Introduction
The sPOD BantamX 8 Circuit Wireless Switch Controller is a compact, solid-state power distribution system designed to manage up to eight accessories from your smartphone or tablet. This system simplifies wiring by eliminating the need for extensive dashboard modifications and provides advanced control features for various vehicle accessories.
This manual provides essential information for the proper setup, operation, and maintenance of your BantamX system. Please read it thoroughly before installation and use.
Image: The sPOD BantamX 8 Circuit Wireless Switch Controller, including the main module, a 36-inch battery cable, and a universal mounting bracket.
Product Features
- Wireless App Control: Manage accessories via the sPOD app on iOS or Android devices, offering on/off, dimming, and logic functions.
- 8 High Current Circuits: Each circuit is rated for 30A at 12.5V (12/24V compatible), with a 16-position terminal block for secure connections.
- Battery Protection: Integrated Low Voltage Cutoff (LVCO) prevents battery over-discharge.
- Expandable System: Two controller ports allow for expansion up to 32 channels. Features integrated Bluetooth for remote control and updates.
- Comprehensive Kit: Includes BantamX module, 36" battery cable set with 100A in-line fuse, universal mounting bracket, and necessary hardware.
Package Contents
Verify that all items are present in your package:
- 1 x sPOD BantamX Module
- 1 x 36-inch Battery Cable Set with 100A In-line Fuse
- 1 x Universal Mounting Bracket
- Hardware (screws, nuts, washers)
Setup and Installation
Proper installation is crucial for the safe and effective operation of your sPOD BantamX system. It is recommended that installation be performed by a qualified professional if you are not experienced with automotive electrical systems.
- Mounting the BantamX Module:
Select a clean and dry location for mounting the BantamX module. Use the provided universal mounting bracket and hardware to secure the module. Ensure adequate ventilation around the unit.
Image: An off-road vehicle equipped with the sPOD BantamX system, demonstrating its application in controlling external lighting for enhanced visibility during off-road activities.
- Connecting the Battery Cable:
Connect the 36-inch battery cable set directly to your vehicle's battery. The cable includes a 100A in-line fuse for protection. Ensure proper polarity: red to positive (+), black to negative (-).
- Wiring Accessories:
Connect your accessories to the 16-position terminal block on the BantamX module. Each circuit provides positive and negative terminals. The system is rated for up to 30A per circuit.
Video: An overview of the sPOD BantamX system, explaining its components and how it simplifies wiring for vehicle accessories. This video demonstrates the physical connections and the overall concept of the power distribution system.
- Connecting the Controller:
Connect your sPOD controller (touchscreen or physical switch panel) to one of the two Ethernet ports on the BantamX module using a standard Ethernet cable. This establishes communication between the controller and the power distribution unit.
- App Pairing (for Wireless Control):
Download the sPOD app from your device's app store (iOS/Android). Follow the in-app instructions to pair your smartphone or tablet with the BantamX module via Bluetooth for wireless control.
Operating Instructions
Once installed, the sPOD BantamX system offers flexible control over your vehicle's accessories.
- Using the Touchscreen Controller: Navigate through the touchscreen interface to select and activate individual circuits. The touchscreen allows for dimming and programming of various functions.
- Using Physical Switch Panels: If using a physical switch panel, simply toggle the corresponding switch to turn accessories on or off.
- Using the sPOD App: Open the sPOD app on your paired device. The app provides a graphical interface to control each circuit, adjust dimming levels, and set up custom logic for accessory operation.
- Low Voltage Cutoff (LVCO): The integrated LVCO feature automatically shuts off accessories if the battery voltage drops below a safe level, protecting your vehicle's starting battery.
Maintenance
The sPOD BantamX system is designed for durability and minimal maintenance. Follow these guidelines to ensure long-term performance:
- Regular Inspection: Periodically check all wiring connections for tightness and signs of corrosion. Ensure the module is free from debris and moisture.
- Cleanliness: Keep the BantamX module and controller clean. Use a soft, dry cloth to wipe surfaces. Avoid using harsh chemicals or abrasive cleaners.
- Firmware Updates: Check the sPOD website or app regularly for any available firmware updates for your BantamX module. Updates can improve performance and add new features.
- Fuse Replacement: The system includes a 100A in-line fuse. If an accessory circuit fails, check the individual accessory's fuse (if applicable) before checking the main system fuse. Replace with a fuse of the same rating.
Troubleshooting
If you encounter issues with your sPOD BantamX system, refer to the following common troubleshooting steps:
- Accessory Not Functioning:
- Verify that the accessory is properly connected to the BantamX terminal block.
- Check the accessory's power draw to ensure it does not exceed the 30A circuit limit.
- Inspect the accessory's fuse (if external) and the main 100A in-line fuse for the BantamX system.
- Ensure the BantamX module is receiving power from the vehicle battery.
- Controller Not Responding:
- For wired controllers, check the Ethernet cable connection between the controller and the BantamX module.
- For app control, ensure Bluetooth is enabled on your device and the app is properly paired with the BantamX module.
- Restart the sPOD app or your mobile device.
- Low Voltage Cutoff (LVCO) Activation:
If accessories shut off unexpectedly, check your vehicle's battery voltage. The LVCO feature activates to protect the battery from excessive discharge. Recharge or replace the battery if necessary.
For further assistance, contact sPOD customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | sPOD |
| Model Number | 870114 |
| Number of Circuits | 8 |
| Circuit Rating | 30A at 12.5V per circuit |
| Voltage Compatibility | 12V / 24V DC |
| Battery Cable Length | 36 inches |
| Main Fuse | 100A In-line |
| Control Interface | Wireless App (iOS/Android), Wired Controller (optional) |
| Connectivity | Bluetooth, 2x Ethernet Ports |
| Special Features | Low Voltage Cutoff (LVCO), Expandable up to 32 channels |
| Item Weight | 3.6 pounds |
| Product Dimensions | 13 x 8 x 9 inches |
Warranty and Support
The sPOD BantamX 8 Circuit Wireless Switch Controller is backed by a 5-year manufacturer warranty. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or any questions regarding your sPOD product, please contact sPOD customer service through their official website or the contact information provided with your purchase.
Please retain your proof of purchase for warranty validation.
