Important Safety Instructions
Please read all instructions carefully before operating the dehumidifier. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always connect the unit to a properly grounded electrical outlet.
- Do not operate the unit with a damaged power cord or plug.
- Do not block the air intake or exhaust vents.
- Ensure the unit is placed on a stable, level surface.
- Do not immerse the unit in water or allow water to enter electrical components.
- Unplug the unit before cleaning or performing any maintenance.
- Keep children and pets away from the operating unit.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Product Overview
The LUBAIR DY117P is a high-capacity dehumidifier designed for effective moisture removal in various environments, including crawl spaces, basements, and commercial spaces. It features a built-in pump for versatile drainage options and an automatic defrost function for efficient operation in cooler conditions.
Key Features
- High Capacity: Removes up to 53 pints/day (AHAM) or 113 pints/day (saturated conditions) for spaces up to 1,500 sq ft.
- Dual Drainage Options: Supports both gravity drain and built-in condensate pump with a 19.6 ft lifting distance.
- Auto Defrost: Automatically initiates defrost cycles when frost is detected on coils, operating efficiently between 41-104℉.
- User-Friendly Controls: Smart touch screen with a 33-inch extension cord for remote placement and a built-in humidity regulator.
- Compact Design: Dimensions of 19.3″D x 12.4″W x 14.15″H, suitable for crawl spaces, with 4 leveling feet and a portable rigid handle.
- Power Outage Memory: Resumes operation with previous settings after a power interruption.

Internal Components and Technology
- Efficient Compressor: Utilizes an internal threaded copper pipe for faster heat exchange.
- Durable Heat Exchangers: Aluminum grille with titanium-plated hydrophilic film for enhanced condensation and corrosion resistance.
- High-Speed Fan: Snail-shaped wind path design improves air circulation.
- Sensitive Sensor: Provides real-time humidity feedback for precise control.

Setup and Installation
Unpacking
Carefully remove the dehumidifier from its packaging. Inspect the unit for any shipping damage. Retain the packaging materials for future transport or storage.
Placement
Place the dehumidifier on a firm, level surface. For crawl spaces, the unit is equipped with 4 leveling feet for sturdy installation. It can also be hung using a joist hanging kit (not included) or placed directly on a level surface in basements or other large spaces. Ensure there is adequate clearance around the air intake and exhaust vents for optimal airflow.

Drainage Options
The LUBAIR DY117P offers two drainage methods: gravity drainage and pump drainage.
Gravity Drainage
For gravity drainage, connect the provided PVC hose directly to the gravity drainage outlet on the unit. Ensure the hose is sloped downwards to a floor drain or suitable receptacle, allowing water to flow out by gravity. Do not use a garden hose with internal threads as an extension hose for gravity drainage.
Pump Drainage
The unit features a built-in condensate pump, eliminating the need for an external pump. To use pump drainage, connect the PVC hose to the gravity drainage outlet and the rubber hose to the pump drainage outlet. Position the PVC hose outlet higher than the gravity drainage outlet. The internal water level sensor will detect rising water and activate the pump to discharge water up to 19.6 feet vertically or horizontally to a desired drainage location.


Operating Instructions
Control Panel
The dehumidifier features a smart touch screen control panel for easy operation. An included 33-inch extension cord allows for flexible placement of the control panel.
Initial Operation
- Plug the power cord into a grounded electrical outlet.
- Press the POWER button to turn on the unit.
- The display will show the current humidity level.
Humidity Settings
Use the UP and DOWN buttons to set your desired humidity level. The unit will operate to maintain the set humidity, ranging from 10% to 98% (±1%).
Timer Function
The 24-hour timer allows you to set specific ON/OFF times for the dehumidifier.
Auto Defrost Function
The dehumidifier is equipped with an automatic defrost system. If frost builds up on the evaporator coils, the unit will temporarily stop the compressor and run the fan to melt the frost. Once defrosting is complete, the dehumidifier will automatically resume normal operation. This ensures efficient performance in temperatures between 41℉ and 104℉.

