1. Introduction and Overview
This manual provides essential instructions for the assembly, operation, and maintenance of your FLEXISPOT E6 Essential 3-Stage Dual Motor Electric Standing Desk. Please read this manual thoroughly before assembly and use to ensure safe and efficient operation.
The FLEXISPOT E6 Essential desk features a robust 3-stage lift system, offering a wide height adjustment range from 23.6 inches to 48.8 inches. Its dual motors ensure quiet and smooth transitions, supporting up to 220 lbs. The desk includes a programmable controller with four memory height settings for personalized comfort. The 55.1" x 27.5" whole-piece desktop provides ample workspace and is made from FSC-Certified engineered wood.
Image: The FLEXISPOT E6 Essential standing desk in a home office setting.
2. Safety Information
Adherence to the following safety guidelines is crucial for preventing injury and damage to the product:
- Maximum Load Capacity: Do not exceed the maximum weight recommendation of 220 pounds (100 kg) on the desktop. Overloading can cause instability and damage.
- Proper Assembly: Ensure all components are correctly assembled and tightened according to the instructions to maintain stability.
- Anti-Collision System: The desk is equipped with an anti-collision system. However, always be aware of your surroundings and ensure no obstacles are in the desk's path during height adjustments.
- Children and Pets: Keep children and pets away from the desk during operation to prevent accidents.
- Power Supply: Use only the provided power adapter. Disconnect power before cleaning or maintenance.
- Liquid Spills: Avoid spilling liquids on the control panel or electrical components.
Image: Illustration of the desk's maximum load capacity.
3. Package Contents
Before beginning assembly, verify that all parts are present and undamaged. The package typically includes:
- Desktop (55.1" x 27.5" Whole-piece)
- Desk Frame (Legs, Crossbar, Feet)
- Control Panel
- Control Box
- Power Adapter and Cable
- Installation Tools (Hex keys, Screws)
- Cable Management Accessories
- Instruction Manual
Note: The desktop and frame may ship in separate packages.
4. Setup and Assembly
Assembly is recommended for one person, though an additional person may assist with handling larger components. Follow the step-by-step instructions provided in the included assembly guide. A drill may be required for certain pilot holes, as some pre-drilled holes may not align perfectly depending on the desktop size.
- Unpack Components: Carefully remove all parts from their packaging and lay them out on a clean, soft surface to prevent scratches.
- Assemble the Frame: Attach the lifting columns to the crossbar, ensuring all screws are securely fastened.
- Attach Feet: Secure the desk feet to the bottom of the lifting columns.
- Mount the Desktop: Place the desktop upside down on a soft surface. Position the assembled frame onto the desktop. Align the frame with the pre-drilled holes. If necessary, mark and drill new pilot holes before securing the desktop to the frame with the provided screws.
- Connect Electronics: Connect the control panel, motors, and power adapter to the control box. Ensure all connections are firm.
- Cable Management: Use the provided cable ties and clips to organize and secure all cables, preventing them from snagging during height adjustments.
- Initial Power-Up: Carefully flip the desk upright. Plug the power cable into a wall outlet.
Image: The assembled FLEXISPOT E6 Essential standing desk in an office environment.
5. Operating Instructions
Your FLEXISPOT E6 Essential desk is designed for intuitive operation. The intelligent keypad allows for easy height adjustments and memory settings.
5.1. Basic Height Adjustment
- Up Arrow (▲): Press and hold to raise the desk to your desired standing height.
- Down Arrow (▼): Press and hold to lower the desk to your desired sitting height.
- The LED display panel will show the current height in inches.
5.2. Setting Memory Positions
The control panel allows you to save up to four preferred height settings:
- Adjust the desk to your desired height using the up or down arrows.
- Press the 'M' button (or 'Set' button, depending on model) once. The display will flash 'S-'.
- Immediately press one of the numbered memory buttons (1, 2, 3, or 4) to save the current height to that position. The display will show the number you selected, confirming the setting.
- To recall a saved height, simply press the corresponding numbered memory button (1, 2, 3, or 4). The desk will automatically move to that preset height.
5.3. Anti-Collision System
The desk is equipped with an anti-collision feature. If the desktop encounters an obstacle during movement, it will automatically stop and reverse slightly to prevent damage. This sensitivity can often be adjusted or reset via specific button combinations (refer to the detailed assembly guide for specific instructions if needed).
Image: Detailed view of the intelligent keypad for height control.
Image: Height range guide for different user heights.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your standing desk.
- Cleaning: Wipe the desktop and frame with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Check Connections: Periodically inspect all electrical connections and screws to ensure they are secure. Tighten any loose screws.
- Cable Management: Ensure cables remain tidy and are not pinched or tangled, especially during desk movement.
7. Troubleshooting
If you encounter issues with your FLEXISPOT E6 Essential desk, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk does not move | Power cable disconnected; Control box or motor cable loose; Overload; System error. | Check all power and motor connections. Reduce weight on the desk. Perform a reset (refer to your detailed assembly guide for specific reset procedures). |
| Desk moves unevenly | Uneven weight distribution; Obstruction. | Distribute weight evenly on the desktop. Check for any obstructions under or around the desk. |
| Error code displayed | Specific system fault. | Refer to the detailed assembly guide for specific error code meanings and troubleshooting steps. Often, a reset can resolve minor errors. |
| Anti-collision system too sensitive/not sensitive enough | Sensitivity setting. | Consult the detailed assembly guide for instructions on adjusting the anti-collision sensitivity. |
If problems persist after attempting these solutions, please contact FLEXISPOT customer support.
8. Specifications
- Brand: FLEXISPOT
- Model Number: ET365
- Product Dimensions (D x W x H): 55.1" x 27.5" x 23.6"
- Desktop Size: 55.1" x 27.5" (Whole-piece)
- Height Range: 23.6" to 48.8"
- Maximum Load Capacity: 220 lbs (100 kg)
- Motor Type: Dual Motor, 3-Stage Lift System
- Noise Level: < 50 dB
- Desktop Material: Engineered Wood (FSC-Certified)
- Base Material: Metal
- Assembly Required: Yes (Recommended 1 person)
- Included Components: Installation Tools and Wire
- UPC: 810072846488
Image: Dimensional specifications of the desk.
9. Warranty and Support
FLEXISPOT stands behind the quality of its products. Your E6 Essential standing desk comes with the following warranty:
- Desk Frame and Motor: 5-year coverage
- Control Panel and Electronics: 2-year coverage
For warranty claims, technical assistance, or any questions regarding your product, please contact FLEXISPOT customer support. You can find contact information on the official FLEXISPOT website or through your purchase platform.
For more information, visit the official FLEXISPOT Store.
