUROAD Solar Motion Sensor Light (Model HBT-1606BW)
- Explosion-proof batteries (type 18650, pre-installed)
- Mounting kit (screws and wall anchors)
- Instruction manual

Figure 3: Contents of the package, including the solar light, instruction manual, and mounting hardware.
3. Specifications
| Feature | Detail |
|---|---|
| Model Name | HBT-1606BW |
| Brightness | 1100 Lumens |
| Battery Capacity | 4500mAh Lithium-ion (18650 type) |
| Water Resistance | IP65 Waterproof |
| Material | Aluminum Alloy |
| Light Source | 46 LEDs |
| Motion Sensor Range | 120° detection, up to 26 feet |
| Color Temperature | Warm White (4000 Kelvin) |
| Product Dimensions | 9"L x 3.74"W x 4.13"H |
| Power Source | Solar Powered |
4. Setup & Installation
For optimal performance, install the solar light in a location that receives direct sunlight for at least 6-8 hours daily. Ensure the solar panel is unobstructed.
Installation Steps:
- Choose a suitable mounting location, such as a wall, fence, or post, ensuring it is vertically mounted with the light portion facing downwards to prevent water accumulation.
- Use the provided mounting kit (screws and wall anchors) to secure the light. Mark the positions for drilling using the light's mounting holes as a template.
- Drill holes, insert wall anchors if necessary, and then fasten the light securely with screws.

Figure 4: Visual guide for mounting the solar light on a wall, emphasizing vertical orientation.

Figure 5: Example installation above a garage, demonstrating solar power usage.
5. Operating Modes
The SECUROAD Solar Motion Sensor Light features a single button for power and mode selection. To turn on the light, press and hold the button for 5 seconds in a dark environment. Short presses will cycle through the modes.
Available Modes:
- Mode 1: Dim-Bright Mode
The light stays dim constantly and brightens to full intensity for 15 seconds when motion is detected. - Mode 2: Off-Bright Mode
The light remains off and turns on to full intensity for 15 seconds when motion is detected. - Mode 3: Constant Lighting Mode
The light stays on at a constant dim level throughout the night, without motion sensor functionality. - Mode 4: Emergency Lighting Mode
The light turns on to full intensity for 30 minutes, then turns off. This mode is activated by sensing external light (e.g., car headlights) and does not use the motion sensor.

Figure 6: Visual representation of the four distinct lighting modes and their behavior.

Figure 7: Illustration of the four versatile lighting modes in action, demonstrating how the light responds to motion or stays constant.
6. Maintenance
To ensure the longevity and optimal performance of your SECUROAD Solar Motion Sensor Light, follow these maintenance guidelines:
- Clean the Solar Panel: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, and debris. A clean panel ensures maximum sunlight absorption and efficient charging.
- Clear Obstructions: Periodically check that no tree branches, leaves, or other objects are blocking the solar panel or the motion sensor.
- Battery Care: The pre-installed 4500mAh lithium-ion battery is designed for over 5 years of use. Avoid extreme temperatures that could affect battery life.
- Inspect for Damage: Occasionally inspect the light's aluminum housing and PVC lampshade for any signs of damage or wear. The IP65 waterproof rating protects against typical outdoor conditions.
7. Troubleshooting
If you encounter issues with your solar light, consider the following common solutions:
- Light Not Turning On at Night:
Ensure the solar panel is receiving sufficient direct sunlight during the day. Relocate the light if necessary. Verify that the light is not in the 'Off' mode. - Light Not Brightening with Motion:
Check the selected operating mode. Modes 1 and 2 are motion-activated. Ensure the motion sensor is not obstructed and is within the 120° detection range and 26-foot distance. - Short Illumination Time:
This may indicate insufficient charging. Ensure the solar panel is clean and exposed to direct sunlight for a full day. Cold weather can also reduce battery efficiency. - Light Stays On Constantly (Dim):
The light might be in 'Constant Lighting Mode' (Mode 3). Cycle through the modes to select your preferred setting. - Light Not Responding to Button Presses:
Ensure the light has been sufficiently charged. If the battery is completely depleted, it may not respond immediately. Allow it to charge in direct sunlight for a day.
8. Warranty & Support
SECUROAD provides lifetime product support for your solar motion sensor light. For any questions, concerns, or assistance with your product, please refer to the contact information provided in your package or visit the official SECUROAD website for support resources.