1. Introduction
The Rapoo P3 Wireless Charging Pack is designed to provide continuous wireless charging for compatible Rapoo gaming and multi-device mice. This module allows for convenient power replenishment while the mouse is in use, eliminating the need for wired connections during operation. It is engineered for seamless integration and efficient performance.
2. What's in the Box
- 1 x P3 Wireless Charging Pack (Rechargeable Battery Module)
Figure 2.1: Front view of the Rapoo P3 Wireless Charging Pack.
3. Specifications
- Rated Voltage: 5V
- Rated Current: 350mA
- Charging Time: Approximately 3 hours
- Product Dimensions: 0.98in x 0.98in x 0.16in (25mm x 25mm x 4mm)
- Product Weight: 0.1oz (3g)
- Special Feature: Wireless Charging Pack
- Compatible with: Qi wireless charging protocol
Figure 3.1: Back view of the Rapoo P3 Wireless Charging Module with specifications.
4. Compatible Devices
The P3 Wireless Charging Pack is compatible with the following Rapoo mice:
- Gaming Mice:
- VT9 Pro
- VT9 Pro 4K
- VT3 PRO MAX
- VT3 Gen-2
- VT3 MAX Gen-2
- VT7
- VT7 MAX
- Multi-Device Mice:
- MT760
- MT760 PRO
5. Setup and Installation
The P3 Wireless Charging Pack is designed for easy installation. It connects to compatible mice via a magnetic mechanism.
- Locate the designated slot for the wireless charging module on the underside of your compatible Rapoo mouse. This slot is typically secured by a cover.
- Carefully remove the existing cover or module from the mouse.
- Align the Rapoo P3 Wireless Charging Pack with the slot. The magnetic connection will guide it into place.
- Gently press the module until it is securely seated and flush with the mouse's surface.
Once installed, the mouse is ready for wireless charging. Simply place the mouse on a compatible Qi wireless charging pad to begin charging.
Figure 5.1: Installation of the P3 Wireless Charging Pack into a compatible mouse.
6. Operation
The Rapoo P3 Wireless Charging Pack enables continuous wireless charging for your compatible mouse while it is in use. This module supports the Qi wireless charging protocol, allowing it to work with most standard Qi-compatible wireless charging pads (charging pad not included).
To charge your mouse wirelessly, ensure the P3 module is correctly installed and place the mouse on an active Qi wireless charging pad. The mouse will begin charging automatically.
Figure 6.1: Rapoo P3 Wireless Charging Pack shown with compatible mice on a mouse pad.
7. Important Safety Information
Caution: Do not plug a Type-C cable into the mouse while the P3 Wireless Charging Pack is installed and the mouse is being wirelessly charged. This action will activate wired charging simultaneously, which can result in damage to the product.
Always ensure the charging environment is dry and free from excessive heat. Avoid exposing the product to liquids or extreme temperatures.
8. Troubleshooting
- Mouse not charging wirelessly: Ensure the P3 module is correctly installed in the mouse. Verify that the wireless charging pad is powered on and functioning correctly. Reposition the mouse on the charging pad to ensure proper alignment with the charging coil.
- Slow charging: Ensure you are using a Qi-compatible wireless charging pad that provides sufficient power output. Charging speed can vary based on the charging pad and environmental factors.
- Product damage warning: Refer to Section 7 regarding simultaneous wired and wireless charging. Discontinue use if any unusual heat, smell, or deformation is observed.
9. Maintenance
To ensure the longevity and optimal performance of your Rapoo P3 Wireless Charging Pack, follow these maintenance guidelines:
- Keep the module clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Avoid dropping or subjecting the module to strong impacts.
- Store the module in a cool, dry place when not in use.
10. Warranty and Support
For warranty information and technical support, please refer to the official Rapoo website or contact your local distributor. Keep your purchase receipt as proof of purchase for warranty claims.