1. Introduction
Thank you for choosing the HOMCOM Manual Recliner Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new recliner. Please read all instructions carefully before use and retain this manual for future reference.

Image 1.1: The HOMCOM Manual Recliner Chair in a beige finish, shown in an upright position within a living room environment.
2. Safety Information
- Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
- Assemble the chair on a soft, clean surface to prevent scratches.
- Keep children and pets away during assembly.
- Do not stand on the chair or use it as a step stool.
- Do not exceed the maximum weight capacity of 308 lbs (140 kg).
- Avoid placing the chair near heat sources or in direct sunlight to prevent material degradation.
- Always ensure the chair is stable before sitting or reclining.
3. Package Contents
Verify that all components are included in the package before beginning assembly. While specific part names may vary, a typical recliner package includes:
- Chair Backrest
- Chair Seat with Armrests and Footrest Mechanism
- Wood Base Assembly
- Hardware Pack (bolts, washers, Allen wrench, etc.)
4. Assembly Instructions
Assembly is required for this recliner chair. Follow these general steps. Refer to the included diagram for visual guidance.
- Attach the Backrest: Align the backrest with the seat base. Slide the backrest into the designated slots on the seat frame until it clicks securely into place.
- Secure the Backrest: Insert any provided pins or tighten bolts to firmly secure the backrest to the seat.
- Connect the Base: Carefully attach the chair's main body to the wood swivel base. Ensure all connection points are aligned and secured with the provided hardware.
- Final Check: Once assembled, gently rock and swivel the chair to ensure all connections are stable and secure.

Image 4.1: Dimensional diagram of the recliner chair, illustrating its measurements in both upright and fully reclined states.
5. Operating Instructions
5.1 Reclining Function
To recline the chair, locate the adjustment knob or lever on the side of the chair (typically beneath the armrest). Turn the knob or pull the lever to release the locking mechanism, then lean back to your desired angle, up to 135 degrees. Release the knob/lever to lock the position. To return to an upright position, push forward while releasing the mechanism.

Image 5.1: Visual guide to the reclining function, showing the chair adjusting to a 135-degree angle and a close-up of the control knob.
5.2 Extendable Footrest
To extend the footrest, locate the side knob or lever, usually on the outer side of the seat. Pull or push the knob/lever to release the footrest, allowing it to extend forward. To retract the footrest, apply gentle pressure with your legs while operating the knob/lever until it locks back into place.

Image 5.2: Demonstration of the extendable footrest, highlighting the mechanism for deployment and retraction.
5.3 360° Swivel Function
The chair is designed with a 360-degree swivel base, allowing for full rotation. Simply apply gentle force to rotate the chair in any direction while seated.

Image 5.3: Multiple views demonstrating the 360-degree swivel feature of the recliner chair.
5.4 Product Video
Video 5.4: Official product video demonstrating the features and functionality of the HOMCOM Manual Recliner Chair, including reclining and footrest operation.
6. Maintenance and Care
To ensure the longevity and appearance of your HOMCOM Manual Recliner Chair, follow these care instructions:
- Cleaning: Wipe clean with a damp cloth. Avoid harsh chemicals or abrasive cleaners, as these can damage the fabric and wood finish.
- Spills: Blot spills immediately with a clean, dry cloth. Do not rub.
- Regular Inspection: Periodically check all bolts and connections to ensure they remain tight. Retighten if necessary.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading of the fabric.
7. Troubleshooting
If you encounter any issues with your recliner, refer to the following common troubleshooting tips:
- Chair does not recline smoothly: Check for any obstructions in the reclining mechanism. Ensure all assembly bolts are securely tightened.
- Footrest does not extend/retract: Verify that the control knob/lever is fully engaged. Check for any foreign objects obstructing the footrest mechanism.
- Chair feels unstable: Recheck all assembly connections, especially those attaching the seat to the base and the backrest to the seat. Ensure the chair is on a flat, even surface.
- Squeaking noises: Apply a small amount of silicone-based lubricant to moving metal parts of the reclining or swivel mechanism. Avoid oil-based lubricants that can attract dust.
If problems persist, contact HOMCOM customer support for further assistance.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | HOMCOM |
| Model Name | Recliner Chair |
| Model Number | 839-849V80BG |
| Color | Beige |
| Material | Polyester (Seat), Eucalyptus Wood (Frame) |
| Fill Material | Foam |
| Upright Dimensions (W x D x H) | 26.75" x 33.75" x 39.25" |
| Reclined Dimensions (W x D x H) | 26.75" x 57.5" x 34.75" |
| Seat Height | 18.5 Inches |
| Seat Depth | 20.5 inches |
| Item Weight | 38 Pounds |
| Maximum Weight Recommendation | 308 Pounds |
| Reclining Angle | Up to 135° |
| Swivel | 360° |
| Assembly Required | Yes |
9. Warranty and Support
Warranty information for the HOMCOM Manual Recliner Chair (Model 839-849V80BG) is not provided in this document. For details regarding warranty coverage, returns, or technical support, please contact the retailer or manufacturer directly. Keep your purchase receipt as proof of purchase.







