Important Safety Instructions
Please read all instructions carefully before using this RENPHO 3D Foot Massager. Keep this manual for future reference. This device is a controlled medical device (Certification Number: 305AKBZX00048000) intended for general household use as a substitute for massage.
- Do not use if you have any pre-existing medical conditions without consulting a doctor.
- Keep out of reach of children.
- Do not immerse the unit in water or use it in wet environments.
- Unplug the device when not in use or before cleaning.
- Do not attempt to repair or disassemble the unit yourself. Contact customer support for assistance.
- Ensure the power cord is not damaged or pinched.
Product Overview
Key Features
- 3-in-1 Massage: Combines air compression, shiatsu kneading, and heat therapy.
- Adjustable Intensity: 3 levels for air pressure and 3 levels for kneading strength.
- Soothing Heat Function: Warms feet to 40℃-45℃ to promote circulation.
- Automatic Timer: 15-minute auto-off function for safety.
- Hygienic Design: Removable and washable antibacterial fabric cover.
Package Contents
- RENPHO 3D Foot Massager Main Unit
- Instruction Manual
Setup
Follow these steps to set up your foot massager:
- Unpack: Carefully remove the foot massager and all accessories from the packaging.
- Placement: Place the massager on a flat, stable surface. Ensure there is enough space around the unit for proper ventilation.
- Connect Power: Plug the power cord into a suitable electrical outlet.
- Prepare for Use: Ensure the inner fabric covers are properly installed before placing your feet inside.
Image: Front view of the RENPHO 3D Foot Massager, ready for use.
Operating Instructions
The control panel allows you to manage all functions of the foot massager.
Image: Detailed view of the control panel with various function buttons.
Controls and Functions
- Power Button (⏻): Press to turn the device on or off.
- Stop Button (■): Press for emergency stop, halting all functions immediately.
- Kneading Button (⟳): Adjusts kneading intensity through 3 levels (Low, Medium, High). Cycles from Medium → High → Low with each press when power is on.
- Heater Button (SSS): Activates or deactivates the heating function. The heater warms the foot area to approximately 40℃-45℃. For optimal heating, use for more than 10 minutes.
- Air Pressure Button (◎): Adjusts air compression intensity through 3 levels (Low, Medium, High). Cycles from Medium → High → Low with each press when power is on.
Using the Massager
- Sit comfortably and place your feet into the massager.
- Press the Power button to turn on the device.
- Select your desired air pressure level using the Air Pressure button. The 5 layers of airbags will envelop your feet, providing compression.
- Adjust the kneading intensity with the Kneading button. Internal rollers and kneading balls will stimulate pressure points on your soles.
- Activate the Heat function if desired for added warmth and improved circulation.
- The massager has a 15-minute automatic timer. It will turn off automatically after the session. You can manually stop it at any time using the Power or Stop button.
Image: Air compression massage on the foot.
Image: Shiatsu kneading massage with rollers.
Image: Heat function applied to the foot.
Maintenance
Proper maintenance ensures the longevity and hygiene of your foot massager.
Cleaning the Exterior
- Always unplug the device before cleaning.
- Wipe the exterior surface with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Ensure no liquid enters the device.
Cleaning the Inner Fabric Covers
The inner fabric covers are removable and washable for hygiene.
- Unzip and remove the inner fabric covers from the foot inserts.
- Hand wash the covers with mild detergent and cold water.
- Air dry completely before reattaching them to the massager. Do not tumble dry or iron.
Image: Removable inner fabric cover being washed.
Troubleshooting
If you encounter any issues, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Power cord not properly connected. No power from outlet. | Ensure the power cord is securely plugged into both the device and a working electrical outlet. Test the outlet with another device. |
| Massage intensity feels weak. | Intensity setting is too low. | Press the Kneading or Air Pressure button to increase the intensity level. |
| Heat function is not noticeable. | Heater not activated. Room temperature is low. Not enough time for heating. | Ensure the Heater function is turned on. Allow at least 10 minutes for the heater to reach optimal temperature. Room temperature can affect perceived warmth. |
| Unusual noise during operation. | Normal operating sounds. Foreign object inside. | Some operational noise from the air pump and rollers is normal. If the noise is excessive or unusual, discontinue use and contact customer support. |
Technical Specifications
| Specification | Value |
|---|---|
| Product Model Number | RP-FM069R |
| Manufacturer | RENPHO |
| Product Dimensions (L x W x H) | Approx. 48 cm x 43 cm x 37 cm |
| Product Weight | Approx. 5.7 kg |
| Power Source | Corded Electric |
| Target Body Part | Feet |
| Air Pressure Levels | 3 (40-80kPa ±15%) |
| Kneading Frequency | L: 15±5, M: 25±5, H: 35±5 times/minute |
| Heater Temperature | Below 50℃ (Optimal 40℃-45℃) |
| Rated Operation Time | 10 minutes |
| Medical Device Certification No. | 305AKBZX00048000 |
Warranty and Support
Warranty Information
RENPHO products come with a standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official RENPHO website for detailed warranty terms and conditions specific to your region.
Customer Support
For any questions, technical assistance, or warranty claims, please contact RENPHO customer support:
- Website: Visit the official RENPHO website for FAQs and support contact information.
- Email: Refer to your warranty card or the RENPHO website for the appropriate support email address.
- Phone: Check the RENPHO website for regional customer service phone numbers.
When contacting support, please have your product model number (RP-FM069R) and purchase details ready.