Remote Control (Optional)
An optional remote control is available for separate purchase, allowing convenient adjustment of settings from a distance. It connects via a 30 ft remote control signal cable.

Maintenance
Filter Cleaning
The dehumidifier is equipped with a removable filter to protect internal components from dust and enhance performance. Regularly inspect and clean the filter to ensure optimal operation.
- Unplug the dehumidifier from the power outlet.
- Locate and remove the air filter.
- Clean the filter using a vacuum cleaner or wash it with warm, soapy water.
- Rinse the filter thoroughly and allow it to air dry completely before reinserting.
- Reinstall the dry filter and plug the unit back in.
Recommended cleaning frequency: Every 2-4 weeks, depending on usage and air quality.
General Cleaning
Wipe the exterior of the unit with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure no water enters the control panel or other electrical parts.
Troubleshooting
Before contacting customer support, please refer to the following table for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on | No power supply | Check if the power cord is securely plugged in. Verify the outlet has power. |
| Dehumidifier not collecting water | Humidity setting too high; Room temperature too low; Air filter clogged | Lower the humidity setting. Ensure room temperature is above 41℉. Clean the air filter. |
| Unit runs continuously but humidity does not decrease | Room size too large; Doors/windows open; Air filter clogged | Ensure the unit is appropriately sized for the space. Close all doors and windows. Clean the air filter. |
| Unusual noise during operation | Unit not level; Obstruction in fan; Loose parts | Ensure the unit is on a level surface. Check for any foreign objects near the fan. Contact support if noise persists. |
| Water leakage | Drain hose improperly connected or blocked; Unit not level | Check all drain hose connections for tightness and blockages. Ensure the unit is level. |
Specifications
Detailed technical specifications for the LUBAIR DY117P Dehumidifier.
| Specification | Value |
|---|---|
| Model Name | DY117P |
| Power Source | 120V-60Hz |
| Rated Power | 680W |
| Rated Current | 5.9A |
| Moisture Removal (80℉, 60%RH) | 53 Pints per Day |
| Moisture Removal (95℉, 90%RH) | 113 Pints per Day (14.12 gallons) |
| Floor Area Coverage | Up to 1500 Square Feet |
| Product Dimensions (D x W x H) | 19.3"D x 12.4"W x 14.15"H |
| Airflow Rate | 200 CFM |
| Refrigerant | R32 |
| COP | 1.85L/kWh |
| Operation Mode | Continuous |
| Humidity Setting Range | 10%-98% (±1%) |
| Working Temperature Range | 41℉-104℉ |
| Built-in Pump | Yes (19.6 ft lifting distance) |
| Timer | 1-24 Hours |
| Auto Defrost | Yes |

Warranty and Support
Warranty Policy
LUBAIR provides a limited warranty for the DY117P dehumidifier as detailed below. The warranty period begins from the day of delivery.
| Coverage | Time Limits | Description | Solutions |
|---|---|---|---|
| Refrigeration System | 5 Years | Compressor, Condenser, and Evaporator (Excluding labor and refrigerant) | Contact us to obtain a new electrical component or obtain a new unit. Paid services beyond the time limit. |
| Electronic Components | 3 Years | Display screen, Mainboard, Signal cable, etc. (Excluding labor) | Contact us to obtain new electronic components. Paid services beyond the time limit. |
| Consumable Accessories | 1 Year | Drain hose, Filter, Handle, Screws, etc. (Excluding labor) | Contact us to obtain new consumable accessories. Paid services beyond the time limit. |
| Overall Units | 1 Year | Functional failure, defect, or inferior workmanship as specified in national laws. (Excluding labor) | Contact us to get old for new service. |
| Overall Units | 30 Days | Nonfunctional problem | Artificial damage or loss of products or components do not comply with the 30 day return policy. |

Customer Support
For any requirements or issues, please contact LUBAIR customer support. We are committed to providing prompt assistance within 12 hours.
Please refer to your product packaging or the retailer's website for specific contact details.