1. Introduction
Thank you for choosing the Fockety 50cm Cold Rolled Steel Traffic Safety Bollard. This product is designed to provide effective traffic control, delineate parking spaces, and enhance safety in various environments. Constructed from durable cold-rolled steel, this bollard offers high hardness, strong compression resistance, and a long service life. Its bright warning colors ensure high visibility day and night.
Image 1.1: Fockety 50cm Cold Rolled Steel Traffic Safety Bollard in use.
2. Safety Information
Please read all safety instructions before installation and use. Failure to follow these instructions may result in property damage or injury.
- Ensure the installation surface is stable and capable of supporting the bollard securely.
- Use appropriate tools and personal protective equipment during installation.
- All sharp edges of the bollard have been rounded during manufacturing to prevent accidents. Handle with care during installation.
- Regularly inspect the bollard for any signs of damage or loosening of fasteners.
- Keep children and pets away from the installation area.
3. Package Contents
Verify that all components are present before beginning installation:
- 1 x Road Safety Bollard
- Mounting hardware (may vary, typically includes bolts for concrete installation)
4. Setup and Installation
The Fockety Traffic Safety Bollard is designed for outdoor use with a stable base for secure mounting.
- Choose Location: Select a suitable, stable surface for installation, such as concrete or asphalt. Ensure the area is clear of obstructions.
- Position Bollard: Place the bollard in the desired position. Mark the locations for drilling through the holes in the base plate.
- Drill Holes: Using an appropriate drill bit for your surface (e.g., masonry bit for concrete), drill holes at the marked locations. Ensure the depth is sufficient for the mounting hardware.
- Secure Bollard: Insert the mounting bolts into the drilled holes and through the bollard's base plate. Tighten securely using a wrench.
Image 4.1: Bollards with stable bases, suitable for outdoor installation.
Image 4.2: Detail of the bollard base, showing pre-drilled mounting holes.
5. Operating Instructions
The Fockety Traffic Safety Bollard is designed for straightforward use in various applications.
- Placement: Position the bollard to effectively delineate areas, control traffic flow, or mark hazards.
- Visibility: The bright yellow and black stripes provide high visibility during the day. The reflective properties enhance visibility in low-light conditions or at night.
- Linking Multiple Bollards: The top ring allows for connecting multiple bollards with chains (not included) to form a continuous barrier or fence.
Image 5.1: Multiple bollards connected by chains to form a barrier.
Image 5.2: Bollards providing effective warning in dark conditions.
Image 5.3: Detail of the bright, reflective warning colors.
Image 5.4: The top ring design for connecting chains.
6. Maintenance
To ensure the longevity and effectiveness of your traffic safety bollard, follow these maintenance guidelines:
- Cleaning: Wipe the bollard periodically with a damp cloth to remove dirt and debris. For stubborn stains, use a mild detergent and rinse thoroughly. Avoid abrasive cleaners that could damage the finish or reflective material.
- Inspection: Regularly check the bollard for any signs of damage, such as dents, scratches, or corrosion. Ensure the mounting bolts remain tight and secure.
- Reflective Material: Ensure the reflective stripes are clean and intact to maintain optimal visibility.
7. Troubleshooting
This section addresses common concerns you might encounter with your traffic safety bollard.
- Bollard is unstable after installation: Ensure all mounting bolts are fully tightened. Verify that the installation surface is even and structurally sound. If the surface is uneven, consider shims or re-installation on a more stable area.
- Reduced visibility of stripes: Clean the reflective stripes with a damp cloth and mild soap to remove dirt or grime that may be obscuring their reflectivity.
- Corrosion or rust appears: While made of cold-rolled steel, prolonged exposure to harsh elements without cleaning can lead to surface rust. Clean the affected area and apply a rust-inhibiting paint if necessary.
8. Specifications
| Feature | Specification |
|---|---|
| Product Type | Road Safety Bollard |
| Material | Cold Rolled Steel |
| Total Length | Approx. 50 cm (19.7 inches) |
| Chassis Diameter | Approx. 160 mm (6.3 inches) |
| Column Diameter | Approx. 114 mm (4.5 inches) |
| Package Dimensions | 49 x 16 x 16 cm |
| Package Weight | 900 g |
Note: There may be a slight error in the size measurements.
Image 8.1: Dimensional diagram of the bollard.
9. Warranty and Support
For any questions, concerns, or support regarding your Fockety 50cm Cold Rolled Steel Traffic Safety Bollard, please refer to your purchase documentation or contact the retailer where the product was acquired. Specific warranty details may vary by region and retailer.