Everycom LittleBoy 8W Stereo Sound Wireless Portable Bluetooth Speaker User Manual

Introduction

Thank you for purchasing the Everycom LittleBoy 8W Stereo Sound Wireless Portable Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker. Please read it carefully before use to ensure optimal performance and longevity of your device.

Image: The Everycom LittleBoy Bluetooth Speaker in white, showcasing its compact design and speaker grille.

What's in the Box

Verify that all items are present in the package:

• Everycom LittleBoy Bluetooth Speaker
• Type-C Charging Cable
• User Manual

Product Features

• 8W RMS Stereo Sound with Bass Boost Technology
• Up to 20 hours of Playtime
• True Wireless Stereo (TWS) for connecting two speakers
• Multiple Connectivity Options: Bluetooth 5.1, Aux Input, Micro SD Card Slot, USB Port
• Built-in Microphone for hands-free calling
• FM Radio (for outdoor use)
• Compact and Portable Design
• Type-C Charging

Image: Visual representation of key features including 20 hours playtime, 8 Watt stereo sound, and an inbuilt microphone.

Image: The Everycom LittleBoy speaker highlighting its Bass Boost capability.

Controls and Indicators

The speaker features intuitive controls for easy operation.

Image: Top panel of the Everycom LittleBoy speaker displaying its easy-to-use control buttons.

Refer to the diagram below for a detailed view of the connectivity ports:

Image: Rear view of the Everycom LittleBoy speaker, indicating the AUX input, Micro SD card slot, Type-C charging port, and USB slot.

• Power Button: Press and hold to turn on/off.
• Mode Button (M): Short press to switch between Bluetooth, FM Radio, Aux, and USB/SD modes.
• Play/Pause Button: Press to play or pause audio. During a call, press to answer/end.
• Volume Up (+): Short press to increase volume. Long press for next track.
• Volume Down (-): Short press to decrease volume. Long press for previous track.
• LED Indicator: Shows power status, charging status, and Bluetooth pairing status.

Setup

Initial Charging

Before first use, fully charge the speaker. Connect the provided Type-C charging cable to the speaker's charging port and the other end to a USB power adapter (not included). The LED indicator will show charging status and turn off or change color when fully charged.

Operating Instructions

Bluetooth Pairing

1. Turn on the speaker by pressing and holding the Power button. The speaker will enter Bluetooth pairing mode automatically, indicated by a flashing LED.
2. Enable Bluetooth on your device (smartphone, tablet, etc.).
3. Search for "LittleBoy" in the list of available Bluetooth devices and select it to pair.
4. Once paired, the LED indicator will stop flashing and remain solid, and you will hear a confirmation tone.
5. The speaker will automatically connect to the last paired device when turned on, if within range.

True Wireless Stereo (TWS) Function

The TWS feature allows you to connect two Everycom LittleBoy speakers for a stereo sound experience.

Image: Two Everycom LittleBoy speakers wirelessly connected, illustrating the TWS functionality for stereo sound.

1. Ensure both LittleBoy speakers are turned off.
2. Turn on both speakers. They will automatically enter Bluetooth pairing mode.
3. On one of the speakers (this will be your primary speaker), double-press the Mode (M) button. The speakers will attempt to connect to each other.
4. Once connected, you will hear a confirmation tone, and the LED indicator on the primary speaker will flash, while the secondary speaker's LED will remain solid.
5. Now, connect your device to the primary speaker via Bluetooth as described in the "Bluetooth Pairing" section.

FM Radio Mode

1. Turn on the speaker.
2. Press the Mode (M) button repeatedly until you enter FM Radio mode.
3. To auto-scan and save stations, press and hold the Play/Pause button. The speaker will scan and store available FM stations.
4. Use the Volume Up (+) and Volume Down (-) buttons to navigate between saved stations.
5. Note: FM functionality is optimized for outdoor use. Signal strength may vary indoors.

Aux Input Mode

1. Connect one end of a 3.5mm audio cable (not included) to the AUX port on the speaker.
2. Connect the other end to the audio output jack of your device.
3. Press the Mode (M) button until you enter Aux mode.
4. Audio will now play through the speaker from your connected device.

USB/Micro SD Card Playback

1. Insert a USB drive or a Micro SD card (with pre-loaded audio files) into the respective slot on the speaker.
2. The speaker will automatically switch to USB or Micro SD card mode and begin playing audio. If not, press the Mode (M) button to select the correct mode.
3. Use the Play/Pause, Volume Up (+), and Volume Down (-) buttons to control playback.

Hands-Free Calling

• When connected via Bluetooth, incoming calls will be announced.
• Press the Play/Pause button to answer an incoming call.
• Press the Play/Pause button again to end the call.
• Press and hold the Play/Pause button to reject an incoming call.

Charging the Speaker

When the battery is low, the speaker will indicate this with an audible alert or a flashing LED. Connect the provided Type-C charging cable to the speaker's charging port and a compatible USB power source. The LED indicator will illuminate during charging and typically turn off or change color once fully charged. A full charge provides up to 20 hours of playtime.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the speaker. Do not use abrasive cleaners or solvents.
• Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the speaker regularly, even if not in use for extended periods.
• Water Resistance: The speaker is indicated as waterproof. However, avoid submerging it in water or exposing it to heavy rain for prolonged periods. Ensure charging port covers are securely closed.

Troubleshooting

Specifications

Warranty and Support

The Everycom LittleBoy speaker comes with a 1-Year Manufacturer Warranty. This warranty covers manufacturing defects from the date of purchase.

For warranty claims or technical support, please contact Everycom customer service. Keep your purchase receipt as proof of purchase.

For more information, you may visit the Everycom Store on Amazon.